IEC 62561-1:2023
(Main)Lightning protection system components (LPSC) - Part 1: Requirements for connection components
Lightning protection system components (LPSC) - Part 1: Requirements for connection components
IEC 62561-1:2023 is available as IEC 62561-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62561-1:2023 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, clamps, bonding and bridging components, expansion pieces and test joints. This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) definitions of connection types mentioned in the scope have been added;
b) location classification has been expanded in detail;
c) the document has been updated in line with the new edition of ISO 22479:2019 on humid sulphurous atmosphere treatment;
d) a new normative Annex E for reduced test procedures has been introduced.
Composants des systèmes de protection contre la foudre (CSPF) - Parte 1: Exigences pour les composants de connexion
IEC 62561-1:2023 est disponible sous forme de IEC 62561-1:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 62561-1:2023 spécifie les exigences et les essais applicables aux composants métalliques de connexion qui font partie d'un système de protection contre la foudre (SPF). Il peut s'agir, en général, des connecteurs, des colliers de serrage, des composants de collage et de pontage, des pièces de dilatation et des joints de contrôle. Cette troisième édition annule et remplace la deuxième édition parue en 2017. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) les définitions des types de connexions mentionnés dans le domaine d'application du document ont été ajoutées;
b) la classification des emplacements a été développée de façon détaillée;
c) le document a été mis à jour conformément à la nouvelle édition de l'ISO 22479:2019 concernant le traitement en atmosphère humide sulfureuse;
d) la nouvelle Annexe E normative concernant les procédures d'essai simplifiées a été introduite.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 62561-1 ®
Edition 3.0 2023-03
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Lightning protection system components (LPSC) –
Part 1: Requirements for connection components
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 62561-1 ®
Edition 3.0 2023-03
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Lightning protection system components (LPSC) –
Part 1: Requirements for connection components
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.020; 91.120.40 ISBN 978-2-8322-6744-8
– 2 – IEC 62561-1:2023 RLV © IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Classification . 11
4.1 According to the ability to withstand lightning current . 11
4.2 According to the installation location . 11
4.3 According to the mechanical behaviour of connection components . 11
4.4 According to whether or not a connection is permanent . 11
5 Requirements . 11
5.1 General . 11
5.2 Documentation and installation instructions . 12
5.3 Marking . 12
5.3.1 Content of marking . 12
5.3.2 Durability and legibility . 12
5.4 Lightning current carrying capability . 12
5.5 Static mechanical stress withstand capability . 13
5.6 Permanent connection . 13
5.7 Non-permanent connection . 13
5.8 Dismantling of test joints . 13
5.8 Damage to conductors and metal installations .
5.9 Reliable connection .
5.10 Terminals of bonding bars .
5.9 Expansion piece . 14
6 Tests . 14
6.1 General test conditions . 14
6.2 Documentation and installation instructions . 14
6.2.1 General test conditions . 14
6.2.2 Acceptance criteria . 14
6.3 Marking test . 14
6.3.1 General test conditions . 14
6.3.2 Acceptance criteria . 15
6.4 Preparation of the specimen . 15
6.5 Conditioning/ and ageing . 21
6.3.1 Connection components not embedded in concrete .
6.3.2 Connection components embedded in concrete .
6.6 Electrical test . 21
6.6.1 General test conditions . 21
6.6.2 Acceptance criteria . 22
6.7 Static mechanical withstand-capability test . 24
7 Electromagnetic compatibility (EMC) . 24
8 Structure and content of the test report . 24
8.1 General . 24
8.2 Report identification . 25
8.3 Specimen description . 25
8.4 Conductor . 25
8.5 Standards and references . 25
8.6 Test procedure . 26
8.7 Testing equipment description . 26
8.8 Measuring instruments description . 26
8.9 Results and parameters recorded . 26
8.10 Statement of pass or fail . 26
Annex A (normative) Summary of the requirements and corresponding tests . 27
Annex B (informative) Typical connection configurations arrangements for various
LPSC . 28
Annex C (normative) Flowchart of tests for connection components . 29
Annex D (normative) Conditioning/ and ageing for connection components . 30
D.1 General . 30
D.2 Salt mist treatment . 30
D.3 Humid sulphurous atmosphere treatment . 30
D.4 Ammonia atmosphere treatment. 30
Annex E (normative) Reduced test procedures . 31
Bibliography . 32
Figure 1 – Basic arrangement of specimen with cross-connection component . 16
Figure 2 – Basic arrangement of specimen with parallel connection component . 17
Figure 3 – Basic arrangement of specimen with bridging component .
