Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers

Corrigendum 1 - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-6 : Exigences particulières pour les marteaux portatifs

General Information

Status
Published
Publication Date
16-Oct-2024
Current Stage
PPUB - Publication issued
Start Date
26-Nov-2024
Completion Date
17-Oct-2024
Ref Project

Relations

Buy Standard

Standard
IEC 62841-2-6:2020/COR1:2024 - Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers Released:17. 10. 2024
English and French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 62841-2-6 IEC 62841-2-6
Edition 1.0  2020-07 Édition 1.0  2020-07

ELECTRIC MOTOR-OPERATED HAND-HELD OUTILS ÉLECTROPORTATIFS À MOTEUR,
TOOLS, TRANSPORTABLE TOOLS AND LAWN OUTILS PORTABLES ET MACHINES POUR
AND GARDEN MACHINERY – SAFETY – JARDINS ET PELOUSES – SÉCURITÉ –

Part 2-6: Particular requirements for hand-held Partie 2-6: Exigences particulières pour les
hammers marteaux portatifs
CO RRI G E NDUM 1
Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.

Annex I – Measurement of noise and vibration emissions
Replace the first row of Table I.102, modified by Amendment 1, with the following new text:
Table I.102 – Noise test conditions for rotary hammers
Orientation Drilling vertically down into a concrete block having the formulation specified in Table I.103 and
having the minimum dimensions 500 mm × 500 mm and 200 mm in height and supported on
resilient material. The concrete block, its support and the tool shall be so oriented that
– the geometric centre of the tool is 1 m above the reflecting plane;
– the centre of the concrete block is located under the top microphone "5"; as shown in
Figure I.2 of Part 1; and
– the sides of the concrete block are parallel to the square formed by the microphones "1"
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.