iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60068-3-7:2001

(Main)

Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)

Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)

Provides a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. This standard is destined primarily for users when conducting regular chamber performance monitoring.

Essais d'environnement - Partie 3-7: Documentation d'accompagnement et guide - Mesures dans les chambres d'essai en température pour les essais A et B (avec charge)

Fournit une méthode uniforme et reproductible pour confirmer que les chambres d'essai en température sont conformes aux exigences spécifiées dans les méthodes d'essais climatiques de la CEI 60068-2-1 et de la CEI 60068-2-2 quand elles sont chargées de spécimens dissipateurs d'énergie ou non, avec des conditions qui tiennent compte d'une circulation d'air à l'intérieur de l'espace de travail de la chambre. Cette norme est en premier lieu destinée à aider les utilisateurs lorsqu'ils réalisent des contrôles réguliers des performances de leur chambre d'essai.

General Information

Status
Published
Publication Date
26-Aug-2001
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
19.040 - Environmental testing
29.020 - Electrical engineering in general
Technical Committee
TC 104 - Environmental conditions, classification and methods of test
Drafting Committee
MT 16 - TC 104/MT 16
Current Stage
DELPUB - Deleted Publication
Start Date
07-Sep-2018
Completion Date
07-Jul-2020
Ref Project

Relations

Revised
IEC 60068-3-7:2020 - Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
Effective Date
05-Sep-2023

Buy Standard

IEC 60068-3-7:2001 - Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)IEC 60068-3-7:2001 - Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)
PreviousNext
Standard
IEC 60068-3-7:2001 - Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)
English and French language
19 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


