IEC 61784-5-6:2024
(Main)Industrial networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
Industrial networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
IEC 61784-5-6:2024 specifies the installation profiles for CPF 6 (INTERBUSTM)[1]. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018, IEC 61918:2018/AMD1:2022 and IEC 61918:2018/AMD2:2024.
[1] INTERBUSTM is a trade name of INTERBUS Club, an independent organisation of users and vendors of INTERBUS products. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name INTERBUS. Use of the trade name INTERBUS requires permission of the trade name holder.
Réseaux industriels - Profils - Partie 5-6: Installation des bus de terrain - Profils d’installation pour CPF 6
L’IEC 61784-5-6:2024 spécifie les profils d’installation pour la CPF 6 (INTERBUS™)[1]. Les profils d’installation sont spécifiés dans les annexes. Ces annexes sont à lire conjointement avec l’IEC 61918:2018, l’IEC 61918:2018/AMD1:2022 et l’IEC 61918:2018/AMD2:2024.
[1] INTERBUS™ est une marque de INTERBUS Club, organisation indépendante d’utilisateurs et de fournisseurs de produits INTERBUS. Cette information est donnée à l’intention des utilisateurs du présent document et ne signifie nullement que l’IEC approuve l’emploi du produit ainsi désigné. La conformité à ce profil n’exige pas l’utilisation de la marque INTERBUS. L’utilisation de la marque INTERBUS exige l’autorisation de son détenteur.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61784-5-6 ®
Edition 5.0 2024-04
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 5-6: Installation of fieldbuses – Installation profiles for CPF
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.
IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.
Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 61784-5-6 ®
Edition 5.0 2024-04
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 5-6: Installation of fieldbuses – Installation profiles for CPF
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.40 ISBN 978-2-8322-8689-0
– 2 – IEC 61784-5-6:2024 RLV © IEC 2024
CONTENTS
FOREWORD . 5
INTRODUCTION . 2
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviated terms . 9
4 CPF 6: Overview of installation profiles . 10
5 Installation profile conventions. 10
6 Conformance to installation profiles . 10
Annex A (normative) CPF 6 Type 8 network specific installation profile . 12
A.1 Installation profile scope . 12
A.2 Normative references . 12
A.3 Installation profile terms, definitions, and abbreviated terms . 13
A.3.1 Terms and definitions . 13
A.3.2 Abbreviated terms . 14
A.3.3 Conventions for installation profiles . 14
A.4 Installation planning . 14
A.4.1 General . 14
A.4.2 Planning requirements . 15
A.4.3 Network capabilities . 16
A.4.4 Selection and use of cabling components . 20
A.4.5 Cabling planning documentation . 29
A.4.6 Verification of cabling planning specification . 29
A.5 Installation implementation. 29
A.5.1 General requirements . 29
A.5.2 Cable installation . 29
A.5.3 Connector installation . 32
A.5.4 Terminator installation . 34
A.5.5 Device installation . 34
A.5.6 Coding and labelling . 34
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 34
A.5.8 As-implemented cabling documentation . 34
A.6 Installation verification and installation acceptance test . 34
A.6.1 General . 34
A.6.2 Installation verification . 34
A.6.3 Installation acceptance test . 35
A.7 Installation administration . 36
A.8 Installation maintenance and installation troubleshooting . 36
Annex B (normative) CPF 6 Ethernet network specific installation profile . 37
B.1 Installation profile scope . 37
B.2 Normative references . 37
B.3 Installation profile terms, definitions, and abbreviated terms . 38
B.3.1 Terms and definitions . 38
B.3.2 Abbreviated terms . 38
B.3.3 Conventions for installation profiles . 38
B.4 Installation planning . 38
B.4.1 General . 38
B.4.2 Planning requirements . 39
B.4.3 Network capabilities . 40
B.4.4 Selection and use of cabling components . 43
B.4.5 Cabling planning documentation . 49
B.4.6 Verification of cabling planning specification . 49
B.5 Installation implementation. 49
B.5.1 General requirements . 49
B.5.2 Cable installation . 49
B.5.3 Connector installation . 51
B.5.4 Terminator installation . 51
B.5.5 Device installation . 51
B.5.6 Coding and labelling . 51
B.5.7 Earthing and bonding of equipment and devices and shield cabling . 51
B.5.8 As-implemented cabling documentation . 52
B.6 Installation verification and installation acceptance test . 52
B.6.1 General . 52
B.6.2 Installation verification . 52
B.6.3 Installation acceptance test . 52
B.7 Installation administration . 52
B.8 Installation maintenance and installation troubleshooting . 52
Bibliography . 53
Figure 1 – Standards relationships . 8
Figure A.1 – Type 8 network structure example . 17
Figure A.2 – Example of a Type 8 network configuration . 18
Figure A.3 – Sub-D connector pin assignment . 32
Figure A.4 – M23 circular connector pin assignment . 33
Figure A.5 – M12 circular connector pin assignment . 33
Figure A.6 – Terminal connector at the device . 33
Figure B.1 – Terminal connector at the device . 51
Table A.1 – Basic network characteristics for balanced cabling not based on Ethernet . 19
Table A.2 – Network characteristics for optical fibre cabling . 20
Table A.3 – Information relevant to balanced cable: fixed cables . 21
Table A.4 – Information relevant to balanced cable: cords . 22
Table A.5 – Remote bus fibre optic cable length . 24
Table A.6 – Connectors for copper cabling CPs not based on Ethernet . 24
Table A.7 – Optical fibre connecting hardware . 25
Table A.8 – Relationship between FOC and fibre types (Type 8 networks) . 25
Table A.9 – Colour code for balanced cables used by Type 8 networks . 27
Table A.10 – Parameters for balanced cables . 29
Table A.11 – Parameters for silica optical fibre cables . 30
Table A.12 – Parameters for POF optical fibre cables . 30
Table A.13 – Parameters for hard clad silica optical fibre cables . 31
Table A.14 – Pin assignment of the terminal connector . 33
Table B.1 – Network characteristics for balanced cabling based on Ethernet . 41
– 4 – IEC 61784-5-6:2024 RLV © IEC 2024
Table B.2 – Network characteristics for optical fibre cabling . 42
Table B.3 – Information relevant to copper cable: fixed cables . 43
Table B.4 – Information relevant to copper cable: cords . 44
Table B.5 – Information relevant to optical fibre cables . 45
Table B.6 – Connectors for balanced cabling CPs based on Ethernet . 46
Table B.7 – Connectors for copper cabling CPs not based on Ethernet . 46
Table B.8 – Optical fibre connecting hardware . 47
Table B.9 – Relationship between FOC and fibre types (CP 6/2 Ethernet network) . 47
Table B.10 – Parameters for balanced cables .
