Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2

IEC 61784-5-2:2018 specifies the installation profiles for CPF 2 (CIP™ ). This contribution contains a number of related files covering the communication profiles to be used in conjunction with IEC 61918. The installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918. This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) references to ISO/IEC 24702 have been replaced with references to ISO/IEC 11801-3 in Table B.1;
b) errors have been corrected;
c) Tables B11 and B13 have been added in support of 1,000 Mb/s 4 Pair Ethernet;
d) Clarification of dual power supplies for Annex C.

Réseaux de communication industriels - Profils - Partie 5-2: Installation des bus de terrain - Profils d’installation pour CPF 2

L‘IEC 61784-5-2:2018 spécifie les profils d'installation pour le CPF 2 (CIP™ ). La présente contribution contient un certain nombre de fichiers associés couvrant les profils de communication à utiliser conjointement avec la CEI 61918. Les documents de profil d'installation contenus ci-joint fournissent les profils d'installation des profils de communication (CP) d'une famille de profils de communication (CPF) spécifique en indiquant quelles exigences de la CEI 61918 s'appliquent pleinement et, le cas échéant, en complétant, modifiant ou remplaçant les autres exigences. Les profils d'installation sont spécifiés dans les annexes. Ces annexes sont lues conjointement avec la CEI 61918. Cette quatrième édition annule et remplace la troisième édition publiée en 2013. Cette édition constitue une révision technique.
Cette édition comprend les modifications techniques significatives suivantes par rapport à l'édition précédente :
a) les références à l'ISO/IEC 24702 ont été remplacées par des références à l'ISO/IEC 11801-3 dans le Tableau B.1 ;
b) des erreurs ont été corrigées ;
c) Les Tableaux B11 et B13 ont été ajoutés pour prendre en charge l'Ethernet à 4 paires de 1,000 Mb/s ;
d) Clarification des alimentations doubles pour l'Annexe C.

General Information

Status
Published
Publication Date
20-Mar-2024
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
03-Aug-2018
Completion Date
30-Aug-2018
Ref Project

Relations

Buy Standard

Standard
IEC 61784-5-2:2018 - Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2
English language
163 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61784-5-2:2018+AMD1:2024 CSV - Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 Released:3/21/2024 Isbn:9782832286241
English language
334 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61784-5-2:2018 - Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2
English and French language
354 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61784-5-2 ®
Edition 4.0 2018-08
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 5-2: Installation of fieldbuses – Installation profiles for CPF 2

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 61784-5-2 ®
Edition 4.0 2018-08
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –

Part 5-2: Installation of fieldbuses – Installation profiles for CPF 2

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.40 ISBN 978-2-8322-5938-2

– 2 – IEC 61784-5-2:2018 © IEC 2018
CONTENTS
FOREWORD . 10
INTRODUCTION . 12
1 Scope . 13
2 Normative references . 13
3 Terms, definitions and abbreviated terms . 13
4 CPF 2: Overview of installation profiles . 13
5 Installation profile conventions . 14
6 Conformance to installation profiles . 15
Annex A (normative) CP 2/1 (ControlNet™) specific installation profile . 16
A.1 Installation profile scope . 16
A.2 Normative references . 16
A.3 Installation profile terms, definitions, and abbreviated terms . 16
A.3.1 Terms and definitions. 16
A.3.2 Abbreviated terms . 16
A.3.3 Conventions for installation profiles . 16
A.4 Installation planning . 17
A.4.1 General . 17
A.4.2 Planning requirements . 18
A.4.3 Network capabilities . 19
A.4.4 Selection and use of cabling components . 25
A.4.5 Cabling planning documentation . 43
A.4.6 Verification of cabling planning specification . 43
A.5 Installation implementation . 43
A.5.1 General requirements . 43
A.5.2 Cable installation . 43
A.5.3 Connector installation . 45
A.5.4 Terminator installation . 54
A.5.5 Device installation . 54
A.5.6 Coding and labelling . 56
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 57
A.5.8 As-implemented cabling documentation . 58
A.6 Installation verification and installation acceptance test . 58
A.6.1 General . 58
A.6.2 Installation verification . 58
A.6.3 Installation acceptance test . 61
A.7 Installation administration . 63
A.8 Installation maintenance and installation troubleshooting . 63
A.8.1 General . 63
A.8.2 Maintenance . 63
A.8.3 Troubleshooting . 63
A.8.4 Specific requirements for maintenance and troubleshooting . 68
Annex B (normative) CP 2/2 (EtherNet/IP™) specific installation profile . 69
B.1 Installation profile scope . 69