1250( &(,
,17(51$7,21$/( ,(&

,17(51$7,21$/
3UHPLqUHpGLWLRQ
67$1'$5'
)LUVWHGLWLRQ

(VVDLVG
HQYLURQQHPHQW±
3DUWLH
'RFXPHQWDWLRQG¶DFFRPSDJQHPHQWHWJXLGH±
0HVXUHVGDQVOHVFKDPEUHVG¶HVVDL
HQWHPSpUDWXUHSRXUOHVHVVDLV$HW%
DYHFFKDUJH
(QYLURQPHQWDOWHVWLQJ±
3DUW
6XSSRUWLQJGRFXPHQWDWLRQDQGJXLGDQFH±
0HDVXUHPHQWVLQWHPSHUDWXUHFKDPEHUV
IRUWHVWV$DQG% ZLWKORDG
1XPpURGHUpIpUHQFH
5HIHUHQFHQXPEHU
&(,,(&
1XPpURWDWLRQGHVSXEOLFDWLRQV 3XEOLFDWLRQQXPEHULQJ
'HSXLVOHHUMDQYLHUOHVSXEOLFDWLRQVGHOD&(, $V IURP  -DQXDU\  DOO ,(& SXEOLFDWLRQV DUH
VRQWQXPpURWpHVjSDUWLUGH$LQVLOD&(, LVVXHG ZLWK D GHVLJQDWLRQ LQ WKH  VHULHV )RU
GHYLHQWOD&(, H[DPSOH,(&LVQRZUHIHUUHGWRDV,(&
(GLWLRQVFRQVROLGpHV &RQVROLGDWHGHGLWLRQV
/HVYHUVLRQVFRQVROLGpHVGHFHUWDLQHVSXEOLFDWLRQVGHOD 7KH,(&LVQRZSXEOLVKLQJFRQVROLGDWHGYHUVLRQVRILWV
&(,LQFRUSRUDQWOHVDPHQGHPHQWVVRQWGLVSRQLEOHV3DU SXEOLFDWLRQV )RU H[DPSOH HGLWLRQ QXPEHUV  
H[HPSOHOHVQXPpURVG¶pGLWLRQHWLQGLTXHQW DQG UHIHU UHVSHFWLYHO\ WR WKH EDVH SXEOLFDWLRQ
UHVSHFWLYHPHQWODSXEOLFDWLRQGHEDVHODSXEOLFDWLRQGH WKHEDVHSXEOLFDWLRQLQFRUSRUDWLQJDPHQGPHQWDQG
EDVHLQFRUSRUDQWO¶DPHQGHPHQWHWODSXEOLFDWLRQGH WKH EDVH SXEOLFDWLRQ LQFRUSRUDWLQJ DPHQGPHQWV 
EDVHLQFRUSRUDQWOHVDPHQGHPHQWVHW DQG
,QIRUPDWLRQVVXSSOpPHQWDLUHV )XUWKHULQIRUPDWLRQRQ,(&SXEOLFDWLRQV
VXUOHVSXEOLFDWLRQVGHOD&(,
/HFRQWHQXWHFKQLTXHGHVSXEOLFDWLRQVGHOD&(,HVW 7KH WHFKQLFDO FRQWHQW RI ,(& SXEOLFDWLRQV LV NHSW
FRQVWDPPHQWUHYXSDUOD &(, DILQ TX
LO UHIOqWH O
pWDW XQGHUFRQVWDQWUHYLHZE\WKH,(&WKXVHQVXULQJWKDW
DFWXHOGHODWHFKQLTXH'HVUHQVHLJQHPHQWVUHODWLIVj WKH FRQWHQW UHIOHFWV FXUUHQW WHFKQRORJ\ ,QIRUPDWLRQ
FHWWH SXEOLFDWLRQ \ FRPSULV VD YDOLGLWp VRQW GLVSR UHODWLQJ WR WKLV SXEOLFDWLRQ LQFOXGLQJ LWV YDOLGLW\ LV
QLEOHVGDQVOH&DWDORJXHGHVSXEOLFDWLRQVGHOD&(, DYDLODEOH LQ WKH ,(& &DWDORJXH RI SXEOLFDWLRQV
YRLU FLGHVVRXV  HQ SOXV GHV QRXYHOOHV pGLWLRQV VHHEHORZ LQDGGLWLRQWRQHZHGLWLRQVDPHQGPHQWV
DPHQGHPHQWVHWFRUULJHQGD'HVLQIRUPDWLRQVVXUOHV DQGFRUULJHQGD ,QIRUPDWLRQ RQ WKH VXEMHFWV XQGHU
VXMHWVjO¶pWXGHHWO¶DYDQFHPHQWGHVWUDYDX[HQWUHSULV FRQVLGHUDWLRQDQGZRUNLQSURJUHVVXQGHUWDNHQE\WKH
SDUOHFRPLWpG¶pWXGHVTXLDpODERUpFHWWHSXEOLFDWLRQ WHFKQLFDO FRPPLWWHH ZKLFK KDV SUHSDUHG WKLV
DLQVL TXH OD OLVWH GHV SXEOLFDWLRQV SDUXHV VRQW SXEOLFDWLRQDVZHOODVWKHOLVWRISXEOLFDWLRQVLVVXHG
pJDOHPHQWGLVSRQLEOHVSDUO¶LQWHUPpGLDLUHGH LVDOVRDYDLODEOHIURPWKHIROORZLQJ
• 6LWHZHEGHOD&(, ZZZLHFFK • ,(&:HE6LWH ZZZLHFFK
• &DWDORJXHGHVSXEOLFDWLRQVGHOD&(, • &DWDORJXHRI,(&SXEOLFDWLRQV
/HFDWDORJXHHQOLJQHVXUOHVLWHZHEGHOD&(, 7KH RQOLQH FDWDORJXH RQ WKH ,(& ZHE VLWH
ZZZLHFFKFDWOJIKWP YRXVSHUPHWGHIDLUHGHV ZZZLHFFKFDWOJHKWP  HQDEOHV \RX WR VHDUFK
UHFKHUFKHV HQ XWLOLVDQW GH QRPEUHX[ FULWqUHV E\ D YDULHW\ RI FULWHULD LQFOXGLQJ WH[W VHDUFKHV
FRPSUHQDQWGHVUHFKHUFKHVWH[WXHOOHVSDUFRPLWp WHFKQLFDOFRPPLWWHHVDQGGDWHRISXEOLFDWLRQ2Q
G¶pWXGHVRXGDWHGHSXEOLFDWLRQ'HVLQIRUPDWLRQV OLQH LQIRUPDWLRQ LV DOVR DYDLODEOH RQ UHFHQWO\
HQ OLJQH VRQW pJDOHPHQW GLVSRQLEOHV VXU OHV LVVXHG SXEOLFDWLRQV ZLWKGUDZQ DQG UHSODFHG
QRXYHOOHV SXEOLFDWLRQV OHV SXEOLFDWLRQV UHPSOD SXEOLFDWLRQVDVZHOODVFRUULJHQGD
FpHVRXUHWLUpHVDLQVLTXHVXUOHVFRUULJHQGD
• ,(&-XVW3XEOLVKHG
• ,(&-XVW3XEOLVKHG
&H UpVXPp GHV GHUQLqUHV SXEOLFDWLRQV SDUXHV
7KLV VXPPDU\ RI UHFHQWO\ LVVXHG SXEOLFDWLRQV
ZZZLHFFK-3KWP  HVW DXVVL GLVSRQLEOH SDU
ZZZLHFFK-3KWP  LV DOVR DYDLODEOH E\ HPDLO
FRXUULHU pOHFWURQLTXH 9HXLOOH] SUHQGUH FRQWDFW
3OHDVHFRQWDFWWKH&XVWRPHU6HUYLFH&HQWUH VHH
DYHFOH6HUYLFHFOLHQW YRLUFLGHVVRXV SRXUSOXV
EHORZ IRUIXUWKHULQIRUPDWLRQ
G¶LQIRUPDWLRQV
• 6HUYLFHFOLHQWV
• &XVWRPHU6HUYLFH&HQWUH
6L YRXV DYH] GHV TXHVWLRQV DX VXMHW GH FHWWH
,I \RX KDYH DQ\ TXHVWLRQV UHJDUGLQJ WKLV
SXEOLFDWLRQ RX DYH] EHVRLQ GH UHQVHLJQHPHQWV
SXEOLFDWLRQ RU QHHG IXUWKHU DVVLVWDQFH SOHDVH
VXSSOpPHQWDLUHVSUHQH]FRQWDFWDYHFOH6HUYLFH
FRQWDFWWKH&XVWRPHU6HUYLFH&HQWUH
FOLHQWV
(PDLOFXVWVHUY#LHFFK
(PDLO FXVWVHUY#LHFFK
7pO 
7HO 
)D[ 
)D[ 