...
IEC 61784-5-6 ®
Edition 5.0 2024-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial networks – Profiles –
Part 5-6: Installation of fieldbuses – Installation profiles for CPF 6
Réseaux industriels – Profils –
Partie 5-6: Installation des bus de terrain – Profils d’installation pour CPF 6
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.
IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.
Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications, symboles
en utilisant différents critères (numéro de référence, texte, graphiques et le glossaire. Avec un abonnement, vous aurez
comité d’études, …). Elle donne aussi des informations sur les toujours accès à un contenu à jour adapté à vos besoins.
projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 500 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalents dans 25 langues
Disponible en ligne et une fois par mois par email.
additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 61784-5-6 ®
Edition 5.0 2024-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial networks – Profiles –
Part 5-6: Installation of fieldbuses – Installation profiles for CPF 6
Réseaux industriels – Profils –
Partie 5-6: Installation des bus de terrain – Profils d’installation pour CPF 6
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40, 35.100.40 ISBN 978-2-8322-8404-9
– 2 – IEC 61784-5-6:2024 © IEC 2024
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 8
4 CPF 6: Overview of installation profiles . 9
5 Installation profile conventions. 9
6 Conformance to installation profiles . 9
Annex A (normative) CPF 6 Type 8 network specific installation profile . 11
A.1 Installation profile scope . 11
A.2 Normative references . 11
A.3 Installation profile terms, definitions, and abbreviated terms . 11
A.3.1 Terms and definitions . 11
A.3.2 Abbreviated terms . 12
A.3.3 Conventions for installation profiles . 13
A.4 Installation planning . 13
A.4.1 General . 13
A.4.2 Planning requirements . 13
A.4.3 Network capabilities . 14
A.4.4 Selection and use of cabling components . 18
A.4.5 Cabling planning documentation . 27
A.4.6 Verification of cabling planning specification . 27
A.5 Installation implementation. 27
A.5.1 General requirements . 27
A.5.2 Cable installation . 27
A.5.3 Connector installation . 30
A.5.4 Terminator installation . 32
A.5.5 Device installation . 32
A.5.6 Coding and labelling . 32
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 32
A.5.8 As-implemented cabling documentation . 32
A.6 Installation verification and installation acceptance test . 32
A.6.1 General . 32
A.6.2 Installation verification . 32
A.6.3 Installation acceptance test . 33
A.7 Installation administration . 34
A.8 Installation maintenance and installation troubleshooting . 34
Annex B (normative) CPF 6 Ethernet network specific installation profile . 35
B.1 Installation profile scope . 35
B.2 Normative references . 35
B.3 Installation profile terms, definitions, and abbreviated terms . 36
B.3.1 Terms and definitions . 36
B.3.2 Abbreviated terms . 36
B.3.3 Conventions for installation profiles . 36
B.4 Installation planning . 36
B.4.1 General . 36
B.4.2 Planning requirements . 36
B.4.3 Network capabilities . 37
B.4.4 Selection and use of cabling components . 40
B.4.5 Cabling planning documentation . 46
B.4.6 Verification of cabling planning specification . 46
B.5 Installation implementation. 46
B.5.1 General requirements . 46
B.5.2 Cable installation . 46
B.5.3 Connector installation . 48
B.5.4 Terminator installation . 48
B.5.5 Device installation . 48
B.5.6 Coding and labelling . 48
B.5.7 Earthing and bonding of equipment and devices and shield cabling . 48
B.5.8 As-implemented cabling documentation . 48
B.6 Installation verification and installation acceptance test . 49
B.6.1 General . 49
B.6.2 Installation verification . 49
B.6.3 Installation acceptance test . 49
B.7 Installation administration . 49
B.8 Installation maintenance and installation troubleshooting . 49
Bibliography . 50
Figure 1 – Standards relationships . 7
Figure A.1 – Type 8 network structure example . 15
Figure A.2 – Example of a Type 8 network configuration . 16
Figure A.3 – Sub-D connector pin assignment . 30
Figure A.4 – M23 circular connector pin assignment . 31
Figure A.5 – M12 circular connector pin assignment . 31
Figure A.6 – Terminal connector at the device .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.