ISO/IEC 14763-2:2012/Amd 1:2015

ISO/IEC 14763-2
Edition 1.0 2015-09
INTERNATIONAL
STANDARD
AMENDMENT 1
Information technology – Implementation and operation of customer premises
cabling –
Part 2: Planning and installation

ISO/IEC 14763-2:2012-02/AMD1:2015-09(en)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about
ISO/IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address
below or your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
ISO/IEC 14763-2
Edition 1.0 2015-09
INTERNATIONAL
STANDARD
AMENDMENT 1
Information technology – Implementation and operation of customer premises

cabling –
Part 2: Planning and installation

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 35.200 ISBN 978-2-8322-2864-7

– 2 – ISO/IEC 14763-2:2012/AMD1:2015
© ISO/IEC 2015
FOREWORD
Amendment 1 to International Standard ISO/IEC 14763-2 has been prepared by
subcommittee 25: Interconnection of information technology equipment, of ISO/IEC joint
technical committee 1: Information technology.
This International Standard has been approved by vote of the member bodies, and the voting
results may be obtained from the address given on the second title page.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

_____________
3 Definitions and abbreviations
3.1 Terms and definitions
Add, at the end of the existing list, after 3.1.63, the following new terms and definitions:
3.1.64
automated infrastructure management system
AIM system
integrated hardware and software which automatically detects the insertion or removal of cords
and documents the cabling infrastructure including connected equipment enabling
management of the infrastructure and data exchange with other systems
3.1.65
discoverable equipment
equipment with a network address
Note 1 to entry: Discoverable equipment could be treated as non-discoverable equipment per end user choice.
3.2 Abbreviations
Insert in the list of abbreviations, after "AC", the following new abbreviation:
AIM automated infrastructure management
Insert in the list of abbreviations, after "LV", the following new abbreviation:
MAC move, add, change
Table 14 – Minimum requirements of operational administration systems
Replace, in the 9th row, "Operational complexity" by "Operational complexity level".
Replace, in the 10th row, "(see Note 2)" by "(see Notes 2 and 3)".
Replace, in the 11th row, "(see Note 2)" by "(see Note 3)".

ISO/IEC 14763-2:2012/AMD1:2015 – 3 –
© ISO/IEC 2015
Replace, in NOTE 2, the last sentence of the first paragraph, by the following new paragraph
and make this NOTE 3:
NOTE 3 Automated records include the data from automated infrastructure management (AIM) systems that
detect connection/disconnection of cords and the presence of discoverable equipment connected to the network.
Requirements and recommendations for specifying and operating AIM systems are provided in Annex H.
nd rd
Delete, in NOTE 2, the existing 2 and 3 paragraphs.

Table 22 – Recommendations of operational administration systems
Replace, in the 3rd row, "Operational complexity" by "Operational complexity level".
Replace, in the NOTE, the last sentence of the first paragraph, by the following new paragraph:
Automated records include the data from AIM systems that detect connection/disconnection of cords and the
presence of discoverable equipment connected to the network. Requirements and recommendations for specifying
and operating AIM systems are provided in Annex H.
nd
Delete, in the NOTE, the existing 2 paragraph.
...