1250( &(,
,17(51$7,21$/( ,(&

,17(51$7,21$/
3UHPLqUHpGLWLRQ
67$1'$5'
)LUVWHGLWLRQ

(VVDLVG
HQYLURQQHPHQW±
3DUWLH
'RFXPHQWDWLRQG¶DFFRPSDJQHPHQWHWJXLGH±
0HVXUHVGDQVOHVFKDPEUHVG¶HVVDL
HQWHPSpUDWXUHSRXUOHVHVVDLV$HW%
DYHFFKDUJH
(QYLURQPHQWDOWHVWLQJ±
3DUW
6XSSRUWLQJGRFXPHQWDWLRQDQGJXLGDQFH±
0HDVXUHPHQWVLQWHPSHUDWXUHFKDPEHUV
IRUWHVWV$DQG% ZLWKORDG
©,(&'URLWVGHUHSURGXFWLRQUpVHUYpV⎯&RS\ULJKWDOOULJKWVUHVHUYHG
$XFXQHSDUWLHGHFHWWHSXEOLFDWLRQQHSHXWrWUHUHSURGXLWHQL 1RSDUWRIWKLVSXEOLFDWLRQPD\EHUHSURGXFHGRUXWLOL]HGLQ
XWLOLVpHVRXVTXHOTXHIRUPHTXHFHVRLWHWSDUDXFXQSURFpGp DQ\ IRUP RU E\ DQ\ PHDQV HOHFWURQLF RU PHFKDQLFDO
pOHFWURQLTXHRXPpFDQLTXH\FRPSULVODSKRWRFRSLHHWOHV LQFOXGLQJSKRWRFRS\LQJDQGPLFURILOPZLWKRXWSHUPLVVLRQLQ
PLFURILOPVVDQVO
DFFRUGpFULWGHO
pGLWHXU ZULWLQJIURPWKHSXEOLVKHU
,QWHUQDWLRQDO(OHFWURWHFKQLFDO&RPPLVVLRQ UXHGH9DUHPEp*HQHYD6ZLW]HUODQG
7HOHID[ HPDLOLQPDLO#LHFFK ,(&ZHEVLWHKWWSZZZLHFFK
&2'(35,;
&RPPLVVLRQ (OHFWURWHFKQLTXH ,QWHUQDWLRQDOH
.
35,&(&2'(
,QWHUQDWLRQDO (OHFWURWHFKQLFDO &RPPLVVLRQ
3RXUSUL[YRLUFDWDORJXHHQYLJXHXU
)RUSULFHVHHFXUUHQWFDWDORJXH

±± ‹&(,
6200$,5(
$9$17352326
,1752'8&7,21
 'RPDLQHG¶DSSOLFDWLRQ
 5pIpUHQFHVQRUPDWLYHV
 'pILQLWLRQV
 6\VWqPHGHPHVXUH
 7HPSpUDWXUH
 +XPLGLWp
 3RXYRLUpPLVVLIGHVSDURLV
 9LWHVVHGHO¶DLU
 0R\HQG¶HQUHJLVWUHPHQW
 'pWHUPLQDWLRQGHVSHUIRUPDQFHVHQWHPSpUDWXUH
 (QYLURQQHPHQWGHOD]RQHG¶HVVDL
 &KDUJHPHQWGHODFKDPEUHG
HVVDL
 0LVHHQSODFHGHVFDSWHXUVGHWHPSpUDWXUH
 0pWKRGHVG¶HVVDL
 0pWKRGHVSRXUODFRQILUPDWLRQ
 0pWKRGHVGHFRQWU{OHGHURXWLQH
 &ULWqUHG¶pYDOXDWLRQ
 5HQVHLJQHPHQWVjGRQQHUGDQVOHUDSSRUWG¶HVVDLGHSHUIRUPDQFHV
)LJXUH±([HPSOHVGHFKDUJHVDUWLILFLHOOHV
)LJXUH±(PSODFHPHQWGHVFDSWHXUVVLWXpVVXUOHVSDURLV
7DEOHDX±&RQGLWLRQVG¶HVVDL
7DEOHDX±&KDUJHDUWLILFLHOOH±9DOHXUV

‹,(& ±±
&217(176
)25(:25'
,1752'8&7,21
 6FRSH
 1RUPDWLYHUHIHUHQFHV
 'HILQLWLRQV
 0HDVXULQJV\VWHP
 7HPSHUDWXUH
 +XPLGLW\
 :DOOHPLVVLYLW\
 $LUYHORFLW\
 5HFRUGLQJGHYLFH
 'HWHUPLQDWLRQRIWHPSHUDWXUHSHUIRUPDQFHV
 7HVWDUHDHQYLURQPHQW
 &KDPEHUORDGLQJ
 ,QVWDOODWLRQRIWHPSHUDWXUHVHQVRUV
 7HVWSURFHGXUHV
 &RQILUPDWLRQPHWKRGV
 5RXWLQHPRQLWRULQJPHWKRGV
 (YDOXDWLRQFULWHULD
 ,QIRUPDWLRQWREHJLYHQLQWKHSHUIRUPDQFHUHSRUW
)LJXUH±([DPSOHVRIDUWLILFLDOORDGV
)LJXUH±/RFDWLRQRIZDOOVHQVRUV 
7DEOH±7HVWFRQGLWLRQV
7DEOH±$UWLILFLDOORDG9DOXHV

±± ‹&(,
&200,66,21e/(&7527(&+1,48(,17(51$7,21$/(
BBBBBBBBBBBB
(66$,6'¶(19,5211(0(17±
3DUWLH'RFXPHQWDWLRQG¶DFFRPSDJQHPHQWHWJXLGH±
0HVXUHVGDQVOHVFKDPEUHVG¶HVVDLHQWHPSpUDWXUH
SRXUOHVHVVDLV$HW% DYHFFKDUJH
$9$17352326
 /D&(, &RPPLVVLRQ(OHFWURWHFKQLTXH,QWHUQDWLRQDOH HVWXQHRUJDQLVDWLRQPRQGLDOHGHQRUPDOLVDWLRQFRPSRVpH
GHO
HQVHPEOHGHVFRPLWpVpOHFWURWHFKQLTXHVQDWLRQDX[ &RPLWpVQDWLRQDX[GHOD&(, /D&(,DSRXUREMHWGH
IDYRULVHU OD FRRSpUDWLRQ LQWHUQDWLRQDOH SRXU WRXWHV OHV TXHVWLRQV GH QRUPDOLVDWLRQ GDQV OHV GRPDLQHV GH
O
pOHFWULFLWpHWGHO
pOHFWURQLTXH$FHWHIIHWOD&(,HQWUHDXWUHVDFWLYLWpVSXEOLHGHV1RUPHVLQWHUQDWLRQDOHV
/HXUpODERUDWLRQHVWFRQILpHjGHVFRPLWpVG
pWXGHVDX[WUDYDX[GHVTXHOVWRXW&RPLWpQDWLRQDOLQWpUHVVpSDUOH
VXMHWWUDLWpSHXWSDUWLFLSHU/HVRUJDQLVDWLRQVLQWHUQDWLRQDOHVJRXYHUQHPHQWDOHVHWQRQJRXYHUQHPHQWDOHVHQ
OLDLVRQ DYHF OD &(, SDUWLFLSHQW pJDOHPHQW DX[ WUDYDX[ /D &(, FROODERUH pWURLWHPHQW DYHF O
2UJDQLVDWLRQ
,QWHUQDWLRQDOHGH1RUPDOLVDWLRQ ,62 VHORQGHVFRQGLWLRQVIL[pHVSDUDFFRUGHQWUHOHVGHX[RUJDQLVDWLRQV
 /HVGpFLVLRQVRXDFFRUGVRIILFLHOVGHOD&(,FRQFHUQDQWOHVTXHVWLRQVWHFKQLTXHVUHSUpVHQWHQWGDQVODPHVXUH
GXSRVVLEOHXQDFFRUGLQWHUQDWLRQDOVXUOHVVXMHWVpWXGLpVpWDQWGRQQpTXHOHV&RPLWpVQDWLRQDX[LQWpUHVVpV
VRQWUHSUpVHQWpVGDQVFKDTXHFRPLWpG¶pWXGHV
 /HVGRFXPHQWVSURGXLWVVHSUpVHQWHQWVRXVODIRUPHGHUHFRPPDQGDWLRQVLQWHUQDWLRQDOHV,OVVRQWSXEOLpV
FRPPHQRUPHVVSpFLILFDWLRQVWHFKQLTXHVUDSSRUWVWHFKQLTXHVRXJXLGHVHWDJUppVFRPPHWHOVSDUOHV&RPLWpV
QDWLRQDX[
 'DQVOHEXWG
HQFRXUDJHUO
XQLILFDWLRQLQWHUQDWLRQDOHOHV&RPLWpVQDWLRQDX[GHOD&(,V
HQJDJHQWjDSSOLTXHUGH
IDoRQWUDQVSDUHQWHGDQVWRXWHODPHVXUHSRVVLEOHOHV1RUPHVLQWHUQDWLRQDOHVGHOD&(,GDQVOHXUVQRUPHV
QDWLRQDOHV HW UpJLRQDOHV 7RXWH GLYHUJHQFH HQWUH OD QRUPH GH OD &(, HW OD QRUPH QDWLRQDOH RX UpJLRQDOH
FRUUHVSRQGDQWHGRLWrWUHLQGLTXpHHQWHUPHVFODLUVGDQVFHWWHGHUQLqUH
 /D&(,Q¶DIL[pDXFXQHSURFpGXUHFRQFHUQDQWOHPDUTXDJHFRPPHLQGLFDWLRQG¶DSSUREDWLRQHWVDUHVSRQVDELOLWp
Q¶HVWSDVHQJDJpHTXDQGXQPDWpULHOHVWGpFODUpFRQIRUPHjO¶XQHGHVHVQRUPHV
 /¶DWWHQWLRQHVWDWWLUpHVXUOHIDLWTXHFHUWDLQVGHVpOpPHQWVGHODSUpVHQWH1RUPHLQWHUQDWLRQDOHSHXYHQWIDLUH
O¶REMHW GH GURLWV GH SURSULpWp LQWHOOHFWXHOOH RX GH GURLWV DQDORJXHV /D &(, QH VDXUDLW rWUH WHQXH SRXU
UHVSRQVDEOHGHQHSDVDYRLULGHQWLILpGHWHOVGURLWVGHSURSULpWpHWGHQHSDVDYRLUVLJQDOpOHXUH[LVWHQFH
/D1RUPHLQWHUQDWLRQDOH&(,DpWppWDEOLHSDUOHFRPLWpG
pWXGHVGHOD&(,
&RQGLWLRQVFODVVLILFDWLRQHWHVVDLVG¶HQYLURQQHPHQW
/HWH[WHGHFHWWHQRUPHHVWLVVXGHVGRFXPHQWVVXLYDQWV
)',6 5DSSRUWGHYRWH
)',6 59'
/HUDSSRUWGHYRWHLQGLTXpGDQVOHWDEOHDXFLGHVVXV
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60068-3-7:2020(Main)
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)

