IEC 60519-1:2020
(Main)Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
IEC 60519-1:2020 is available as IEC 60519-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60519-1:2020 specifies the general safety requirements for industrial installations or equipment intended for electroheating (EH) and electroheating based treatment technologies as well as for electromagnetic processing of materials (EPM). This document deals with the significant hazards, hazardous situations or hazardous events relevant to industrial EH and EPM equipment, as listed in Annex A, for normal operation and for single fault condition as well as under conditions of reasonably foreseeable misuse. This sixth edition cancels and replaces the fifth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- removal of noise from the scope;
- clarification of EMC requirements;
- risk classification of hazards based on emission for all processing frequencies;
- clarification of boundaries between IEC 60519 (all parts) and ISO 13577 (all parts).
Sécurité dans les installations destinées au traitement électrothermique et électromagnétique - Partie 1: Exigences générales
IEC 60519-1:2020 est disponible sous forme de IEC 60519-1:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L’IEC 60519-1:2020 spécifie les exigences générales de sécurité relatives aux installations ou équipements industriels destinés à l’électrothermie (EH) et aux technologies de traitement fondées sur l’électrothermie ainsi qu’au traitement électromagnétique des matériaux (EPM). Le présent document traite des dangers significatifs, des situations dangereuses ou des événements dangereux liés aux équipements industriels EH et EPM, tels qu’ils sont répertoriés dans l’Annexe A, dans des conditions de fonctionnement normal et en condition de premier défaut ainsi que dans des conditions de mauvaise utilisation raisonnablement prévisibles. Cette sixième édition annule et remplace la cinquième édition parue en 2015. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
- suppression du bruit du domaine d’application;
- clarification des exigences relatives à la CEM;
- classification des risques associés aux dangers, fondée sur l’émission pour toutes les fréquences de traitement;
- clarification des limites entre l’IEC 60519 (toutes les parties) et l’ISO 13577 (toutes les parties).
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 60519-1 ®
Edition 6.0 2020-03
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Safety in installations for electroheating and electromagnetic processing –
Part 1: General requirements
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 60519-1 ®
Edition 6.0 2020-03
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Safety in installations for electroheating and electromagnetic processing –
Part 1: General requirements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.180.10 ISBN 978-2-8322-4200-1
– 2 – IEC 60519-1:2020 RLV © IEC 2020
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope and object . 10
2 Normative references . 11
3 Terms, definitions and abbreviated terms . 16
3.1 General concepts . 16
3.2 Equipment and state of equipment . 18
3.3 Parts and accessories . 19
3.4 Safety related concepts . 21
3.5 Abbreviated terms . 23
4 Classification and subdivision of equipment and installations . 24
4.1 Classification by processing frequency. 24
4.2 Classification by voltage . 25
4.3 Subdivision of installation and equipment . 25
4.3.1 Subdivision into parts . 25
4.3.2 Hierarchy and structure of requirements . 28
4.4 Classification of hazards and risks . 28
4.4.1 Classification of hazards . 28
4.4.2 Classification of risks . 29
4.4.3 Limits .
5 Risk assessment . 30
6 General provisions. 30
6.1 Basic considerations . 30
6.2 Significant hazards . 32
6.3 Physical environment and operating conditions for the installation as such
and electrical equipment outside the processing equipment . 32
6.4 Physical environment and operating conditions for electrical equipment
inside caused by operation of the processing equipment . 33
6.5 Power supply . 34
6.6 Access . 34
6.7 Ergonomic aspects . 35
6.8 Transport and storage . 35
6.9 Provisions for handling. 36
6.10 Consumables and replaceable parts . 36
7 Protection against hazards from electric shock . 36
7.1 General . 36
7.2 Fundamental rule of protection . 36
7.3 General provisions . 37
7.4 Basic protection . 38
7.5 Provisions for protection in electric single fault condition . 39
7.6 Protective equipotential bonding . 40
7.7 Additional provisions for fault protection for frequencies above 200 Hz . 42
7.8 Protective conductor currents Currents in protective conductors . 43
7.9 Touch current and touch voltage . 44
7.10 Conductors and insulations at high temperature . 44
7.11 Non-electric faults . 45
8 Protection against hazards caused by from electric or magnetic nearfields fields . 45
8.1 General . 45
8.2 Magnetic fields . 45
8.3 Magnetic fields below 1 Hz . 45
8.4 Local electric fields . 46
8.5 Requirements related to barriers and screens . 46
8.6 Requirements related to objects worn, carried or held by persons . 47
9 Protection against hazards from radiation . 48
9.1 General . 48
9.2 Installation or equipment generating ionizing radiation . 48
9.3 Ultraviolet radiation . 49
9.4 Visible and infrared radiation . 50
9.5 Laser sources . 50
10 Protection against hazards from thermal influences . 50
10.1 General . 50
10.2 Surface temperature limits for protection against burn . 51
10.3 Hazards caused by working conditions . 51
10.4 Heat Temperature resistance of components . 52
10.5 Cooling . 52
10.6 Over-temperature protection . 53
11 Protection against hazards from fire . 54
12 Protection against hazards from fluids . 55
12.1 General . 55
12.2 Poisonous and injurious gases and substances fluids . 56
12.3 Explosion and implosion of pressurised parts or vacuum equipment . 56
13 Specific requirements for components and subassemblies . 56
13.1 General . 56
13.2 Electrical equipment and conductors . 56
13.3 Connection to the electrical supply network and internal connections . 57
13.4 Isolation and switching . 58
13.5 Sensors and actuators safeguarding moving parts . 59
13.6 Motors . 59
13.7 Non electric-heating means . 59
13.8 Lighting . 59
13.9 Structural parts and stability. 59
13.10 Doors, windows and other openings . 59
13.11 Transformers, inductors, capacitors . 59
13.12 Handheld applicators . 60
13.13 Vacuum system . 60
13.14 Protective and reactive gas generator . 60
14 Control of the installation or equipment . 60
14.1 General . 60
14.2 Operator control unit . 61
14.3 Emergency stop . 61
14.4 Control systems and their safety functions . 62
14.5 Controlgear . 63
14.6 Protective devices . 64
14.7 Over-temperature protective device protection devices and systems . 65
– 4 – IEC 60519-1:2020 RLV © IEC 2020
14.8 Overpressure safety device . 65
15 Protection against mechanical hazards . 66
16 Protection against hazards resulting from use . 67
16.1 Partic
...