B.2 Normative references . 69
B.3 Installation profile terms, definitions, and abbreviated terms . 69
B.3.1 Terms and definitions. 69
B.3.2 Abbreviated terms . 69
B.3.3 Conventions for installation profiles . 70
B.4 Installation planning . 70
B.4.1 General . 70
B.4.2 Planning requirements . 71
B.4.3 Network capabilities . 71
B.4.4 Selection and use of cabling components . 76
B.4.5 Cabling planning documentation . 92
B.4.6 Verification of cabling planning specification . 92
B.5 Installation implementation . 92
B.5.1 General requirements . 92
B.5.2 Cable installation . 92
B.5.3 Connector installation . 93
B.5.4 Terminator installation . 94
B.5.5 Device installation . 94
B.5.6 Coding and labelling . 94
B.5.7 Earthing and bonding of equipment and devices and shield cabling . 94
B.5.8 As-implemented cabling documentation . 96
B.6 Installation verification and installation acceptance test . 96
B.6.1 General . 96
B.6.2 Installation verification . 96
B.6.3 Installation acceptance test . 98
B.7 Installation administration . 99
B.8 Installation maintenance and installation troubleshooting . 99
Annex C (normative) CP 2/3 (DeviceNet™) specific installation profile . 100
C.1 Installation profile scope . 100
C.2 Normative references . 100
C.3 Installation profile terms, definitions, and abbreviated terms . 100
C.3.1 Terms and definitions. 100
C.3.2 Abbreviated terms . 100
C.3.3 Conventions for installation profiles . 100
C.4 Installation planning . 101
C.4.1 General . 101
C.4.2 Planning requirements . 102
C.4.3 Network capabilities . 103
C.4.4 Selection and use of cabling components . 119
C.4.5 Cabling planning documentation . 129
C.4.6 Verification of cabling planning specification . 129
C.5 Installation implementation . 129
C.5.1 General requirements . 129
C.5.2 Cable installation . 129
C.5.3 Connector installation . 131

– 4 – IEC 61784-5-2:2018 © IEC 2018
C.5.4 Terminator installation . 144
C.5.5 Device installation .
...


IEC 61784-5-2 ®
Edition 4.1 2024-03
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 5-2: Installation of fieldbuses – Installation profiles for CPF 2

IEC 661784-5-2:2018-08+AMD1:2024-03 CSV(en)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.

IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.

Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need

further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 61784-5-2 ®
Edition 4.1 2024-03
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 5-2: Installation of fieldbuses – Installation profiles for CPF 2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.40 ISBN 978-2-8322-8624-1
REDLINE VERSION – 2 – IEC 61784-5-2:2018+AMD1:2024 CSV
© IEC 2024
CONTENTS
FOREWORD . 10
INTRODUCTION . 12
INTRODUCTION to Amendment 1 . 14
1 Scope . 15
2 Normative references . 15
3 Terms, definitions and abbreviated terms . 15
4 CPF 2: Overview of installation profiles . 16
5 Installation profile conventions . 16
6 Conformance to installation profiles . 17
Annex A (normative) CP 2/1 (ControlNet™) specific installation profile . 18
A.1 Installation profile scope . 18
A.2 Normative references . 18
A.3 Installation profile terms, definitions, and abbreviated terms . 18
A.3.1 Terms and definitions . 18
A.3.2 Abbreviated terms . 18
A.3.3 Conventions for installation profiles . 18
A.4 Installation planning . 19
A.4.1 General . 19
A.4.2 Planning requirements . 20
A.4.3 Network capabilities. 21
A.4.4 Selection and use of cabling components . 27
A.4.5 Cabling planning documentation . 45
A.4.6 Verification of cabling planning specification . 45
A.5 Installation implementation . 45
A.5.1 General requirements . 45
A.5.2 Cable installation . 45
A.5.3 Connector installation . 47
A.5.4 Terminator installation . 56
A.5.5 Device installation . 56
A.5.6 Coding and labelling . 58
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 59
A.5.8 As-implemented cabling documentation . 60
A.6 Installation verification and installation acceptance test . 60
A.6.1 General . 60
A.6.2 Installation verification . 60
A.6.3 Installation acceptance test . 63
A.7 Installation administration . 65
A.8 Installation maintenance and installation troubleshooting . 65
A.8.1 General . 65
A.8.2 Maintenance . 65
A.8.3 Troubleshooting . 65
A.8.4 Specific requirements for maintenance and troubleshooting. 70
Annex B (normative) CP 2/2 (EtherNet/IP™) specific installation profile . 71
B.1 Installation profile scope . 71
B.2 Normative references . 71
B.3 Installation profile terms, definitions, and abbreviated terms . 72

