IEC 61784-5-19:2024
(Main)Industrial networks - Profiles - Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19
Industrial networks - Profiles - Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19
IEC 61784-5-19:2024 is available as IEC 61784-5-19:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61784-5-19:2024 specifies the installation profile for CPF 19 (MECHATROLINKTM[1]). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018, IEC 61918:2018/AMD1:2022 and IEC 61918:2018/AMD2:2024.
[1] MECHATROLINKTM and Σ-LINKTM II are trade names of YASKAWA ELECTRIC CORPORATION. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trade names holder or any of its products. Compliance to this profile does not require use of the trade names. Use of the trade name requires permission of the trade name holder.
Réseaux industriels - Profils - Partie 5-19: Installation des bus de terrain - Profils d'installation pour CPF 19
IEC 61784-5-19:2024 est disponible sous forme de IEC 61784-5-19:2024 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 61784-5-19:2024 définit les profils d’installation pour la CPF 19 (MECHATROLINKTM[1]). Les profils d’installation sont spécifiés dans les annexes. Ces annexes doivent être utilisées conjointement avec l’IEC 61918:2018, l’IEC 61918:2018/AMD1:2022 et l’IEC 61918:2018/AMD2:2024.
[1] MECHATROLINKTM et Σ-LINKTM II sont des appellations commerciales de YASKAWA ELECTRIC CORPORATION. Cette information est donnée à l’intention des utilisateurs du présent document et ne signifie nullement que l’IEC approuve ou recommande l’organisation détentrice de l’appellation commerciale, ni un quelconque de ses produits. La conformité n’exige pas l’utilisation des appellations commerciales. L’utilisation de l’appellation commerciale exige l’autorisation du détenteur de celle-ci.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61784-5-19 ®
Edition 2.0 2024-04
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 5-19: Installation of fieldbuses – Installation profiles for CPF 19
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.
IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.
Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 61784-5-19 ®
Edition 2.0 2024-04
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 5-19: Installation of fieldbuses – Installation profiles for CPF 19
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.40 ISBN 978-2-8322-8697-5
– 2 – IEC 61784-5-19:2024 RLV © IEC 2024
CONTENTS
FOREWORD . 7
INTRODUCTION . 2
1 Scope . 11
2 Normative references . 11
3 Terms, definitions and abbreviated terms . 11
4 CPF19: Overview of installation profiles . 12
5 Installation profile conventions. 12
6 Conformance to installation profiles . 13
Annex A (normative) CP 19/1 (MECHATROLINK™-II) specific installation profile . 14
A.1 Installation profile scope . 14
A.2 Normative references . 14
A.3 Installation profile terms, definitions, and abbreviated terms . 14
A.3.1 Terms and definitions . 14
A.3.2 Abbreviated terms . 14
A.3.3 Conventions for installation profiles . 14
A.4 Installation planning . 15
A.4.1 General . 15
A.4.2 Planning requirements . 15
A.4.3 Network capabilities . 15
A.4.4 Selection and use of cabling components . 17
4.4.3.3.1Common description . 22
A.4.5 Cabling planning documentation . 25
A.4.6 Verification of cabling planning specification . 25
A.5 Installation implementation. 25
A.5.1 General requirements . 25
A.5.2 Cable installation . 25
A.5.3 Connector installation . 27
A.5.4 Terminator installation . 28
A.5.5 Device installation . 28
A.5.6 Coding and labelling . 28
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 28
A.5.8 As-implemented cabling documentation . 28
A.6 Installation verification and installation acceptance test . 29
A.6.1 General . 29
A.6.2 Installation verification . 29
A.6.3 Installation acceptance test . 30
A.7 Installation administration . 30
A.8 Installation maintenance and installation troubleshooting . 31
A.8.1 General . 31
A.8.2 Maintenance . 31
A.8.3 Troubleshooting . 31
A.8.4 Specific requirements for maintenance and troubleshooting . 31
Annex B (normative) CP 19/2 (MECHATROLINK™-III) specific installation profile . 33
B.1 Installation profile scope . 33
B.2 Normative references . 33
B.3 Installation profile terms, definitions, and abbreviated terms . 33
B.3.1 Terms and definitions . 33
B.3.2 Abbreviated terms . 33
B.3.3 Conventions for installation profiles . 33
B.4 Installation planning . 33
B.4.1 General . 33
B.4.2 Planning requirements . 33
B.4.3 Network capabilities . 34
B.4.4 Selection and use of cabling components . 35
B.4.5 Cabling planning documentation . 41
B.4.6 Verification of cabling planning specification . 42
B.5 Installation implementation. 42
B.5.1 General requirements . 42
B.5.2 Cable installation . 42
B.5.3 Connector installation . 43
B.5.4 Terminator installation . 44
B.5.5 Device installation . 44
B.5.6 Coding and labelling . 44
B.5.7 Earthing and bonding of equipment and devices and shield cabling . 44
B.5.8 As-implemented cabling documentation . 44
B.6 Installation verification and installation acceptance test . 44
B.6.1 General . 44
B.6.2 Installation verification . 44
B.6.3 Installation acceptance test . 45
B.7 Installation administration . 46
B.8 Installation maintenance and installation troubleshooting . 46
Annex C (normative) CP19/3 (Σ-LINK™ II) specific installation profile . 47
C.1 Installation profile scope . 47
C.2 Normative references . 47
C.3 Installation profile terms, definitions, and abbreviated terms . 47
C.3.1 Terms and definitions . 47
C.3.2 Abbreviated terms . 47
C.3.3 Conventions for installation profiles . 47
C.4 Installation planning . 47
C.4.1 General . 47
C.4.2 Planning requirements . 47
C.4.3 Network capabilities . 48
C.4.4 Selection and use of cabling components . 49
C.4.5 Cabling planning documentation . 61
C.4.6 Verification of cabling planning specification . 61
C.5 Installation implementation. 61
C.5.1 General requirements . 61
C.5.2 Cable installation . 62
C.5.3 Connector installation . 63
C.5.4 Terminator installation . 64
C.5.5 Device installation . 64
C.5.6 Coding and labelling . 64
C.5.7 Earthing and bonding of equipment and devices and shield cabling . 64
C.5.8 As-implemented cabling documentation . 64
C.6 Installation verification and installation acceptance test . 64
– 4 – IEC 61784-5-19:2024 RLV © IEC 2024
C.6.1 General . 64
C.6.2 Installation verification . 64
C.6.3 Installation acceptance test . 65
C.7 Installation administration .