IEC 60519-1 ®
Edition 6.0 2020-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Safety in installations for electroheating and electromagnetic processing –
Part 1: General requirements
Sécurité dans les installations destinées au traitement électrothermique
et électromagnétique –
Partie 1: Exigences générales
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.
IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60519-1 ®
Edition 6.0 2020-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Safety in installations for electroheating and electromagnetic processing –
Part 1: General requirements
Sécurité dans les installations destinées au traitement électrothermique
et électromagnétique –
Partie 1: Exigences générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.180.10 ISBN 978-2-8322-7898-7
– 2 – IEC 60519-1:2020 © IEC 2020
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms, definitions and abbreviated terms . 14
3.1 General concepts . 14
3.2 Equipment and state of equipment . 16
3.3 Parts and accessories . 17
3.4 Safety related concepts . 19
3.5 Abbreviated terms . 20
4 Classification and subdivision of equipment and installations . 21
4.1 Classification by processing frequency. 21
4.2 Classification by voltage . 22
4.3 Subdivision of installation and equipment . 23
4.3.1 Subdivision into parts . 23
4.3.2 Hierarchy and structure of requirements . 25
4.4 Classification of hazards and risks . 25
4.4.1 Classification of hazards . 25
4.4.2 Classification of risks . 26
5 Risk assessment . 26
6 General provisions. 27
6.1 Basic considerations . 27
6.2 Significant hazards . 28
6.3 Physical environment and operating conditions for the installation as such
and electrical equipment outside the processing equipment . 28
6.4 Physical environment and operating conditions for electrical equipment
caused by operation of the processing equipment . 29
6.5 Power supply . 30
6.6 Access . 31
6.7 Ergonomic aspects . 31
6.8 Transport and storage . 31
6.9 Provisions for handling. 32
6.10 Consumables and replaceable parts . 32
7 Protection against hazards from electric shock . 32
7.1 General . 32
7.2 Fundamental rule of protection . 32
7.3 General provisions . 33
7.4 Basic protection . 34
7.5 Provisions for protection in electric single fault condition . 35
7.6 Protective equipotential bonding . 36
7.7 Additional provisions for fault protection for frequencies above 200 Hz . 38
7.8 Currents in protective conductors . 39
7.9 Touch current and touch voltage . 39
7.10 Conductors and insulations at high temperature . 40
7.11 Non-electric faults . 40
8 Protection against hazards from electric or magnetic fields . 40
8.1 General . 40
8.2 Magnetic fields . 40
8.3 Magnetic fields below 1 Hz . 41
8.4 Local electric fields . 41
8.5 Requirements related to barriers and screens . 41
8.6 Requirements related to objects worn, carried or held by persons . 42
9 Protection against hazards from radiation . 43
9.1 General . 43
9.2 Installation or equipment generating ionizing radiation . 43
9.3 Ultraviolet radiation . 44
9.4 Visible and infrared radiation . 44
9.5 Laser sources . 45
10 Protection against hazards from thermal influences . 45
10.1 General . 45
10.2 Surface temperature limits for protection against burn . 45
10.3 Hazards caused by working conditions . 46
10.4 Temperature resistance of components. 46
10.5 Cooling . 46
10.6 Over-temperature protection . 47
11 Protection against hazards from fire . 48
12 Protection against hazards from fluids . 48
12.1 General . 48
12.2 Poisonous and injurious fluids . 49
12.3 Explosion and implosion of pressurised parts or vacuum equipment . 50
13 Specific requirements for components and subassemblies . 50
13.1 General . 50
13.2 Electrical equipment and conductors .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.