Smart city standards inventory and mapping - Part 1: Methodology

IEC SRD 63233-1:2022 The smart city standards inventory and mapping project was initiated to provide a systematic approach to retrieve and map the standards of smart cities on smart city reference architectures, models or frameworks and provide fundamental support for the collaborative work of standard-setters and users. Standards maps are the practical base for helping SDOs and users to identify directly and instantly the standards that are needed for any aspects of smart cities (citizen services, city infrastructure, governance, etc.). Standards maps also help in identifying the standardization gap in the ecosystem.

General Information

Status
Published
Publication Date
13-Jun-2022
Current Stage
PPUB - Publication issued
Start Date
04-Jul-2022
Completion Date
14-Jun-2022
Ref Project

Buy Standard

Standard
IEC SRD 63233-1:2022 - Smart city standards inventory and mapping - Part 1: Methodology
English language
24 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC SRD 63233-1 ®
Edition 1.0 2022-06
SYSTEMS
REFERENCE DELIVERABLE
colour
inside
Smart city standards inventory and mapping –
Part 1: Methodology
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC SRD 63233-1 ®
Edition 1.0 2022-06
SYSTEMS
REFERENCE DELIVERABLE
colour
inside
Smart city standards inventory and mapping –

Part 1: Methodology
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 03.100.70; 13.020.20 ISBN 978-2-8322-2351-2

– 2 – IEC SRD 63233-1:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Systematic approach to standards inventory building and mapping . 7
5 Smart city standards inventory building. 8
5.1 Smart city standards identification . 8
5.1.1 Guiding principles . 8
5.1.2 Criteria for smart city standards . 10
5.1.3 Correlation analysis method . 10
5.1.4 Use case based method . 10
5.2 Structured catalogue of smart city standards . 12
5.2.1 Basic principles of structuring the standards catalogue . 12
5.2.2 Vocabulary for classification of standards . 12
5.3 Maintenance and update of standards inventory . 14
6 Smart city standards mapping . 15
6.1 Mapping process . 15
6.2 Map user and need analysis . 15
6.3 Architecture model selection for standards mapping . 15
6.4 Tags based clustering method for mapping . 15
6.4.1 Standards association network . 15
6.4.2 Mapping relationships . 17
6.5 Visualization of standards map . 17
Annex A (informative) Searching keywords and query combinations for smart city
standards inventory . 18
Annex B (informative) Tags of standards . 21
Bibliography . 23

Figure 1 – Steps to perform inventory and mapping . 7
Figure 2 – A basic structure for smart city standards inventory . 9
Figure 3 – Procedure to identify relevant standards using use case analysis . 11
Figure 4 – A standards association network diagram . 17

Table 1 – Relationship of standards . 16
Table A.1 – Keywords for inventory . 18
Table A.2 – Query combinations . 20
Table B.1 – Tags of some standards . 21

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SMART CITY STANDARDS INVENTORY AND MAPPING –

Part 1: Methodology
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC SRD 63233-1 has been prepared by IEC systems committee Smart Cities: Electrotechnical
aspects of Smart Cities. It is a Systems Reference Deliverable.
The text of this Systems Reference Deliverable is based on the following documents:
Draft Report on voting
SyCSmartCities/232/DTS SyCSmartCities /254/RVDTS

Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Systems Reference Deliverable is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.

– 4 – IEC SRD 63233-1:2022 © IEC 2022
A list of all parts in the IEC SRD 63233 series, published under the general title Smart city
standards inventory and mapping, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.

INTRODUCTION
International, and regional standards development organizations (SDOs), as well as consortia
and national standardization institutions, have been vigorously promoting the development of
smart city standards. But different organizations focus on standards at different levels of smart
cities and the effective coordination in the standards development process needs to be
strengthened. At present, there is no overall architectural understanding of standards of smart
cities.
The smart city standards inventory and mapping project was initiated to provide a systematic
approach to retrieve and map the standards of smart cities on smart city reference architectures,
models or frameworks and provide fundamental support for the collaborative work of standard-
setters and users. Standards maps are the practical base for helping SDOs and users to identify
directly and instantly the standards that are needed for any aspects of smart cities (citizen
services, city infrastructure, governance, etc.). Standards maps also help in identifying the
standardization gap in the ecosystem.

– 6 – IEC SRD 63233-1:2022 © IEC 2022
SMART CITY STANDARDS INVENTORY AND MAPPING –

Part 1: Methodology
1 Scope
This part of IEC SRD 63233, which is a Systems Reference Deliverable, describes a systematic
approach to carry out smart city standards analysis based on the IEC systems approach. It
gives methods for developing smart city standards inventory and mapping.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at https://www.electropedia.org/
• ISO Online browsing platform: available at https://www.iso.org/obp
3.1
domain
field of special knowledge
[SOURCE: ISO 10241-1:2011, 3.3.1]
3.2
stakeholder
individual or organization having a right, share, claim or interest in a system or in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.