© IEC 2024
B.3.1 Terms and definitions . 72
B.3.2 Abbreviated terms . 72
B.3.3 Conventions for installation profiles . 72
B.4 Installation planning . 72
B.4.1 General . 72
B.4.2 Planning requirements . 73
B.4.3 Network capabilities. 74
B.4.4 Selection and use of cabling components . 80
B.4.5 Cabling planning documentation . 97
B.4.6 Verification of cabling planning specification . 97
B.5 Installation implementation . 97
B.5.1 General requirements . 97
B.5.2 Cable installation . 97
B.5.3 Connector installation . 98
B.5.4 Terminator installation . 100
B.5.5 Device installation . 100
B.5.6 Coding and labelling . 100
B.5.7 Earthing and bonding of equipment and devices and shield cabling . 100
B.5.8 As-implemented cabling documentation . 102
B.6 Installation verification and installation acceptance test . 102
B.6.1 General . 102
B.6.2 Installation verification . 102
B.6.3 Installation acceptance test . 103
B.7 Installation administration . 104
B.8 Installation maintenance and installation troubleshooting . 105
Annex C (normative) CP 2/3 (DeviceNet™) specific installation profile . 106
C.1 Installation profile scope . 106
C.2 Normative references . 106
C.3 Installation profile terms, definitions, and abbreviated terms . 106
C.3.1 Terms and definitions . 106
C.3.2 Abbreviated terms . 106
C.3.3 Conventions for installation profiles . 106
C.4 Installation planning . 107
C.4.1 General . 107
C.4.2 Planning requirements . 108
C.4.3 Network capabilities. 109
C.4.4 Selection and use of cabling components . 125
C.4.5 Cabling planning documentation . 135
C.4.6 Verification of cabling planning specification . 135
C.5 Installation implementation . 135
C.5.1 General requirements . 135
C.5.2 Cable installation . 135
C.5.3 Connector installation . 137
C.5.4 Terminator installation . 150
C.5.5 Device installation . 152
C.5.6 Coding and labelling . 156
C.5.7 Earthing and bonding of equipment and devices and shield cabling . 156
C.5.8 As-implemented cabling documentation . 157
C.6 Installation verification and installation acceptance test . 157

REDLINE VERSION – 4 – IEC 61784-5-2:2018+AMD1:2024 CSV
© IEC 2024
C.6.1 General . 157
C.6.2 Installation verification . 157
C.6.3 Installation acceptance test .
...


IEC 61784-5-2 ®
Edition 4.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Profiles –
Part 5-2: Installation of fieldbuses – Installation profiles for CPF 2

Réseaux de communication industriels – Profils –
Partie 5-2: Installation des bus de terrain – Profils d’installation pour CPF 2

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 61784-5-2 ®
Edition 4.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Profiles –

Part 5-2: Installation of fieldbuses – Installation profiles for CPF 2

Réseaux de communication industriels – Profils –

Partie 5-2: Installation des bus de terrain – Profils d’installation pour CPF 2

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.40 ISBN 978-2-8322-1006-0

– 2 – IEC 61784-5-2:2018 © IEC 2018
CONTENTS
FOREWORD . 10
INTRODUCTION . 12
1 Scope . 13
2 Normative references . 13
3 Terms, definitions and abbreviated terms . 13
4 CPF 2: Overview of installation profiles . 13
5 Installation profile conventions . 14
6 Conformance to installation profiles . 15
Annex A (normative) CP 2/1 (ControlNet™) specific installation profile . 16
A.1 Installation profile scope . 16
A.2 Normative references . 16
A.3 Installation profile terms, definitions, and abbreviated terms . 16
A.3.1 Terms and definitions. 16
A.3.2 Abbreviated terms . 16
A.3.3 Conventions for installation profiles . 16
A.4 Installation planning . 17
A.4.1 General . 17
A.4.2 Planning requirements . 18
A.4.3 Network capabilities . 19
A.4.4 Selection and use of cabling components . 25
A.4.5 Cabling planning documentation . 43
A.4.6 Verification of cabling planning specification . 43
A.5 Installation implementation . 43
A.5.1 General requirements . 43
A.5.2 Cable installation . 43
A.5.3 Connector installation . 45
A.5.4 Terminator installation . 54
A.5.5 Device installation . 54
A.5.6 Coding and labelling . 56
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 57
A.5.8 As-implemented cabling documentation . 58
A.6 Installation verification and installation acceptance test . 58
A.6.1 General . 58
A.6.2 Installation verification . 58
A.6.3 Installation acceptance test . 61
A.7 Installation administration . 63
A.8 Installation maintenance and installation troubleshooting . 63
A.8.1 General . 63
A.8.2 Maintenance . 63
A.8.3 Troubleshooting . 63
A.8.4 Specific requirements for maintenance and troubleshooting . 68
Annex B (normative) CP 2/2 (EtherNet/IP™) specific installation profile . 69
B.1 Installation profile scope . 69

B.2 Normative references . 69
B.3 Installation profile terms, definitions, and abbreviated terms . 69
B.3.1 Terms and definitions. 69
B.3.2 Abbreviated terms . 69
B.3.3 Conventions for installation profiles . 70
B.4 Installation planning . 70
B.4.1 General . 70
B.4.2 Planning requirements . 71
B.4.3 Network capabilities . 71
B.4.4 Selection and use of cabling components . 76
B.4.5 Cabling planning documentation . 92
B.4.6 Verification of cabling planning specification . 92
B.5 Installation implementation . 92
B.5.1 General requirements . 92
B.5.2 Cable installation . 92
B.5.3 Connector installation . 93
B.5.4 Terminator installation . 94
B.5.5 Device installation . 94
B.5.6 Coding and labelling . 94
B.5.7 Earthing and bonding of equipment and devices and shield cabling . 94
B.5.8 As-implemented cabling documentation . 96
B.6 Installation verification and installation acceptance test . 96
B.6.1 General . 96
B.6.2 Installation verification . 96
B.6.3 Installation acceptance test . 98
B.7 Installation administration . 99
B.8 Installation maintenance and installation troubleshooting . 99
Annex C (normative) CP 2/3 (DeviceNet™) specific installa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.