IEC 60068-3-7:2020 is available as IEC 60068-3-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-7:2020 specifies a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in the climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. This document is intended primarily for users when conducting regular chamber performance monitoring. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- verbal forms have, in many parts, been changed to express requirements instead of recommendations ('shall' instead of 'should');
- Table 1 has been updated.

  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-55:2013(Main)
Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce

IEC 60068-2-55:2013 provides a standard procedure for determining the ability of a specimen to withstand specified severities of bounce, e. g. when transported as loose cargo on wheeled vehicles. This second edition cancels and replaces the first edition, published in 1987, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: This new edition allows for loose cargo testing in a more general sense. The test is no longer aligned with a special testing machine but allows for use of any suitable equipment such as electrodynamic or servo-hydraulic shaker tables. Moreover, sinusoidal and random vibration can be used. The previous rotation table motions are included in Annex A as historical methods.
This publication is to be read in conjunction with IEC 60068-1:1988.

  • Standard
    38 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-65:2013(Main)
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method

IEC 60068-2-65:2013 provides standard procedures and guidance for conducting acoustic tests in order to determine the ability of a specimen to withstand vibration caused by a specified sound-pressure level environment to which it is, or is liable to be, subjected. This second edition cancels and replaces the second edition, published in 1993, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- minor technical and editorial changes were made throughout the document as originally requested by the DE National Committee;
- following comments at the CD stage, particularly from the UK National Committee, significant technical and editorial additions were made to the standard for acoustic testing employing the progressive wave tube technique.

  • Standard
    61 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-78:2012(Main)
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

IEC 60068-2-78:2012 is available as IEC Standards+ 60068-2-78:2012 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-2-78:2012 establishes a test method for determining the ability of components or equipment to withstand transportation, storage and use under conditions of high humidity. The object of this standard is to investigate the effect of high humidity at constant temperature without condensation on a specimen over a prescribed period. It is applicable to small equipment or components as well as large equipment, and can be applied to both heat-dissipating and non-heat-dissipating specimens. This second edition cancels and replaced the first edition, published in 2001 and constitutes a technical revision. This edition includes editorial and format changes with respect to the previous edition:
- The test chamber from IEC 60068-3-6 has been introduced.

  • Standard
    17 pages
    English and French language
    sale 15% off
  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-80:2005(Main)
Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode

IEC 60068-2-80:2005 Intended for general application for testing specimens when simulation is required of vibration excitation of a complex and mixed nature. The purpose of the test is to demonstrate the adequacy of the specimen to resist the specified mixed mode excitation without unacceptable degradation of its functional and/or structural performance. It is particularly useful for tailoring mixed mode environments where measured data are available for the real life environment. The test also helps reveal the accumulated effects of stress induced by random vibration, mixed with sine and/or random, and the resulting mechanical weakness and degradation in specified performances, and to use this information, in conjunction with the relevant specification, to assess the acceptability of specimens. In some cases, this standard may also be used to demonstrate the mechanical robustness of specimens. This standard is applicable to specimens which may be subjected to vibration of a random and/or a combination of random and deterministic nature resulting from transportation or real life environments, for example in aircraft, space vehicles and for items in their transportation container when the latter may be considered as part of the specimen itself. Although primarily intended for electrotechnical specimens, this standard is not restricted to such specimens and may be used in other fields where desired.