...
IEC 61784-5-19 ®
Edition 2.0 2024-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial networks – Profiles –
Part 5-19: Installation of fieldbuses – Installation profiles for CPF 19
Réseaux industriels – Profils –
Partie 5-19: Installation des bus de terrain – Profils d'installation pour CPF 19
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.
IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.
Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications, symboles
en utilisant différents critères (numéro de référence, texte, graphiques et le glossaire. Avec un abonnement, vous aurez
comité d’études, …). Elle donne aussi des informations sur les toujours accès à un contenu à jour adapté à vos besoins.
projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 500 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalents dans 25 langues
Disponible en ligne et une fois par mois par email.
additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 61784-5-19 ®
Edition 2.0 2024-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial networks – Profiles –
Part 5-19: Installation of fieldbuses – Installation profiles for CPF 19
Réseaux industriels – Profils –
Partie 5-19: Installation des bus de terrain – Profils d'installation pour CPF 19
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40, 35.100.40 ISBN 978-2-8322-8351-6
– 2 – IEC 61784-5-19:2024 © IEC 2024
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms, definitions and abbreviated terms . 10
4 CPF19: Overview of installation profiles . 10
5 Installation profile conventions. 11
6 Conformance to installation profiles . 12
Annex A (normative) CP 19/1 (MECHATROLINK™-II) specific installation profile . 13
A.1 Installation profile scope . 13
A.2 Normative references . 13
A.3 Installation profile terms, definitions, and abbreviated terms . 13
A.3.1 Terms and definitions . 13
A.3.2 Abbreviated terms . 13
A.3.3 Conventions for installation profiles . 13
A.4 Installation planning . 14
A.4.1 General . 14
A.4.2 Planning requirements . 14
A.4.3 Network capabilities . 14
A.4.4 Selection and use of cabling components . 16
4.4.3.3.1Common description . 21
A.4.5 Cabling planning documentation . 24
A.4.6 Verification of cabling planning specification . 24
A.5 Installation implementation. 24
A.5.1 General requirements . 24
A.5.2 Cable installation . 24
A.5.3 Connector installation . 26
A.5.4 Terminator installation . 27
A.5.5 Device installation . 27
A.5.6 Coding and labelling . 27
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 27
A.5.8 As-implemented cabling documentation . 27
A.6 Installation verification and installation acceptance test . 28
A.6.1 General . 28
A.6.2 Installation verification . 28
A.6.3 Installation acceptance test . 29
A.7 Installation administration . 29
A.8 Installation maintenance and installation troubleshooting . 30
A.8.1 General . 30
A.8.2 Maintenance . 30
A.8.3 Troubleshooting . 30
A.8.4 Specific requirements for maintenance and troubleshooting . 30
Annex B (normative) CP 19/2 (MECHATROLINK™-III) specific installation profile . 32
B.1 Installation profile scope . 32
B.2 Normative references . 32
B.3 Installation profile terms, definitions, and abbreviated terms . 32
B.3.1 Terms and definitions . 32
B.3.2 Abbreviated terms . 32
B.3.3 Conventions for installation profiles . 32
B.4 Installation planning . 32
B.4.1 General . 32
B.4.2 Planning requirements . 32
B.4.3 Network capabilities . 33
B.4.4 Selection and use of cabling components . 34
B.4.5 Cabling planning documentation . 39
B.4.6 Verification of cabling planning specification . 39
B.5 Installation implementation. 39
B.5.1 General requirements . 39
B.5.2 Cable installation . 39
B.5.3 Connector installation . 40
B.5.4 Terminator installation . 41
B.5.5 Device installation . 41
B.5.6 Coding and labelling . 41
B.5.7 Earthing and bonding of equipment and devices and shield cabling . 41
B.5.8 As-implemented cabling documentation . 41
B.6 Installation verification and installation acceptance test . 42
B.6.1 General . 42
B.6.2 Installation verification . 42
B.6.3 Installation acceptance test . 43
B.7 Installation administration . 43
B.8 Installation maintenance and installation troubleshooting . 43
Annex C (normative) CP19/3 (Σ-LINK™ II) specific installation profile . 44
C.1 Installation profile scope . 44
C.2 Normative references . 44
C.3 Installation profile terms, def
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.