Figure 3 – Basic arrangement of specimen with expansion piece or bridging
component . 19
Figure 4 – Basic arrangement of specimen with equipotential bonding bar . 20
Figure 5 – Basic arrangement of specimen with clamped connection of reinforcing
rods . 20
Figure 6 – Basic arrangement of specimen with welded, brazed or exothermic
connections of reinforcing rods . 21
Figure 7 – Basic arrangement for contact measurement of expansion piece or bridging
component . 22
Figure 8 – Examples of sequence of loosening of bolts and screws . 23
Figure B.1 – Typical arrangements for various LPSC . 28
Figure C.1 – Flowchart of tests for connection components . 29
Table 1 – Lightning impulse current ( I ) parameters . 22
imp
Table A.1 – Requirements and corresponding tests . 27
Table E.1 – Reduced test procedures for connection components complying with
IEC 62561-1:2017 or IEC 62561-1:2012 . 31
– 4 – IEC 62561-1:2023 RLV © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) –
Part 1: Requirements for connection components
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical conten
...
IEC 62561-1 ®
Edition 3.0 2023-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lightning protection system components (LPSC) –
Part 1: Requirements for connection components
Composants des systèmes de protection contre la foudre (CSPF) –
Partie 1: Exigences pour les composants de connexion
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez
webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un
La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour
en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.
comité d’études, …). Elle donne aussi des informations sur les
projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org
Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 300 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 19 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC Products & Services Portal - products.iec.ch
IEC 62561-1 ®
Edition 3.0 2023-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lightning protection system components (LPSC) –
Part 1: Requirements for connection components
Composants des systèmes de protection contre la foudre (CSPF) –
Partie 1: Exigences pour les composants de connexion
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.020; 91.120.40 ISBN 978-2-8322-6650-2
– 2 – IEC 62561-1:2023 © IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Classification . 11
4.1 According to the ability to withstand lightning current . 11
4.2 According to the installation location . 11
4.3 According to the mechanical behaviour of connection components . 11
4.4 According to whether or not a connection is permanent . 11
5 Requirements . 11
5.1 General . 11
5.2 Documentation and installation instructions . 11
5.3 Marking . 12
5.3.1 Content of marking . 12
5.3.2 Durability and legibility . 12
5.4 Lightning current carrying capability . 12
5.5 Static mechanical withstand capability . 12
5.6 Permanent connection . 12
5.7 Non-permanent connection . 13
5.8 Dismantling of test joints . 13
5.9 Expansion piece . 13
6 Tests . 13
6.1 General test conditions . 13
6.2 Documentation and installation instructions . 14
6.2.1 General test conditions . 14
6.2.2 Acceptance criteria . 14
6.3 Marking test . 14
6.3.1 General test conditions . 14
6.3.2 Acceptance criteria . 14
6.4 Preparation of the specimen . 14
6.5 Conditioning and ageing . 19
6.6 Electrical test . 19
6.6.1 General test conditions . 19
6.6.2 Acceptance criteria . 20
6.7 Static mechanical withstand-capability test . 21
7 Electromagnetic compatibility (EMC) . 21
8 Structure and content of the test report . 22
8.1 General . 22
8.2 Report identification . 22
8.3 Specimen description . 22
8.4 Conductor . 22
8.5 Standards and references . 23
8.6 Test procedure . 23
8.7 Testing equipment description . 23
8.8 Measuring instruments description . 23
8.9 Results and parameters recorded . 23
8.10 Statement of pass or fail . 23
Annex A (normative) Summary of the requirements and corresponding tests . 24
Annex B (informative) Typical connection arrangements for various LPSC . 25
Annex C (normative) Flow chart of tests for connection components . 26
Annex D (normative) Conditioning and ageing for connection components . 27
D.1 General . 27
D.2 Salt mist treatment . 27
D.3 Humid sulphurous atmosphere treatment . 27
D.4 Ammonia atmosphere treatment. 27
Annex E (normative) Reduced test procedures . 28
Bibliography . 29
Figure 1 – Basic arrangement of specimen with cross-connection component . 15
Figure 2 – Basic arrangement of specimen with parallel connection component . 16
Figure 3 – Basic arrangement of specimen with expansion piece or bridging
component . 17
Figure 4 – Basic arrangement of specimen with equipotential bonding bar . 18
Figure 5 – Basic arrangement of specimen with clamped connection of reinforcing
rods . 18
Figure 6 – Basic arrangement of specimen with welded, brazed or exothermic
connections of reinforcing rods . 19
Figure 7 – Basic arrangement for contact measurement of expansion piece or bridging
component . 20
Figure 8 – Examples of sequence of loosening of bolts and screws . 21
Figure B.1 – Typical arrangements for various LPSC . 25
Figure C.1 – Flowchart of tests for connection components . 26
Table 1 – Lightning impulse current ( I ) parameters . 20
imp
Table A.1 – Requirements and corresponding tests . 24
Table E.1 –
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.