Primary batteries - Part 2: Physical and electrical specifications

IEC 60086-2:2021 is applicable to primary batteries which are based on standardised electrochemical systems.
It specifies
– the physical dimensions,
– the discharge test conditions and discharge performance requirements.
The contents of the corrigendum of June 2022 have been included in this copy.

Piles électriques - Partie 2: Spécifications physiques et électriques

L'IEC 60086-2:2021 s’applique aux piles électriques qui ont recours à des systèmes électrochimiques normalisés.
Elle spécifie:
– les dimensions physiques,
– les conditions d’essai de décharge et les exigences de performance en décharge.
Le contenu du corrigendum de juin 2022 a été pris en considération dans cet exemplaire.

General Information

Status
Published
Publication Date
26-Apr-2021
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
14-May-2021
Completion Date
27-Apr-2021
Ref Project

Relations

Buy Standard

Standard
IEC 60086-2:2021 - Primary batteries - Part 2: Physical and electrical specifications
English language
58 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 60086-2:2021 - Primary batteries - Part 2: Physical and electrical specifications
English and French language
118 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60086-2 ®
Edition 14.0 2021-04
INTERNATIONAL
STANDARD
Primary batteries –
Part 2: Physical and electrical specifications
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 60086-2 ®
Edition 14.0 2021-04
INTERNATIONAL
STANDARD
Primary batteries –
Part 2: Physical and electrical specifications

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.220.10 ISBN 978-2-8322-9685-1

– 2 – IEC 60086-2:2021 © IEC 2021
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, symbols and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Symbols and abbreviated terms . 10
4 Battery dimensions, symbols . 10
5 Dimensional stability . 11
6 Validity of testing . 11
7 Constitution of the battery specification tables . 11
8 Physical and electrical specifications . 13
8.1 Category 1 batteries . 13
8.1.1 General . 13
8.1.2 Category 1 – Specifications: LR1, R1, LR8D425 . 14
8.1.3 Category 1 – Specifications: LR03, FR10G445, R03 . 15
8.1.4 Category 1 – Specifications: LR6, FR14505, R6P, R6S . 16
8.1.5 Category 1 – Specifications: LR14, R14P, R14S . 17
8.1.6 Category 1 – Specifications: LR20, R20P, R20S . 18
8.2 Category 2 batteries – Specifications: CR14250, CR15H270, CR17345,
CR17450, BR17335 . 19
8.3 Category 3 batteries – Specifications: LR9, CR11108 . 20
8.4 Category 4 batteries . 21
8.4.1 General . 21
8.4.2 Category 4 – Specifications: PR70, PR41, PR48, PR44, PR1154 . 21
8.4.3 Fit acceptance gauge for PR batteries . 23
8.4.4 Category 4 – Specifications: LR41, LR55, LR54, LR43, LR44 . 24
8.4.5 Category 4 – Specifications: SR62, SR63, SR65, SR64, SR60, SR67,
SR66, SR58, SR68, SR59, SR69, SR41, SR57, SR55, SR48, SR54,
SR42, SR43, SR44 . 26
8.4.6 Category 4 – Specifications: CR1025, CR1216, CR1220, CR1225,
CR1616, CR2012, CR1620, CR1632, CR2016, CR2025, CR2320,
CR2032, CR2330, CR2430, CR2354, CR3032, CR2450, CR2477,
BR1225, BR2016, BR2320, BR2325, BR3032 . 28
8.5 Category 5 batteries . 30
8.5.1 Category 5 – Specifications: 2CR13252, 4LR44, 4SR44 . 30
8.5.2 Category 5 – Specification: 8LR932 . 32
8.5.3 Category 5 – Specifications: AR40, 5AR40, 6AR40, 5PR175/172,
6PR225/155. 33
8.6 Category 6 batteries . 34
8.6.1 Category 6 – