Corrigendum 1 - Amendment 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

Corrigendum 1 - Amendement 1 - Essais d'environnement - Partie 2-75: Essais - Tests Eh: Essais au marteau

General Information

Status: Published
Publication Date: 04-Dec-2025

ICS: 19.040 - Environmental testing

Technical Committee: TC 104 - Environmental conditions, classification and methods of test
Drafting Committee: MT 17 - TC 104/MT 17

Current Stage: PPUB - Publication issued
Start Date: 05-Dec-2025
Completion Date: 28-Jan-2026

Relations

Corrects: IEC 60068-2-75:2014/AMD1:2025 - Amendment 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
Effective Date: 21-Nov-2025

Buy Documents

IEC 60068-2-75:2014/AMD1:2025/COR1:2025 - Corrigendum 1 - Amendment 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
Released:12/5/2025 - Page 1 preview

Standard

IEC 60068-2-75:2014/AMD1:2025/COR1:2025 - Corrigendum 1 - Amendment 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests Released:12/5/2025

English and French language (1 pages)

sale 15% off

Preview

sale 15% off

Preview

Get Certified

Connect with accredited certification bodies for this standard

IMP NDT d.o.o.

Non-destructive testing services. Radiography, ultrasonic, magnetic particle, penetrant, visual inspection.

SA Slovenia Verified

Visit Website

Inštitut za kovinske materiale in tehnologije

Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.

SA Slovenia Verified

Visit Website

Q Techna d.o.o.

NDT and quality assurance specialist. 30+ years experience. NDT personnel certification per ISO 9712, nuclear and thermal power plant inspections, QA/

SA Slovenia Verified

Visit Website

Frequently Asked Questions

What is IEC 60068-2-75:2014/AMD1:2025/COR1:2025?

IEC 60068-2-75:2014/AMD1:2025/COR1:2025 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Corrigendum 1 - Amendment 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests". This standard covers: Corrigendum 1 - Amendment 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

What is the scope of IEC 60068-2-75:2014/AMD1:2025/COR1:2025?

Corrigendum 1 - Amendment 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

What ICS categories does IEC 60068-2-75:2014/AMD1:2025/COR1:2025 belong to?

IEC 60068-2-75:2014/AMD1:2025/COR1:2025 is classified under the following ICS (International Classification for Standards) categories: 19.040 - Environmental testing. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to IEC 60068-2-75:2014/AMD1:2025/COR1:2025?

IEC 60068-2-75:2014/AMD1:2025/COR1:2025 has the following relationships with other standards: It is inter standard links to IEC 60068-2-75:2014/AMD1:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

How can I access IEC 60068-2-75:2014/AMD1:2025/COR1:2025?

IEC 60068-2-75:2014/AMD1:2025/COR1:2025 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)

IEC 60068-2-75:2014/AMD1:2025/...

INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 60068-2-75 IEC 60068-2-75
Amendment 1 to edition 2.0 2014-09 Amendement 1 à l'édition 2.0 2014-09

Environmental testing - Essais d'environnement -
Part 2-75: Tests - Test Eh: Hammer tests Partie 2-75: Essais - Test Eh:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

IEC

IEC 60721-3-5:2026(Main)

Classification of environmental conditions - Part 3-5: Classification of groups of environmental parameters and their severities - Ground vehicle installations

IEC 60721-3-5:2026 classifies the groups of environmental parameters and their severities to which a product, not forming part of the vehicle, is subjected when installed on or in a ground vehicle. Such products are for example radios, communication systems, fare meters, flow meters for liquids transported by the vehicle, for example milk, petroleum products, etc. Vehicles where products can be permanently or temporarily installed include
- road vehicles: passenger cars, commercial vehicles, special vehicles, towing vehicles, trailers, mopeds, motorcycles,
- rail vehicles: trains, trams,
- tracked vehicles: excavators, cranes, rubber tracked vehicles,
- overland vehicles: four-wheel drive cars, tractors, snow scooters,
- handling and storage vehicles: fork-lift trucks (manual and robot), luggage transporters, and
- self-propelled machinery: diggers, harvesters.
This third edition cancels and replaces the second edition, published in 1997. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) most classes have been replaced by completely new classes based on the use of additional information obtained from referenced Technical Reports;
b) Table 1 through to Table 7 have been reviewed and updated;
c) the content of Annex A and Annex B has either been incorporated into the main body of the document or deleted.

Standard
16 pages
English language
sale 15% off
Standard
18 pages
French language
sale 15% off
Standard
34 pages
English and French language
sale 15% off

13-Jan-2026
19.040
TC 104

IEC

IEC 60068-2-75:2014/AMD1:2025(Amendment)

Amendment 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

The content of the corrigendum 1 of amendment 1 (2025-12) applies only to the French version.

Standard
2 pages
English language
sale 15% off
Standard
2 pages
French language
sale 15% off
Standard
4 pages
English and French language
sale 15% off

20-Oct-2025
19.040
TC 104

IEC

IEC 60068-2-1:2025(Main)

Environmental testing - Part 2-1: Tests - Test A: Cold

IEC 60068-2-1:2025 specifies temperature tests at low temperatures, generally referred to as "cold tests", that are applicable to non-heat-dissipating and heat-dissipating specimens, to determine the ability of components, equipment, or other articles to be used, transported or stored at low temperature.
This document is applicable to energized as well as non-energized specimens that normally achieve temperature stability during the test. The specimens can be subject to test in packed condition (to simulate transportation and storage) or in unpacked condition (to simulate use).
This document does not specify tests to determine the impact of temperature changes on specimens.
This seventh edition cancels and replaces the sixth edition published in 2007. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) revision of the introduction and scope;
b) inclusion of new figures and symbols for clarification purposes;
c) clarification of the test procedure for ascertaining high or low air velocity in the test chamber;
d) clarification of the requirements for measuring points around, on or in specimens;
e) reintroduction of the nomogram procedure for the correction of the conditioning temperature when testing with high air velocity (Test Ad and Test Ae);
f) revision of the temperature tolerances of the test;
g) revision of standardized requirements for the relevant specification and test report;
h) inclusion of the advantages and disadvantages of the testing procedures.

Standard
29 pages
English language
sale 15% off
Standard
31 pages
French language
sale 15% off
Standard
60 pages
English and French language
sale 15% off

22-Sep-2025
19.040
TC 104

IEC

IEC 60068-2-2:2025(Main)

Environmental testing - Part 2-2: Tests - Test B: Dry heat

IEC 60068-2-2:2025 specifies dry heat temperature tests that are applicable to non-heat-dissipating and heat-dissipating specimens, to determine the ability of components, equipment or other articles to be used, transported or stored at high temperature.
This document is applicable to energized as well as non-energized specimens that normally achieve temperature stability during the test. The specimens can be subject to test in packed condition (to simulate transportation and storage) or in unpacked condition (to simulate use).
This document does not specify tests to determine the impact of temperature changes on specimens.
This sixth edition cancels and replaces the fifth edition published in 2007. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) revision of the introduction and scope;
b) inclusion of new figures and symbols for clarification purposes;
c) clarification of the test procedure for ascertaining high or low air velocity in the test chamber;
d) clarification of the requirements for measuring points around, on or in specimens;
e) reintroduction of the nomogram procedure for the correction of the conditioning temperature when testing with high air velocity (Test Bd and Test Be);
f) revision of the temperature tolerances of the test;
g) revision of standardized requirements for the relevant specification and test report;
h) inclusion of the advantages and disadvantages of the testing procedures.

Standard
29 pages
English language
sale 15% off
Standard
32 pages
French language
sale 15% off
Standard
61 pages
English and French language
sale 15% off

22-Sep-2025
19.040
TC 104

IEC

IEC 60068-2-30:2025(Main)

Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

IEC 60068-2-30:2025 specifies a test procedure to determine the suitability of components, equipment, or other articles for use, transportation, and storage under conditions of high humidity combined with cyclic temperature changes and, in general, producing condensation on the surface of the specimen. This test method can also be used to validate the packaging of specimen for transportation and storage.
This fourth edition cancels and replaces the third edition published in 2005. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) revision of the requirements for the test chamber;
b) change of the temperature tolerances of the test to limits;
c) updating of the figures for clarification purposes;
d) revision of the limits of the temperature and relative humidity during conditioning;
e) revision of the intermediate measurements;
f) revision of standardized requirements for the test report.

Standard
24 pages
English language
sale 15% off
Standard
24 pages
French language
sale 15% off
Standard
48 pages
English and French language
sale 15% off

06-Aug-2025
19.040
TC 104

IEC

IEC 60068-2-78:2025(Main)

Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

IEC 60068-2-78:2025 establishes a test method for determining the ability of components or equipment to withstand transportation, storage and use under conditions of high humidity. The object of this document is to investigate the effect of high humidity at constant temperature without condensation on a specimen over a specified period. It is applicable to small equipment or components as well as large equipment and can be applied to both heat-dissipating and non-heat-dissipating specimens. This third edition cancels and replaces the second edition published in 2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) revision of the requirements for the test chamber;
b) revision of the severities and including the dew point temperatures;
c) change of the temperature tolerances of the test to limits;
d) inclusion of a specified preconditioning procedure;
e) inclusion of a new figure for clarification purposes;
f) revision of standardized requirements for the test report.

Standard
13 pages
English language
sale 15% off
Standard
40 pages
English language
sale 15% off
Standard
13 pages
French language
sale 15% off
Standard
26 pages
English and French language
sale 15% off

05-Aug-2025
19.040
29.020
TC 104

IEC

IEC 60068-3-14:2025(Main)

Environmental testing – Part 3-14: Supporting documentation and guidance – Developing a climatic sequential test

IEC 60068-3-14:2025 describes a generic process for developing a climatic sequential test programme by sequencing test methods selected from the IEC 60068-2 series.
This generic process comprises a systematic approach to the development of a sequential environmental test programme.
A climatic sequential test is applicable to electrical, electromechanical or electronic equipment and devices, as well as their subassemblies, constituent parts and components. It can be customized according to specific product requirements and applications.
The process is designed for use by product designers, manufacturers and users.
The process is particularly relevant to electrical products which include components or materials that have the potential to degrade, as a consequence of environmental exposures.

Standard
20 pages
English language
sale 15% off
Standard
21 pages
French language
sale 15% off
Standard
41 pages
English and French language
sale 15% off

17-Jul-2025
19.040
TC 104

IEC

IEC 60721-3-6:2025(Main)

Classification of environmental conditions - Part 3-6: Classification of groups of environmental parameters and their severities - Ship environments

IEC 60721-3-6:2025 classifies the groups of environmental parameters and their severities to which a product is subjected when installed aboard a ship.
Ships where electrotechnical products may be permanently or temporarily installed include
- ships propelled by mechanical means, including mobile offshore units, and
- ships not propelled by mechanical means, including sailing boats and life rafts.
The classes defined apply to all sizes of ship from pleasure craft to trawlers, ferry boats, icebreakers, cargo ships including tankers.
The areas in which ships normally navigate are
- inland waterways (canals, rivers, lakes etc.),
- coastal waters, and
- oceans.
Areas where ships navigate in ice are also included.
This second edition cancels and replaces the first edition, published in 1987, and constitutes a technical revision.
This edition includes the following significant changes with respect to the previous edition:
a) most classes have been replaced by completely new classes based on the use of new information obtained from referenced Technical Reports;
b) Table 1 through to Table 5 have been updated;
c) the content of Annex A and Annex B has either been incorporated into main body text or deleted.

Standard
31 pages
English language
sale 15% off
Standard
31 pages
French language
sale 15% off
Standard
31 pages
English and French language
sale 15% off

01-Jul-2025
19.040
TC 104

IEC

IEC 60721-2-2:2024(Main)

Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind

IEC 60721-2-2:2024 presents fundamental properties, quantities for characterization, and a classification of environmental conditions dependent on precipitation and wind relevant to electrotechnical products.
This third edition cancels and replaces the second edition published in 2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the layout of the information provided has been re-organized;
b) the information provided has been extensively enhanced and revised;
c) new information on wind severities has been included.

Standard
113 pages
English and French language
sale 15% off

24-Oct-2024
19.040
TC 104

IEC

IEC 60068-2-87:2024(Main)

Environmental testing – Part 2-87: Tests – UV-C exposure of materials and components to simulate ultraviolet germicidal Irradiation or other applications

IEC 60068-2-87:2024 describes exposures of materials and components to UV-C radiation during ultraviolet germicidal irradiation (UVGI) treatments or other processes that require UV‑C exposure and test procedures to simulate those environments. Severities representing various frequencies and intensities of UV-C exposures are described. Test conditions are described and limited to devices that utilize low pressure mercury lamps which emit most of their radiation at a single spectral line at 254 nm.

Standard
29 pages
English and French language
sale 15% off

14-Oct-2024
19.040
TC 104

Corrigendum 1 - Amendment 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

Corrigendum 1 - Amendement 1 - Essais d'environnement - Partie 2-75: Essais - Tests Eh: Essais au marteau

General Information

Relations

Buy Documents

IEC 60068-2-75:2014/AMD1:2025/COR1:2025 - Corrigendum 1 - Amendment 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests Released:12/5/2025

Get Certified

IMP NDT d.o.o.

Inštitut za kovinske materiale in tehnologije

Q Techna d.o.o.

Frequently Asked Questions

Standards Content (Sample)

Questions, Comments and Discussion

This May Also Interest You