  • Standard
    83 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-8:2003(Main)
Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests

Provides guidance for selecting amongst the IEC 60068-2 stationary vibration test methods Fc sinusoidal, Fh random and F(x) Mixed mode vibration. The different steady-state test methods and their aims are briefly described in Clause 4. Transient test methods are not included. For vibration testing, the environmental conditions, especially the dynamic conditions for the specimen, should be known. This standard helps to collect information about the environmental conditions (Clause 5), to estimate or measure the dynamic conditions (Clause 6) and gives examples to enable decisions to be made on the most applicable environmental vibration test method. Starting from the condition, the method of selecting the appropriate test is given. Since real life vibration conditions are dominated by vibration of a random nature, random testing should be the commonly used method, see Table 1, Clause 7. The methods included hereafter may be used to examine the vibration response of a specimen under test before, during and after vibration testing. The selection for the appropriate excitation method is described in Clause 8 and tabulated in Table 2. In this standard specification, writers will find information concerning vibration test methods and guidance for their selection. For guidance on test parameters, or severities of one of the test methods, reference should be made to the normative references.

  • Standard
    45 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-4:2001(Main)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests

IEC 60068-3-4:2001 Provides the necessary information to assist in preparing relevant specifications, such as standards for components or equipment, in order to select appropriate tests and test severities for specific products and, in some cases, specific types of application. The object of damp heat tests is to determine the ability of products to withstand the stresses occurring in a high relative humidity environment, with or without condensation, and with special regard to variations of electrical and mechanical characteristics. Damp heat tests may also be utilized to check the resistance of a specimen to some forms of corrosion attack.

  • Standard
    31 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-7:2020(Main)
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)

IEC 60068-3-7:2020 is available as IEC 60068-3-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-7:2020 specifies a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in the climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. This document is intended primarily for users when conducting regular chamber performance monitoring. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- verbal forms have, in many parts, been changed to express requirements instead of recommendations ('shall' instead of 'should');
- Table 1 has been updated.

  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC 61340-5-1:2016(Main)
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements

IEC 61340-5-1:2016 is available as IEC 61340-5-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61340-5-1:2016 applies to activities that: manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 V HBM, 200 V CDM and 35 V for isolated conductors. ESDS with lower withstand voltages may require additional control elements or adjusted limits. Processes designed to handle items that have lower ESD withstand voltage(s) can still claim compliance to this standard. This standard provides the requirements for an ESD control program. IEC TR 61340-5-2 [9] provides guidance on the implementation of this standard. This standard does not apply to electrically initiated explosive devices, flammable liquids, gases and powders. The purpose of this standard is to provide the administrative and technical requirements for establishing, implementing and maintaining an ESD control program (hereinafter referred to as the "program"). This edition includes the following significant technical changes with respect to the previous edition:
a) Technical requirements were changed to align IEC 61340-5-1 with other industry ESD standards;
b) Reference documents were updated to reflect newly released IEC standards;
c) A section on product qualification was added;
d) Table 4 was deleted and detailed packaging requirements were deferred to IEC 61340-5-3;
e) Clause A.1 was removed and is now included in IEC 61340-4-6.
The contents of the corrigendum of May 2017 have been included in this copy.

  • Standard
    63 pages
    English language
    sale 15% off
  • Standard
    40 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-55:2013(Main)
Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce

IEC 60068-2-55:2013 provides a standard procedure for determining the ability of a specimen to withstand specified severities of bounce, e. g. when transported as loose cargo on wheeled vehicles. This second edition cancels and replaces the first edition, published in 1987, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: This new edition allows for loose cargo testing in a more general sense. The test is no longer aligned with a special testing machine but allows for use of any suitable equipment such as electrodynamic or servo-hydraulic shaker tables. Moreover, sinusoidal and random vibration can be used. The previous rotation table motions are included in Annex A as historical methods.
This publication is to be read in conjunction with IEC 60068-1:1988.

  • Standard
    38 pages
    English and French language
    sale 15% off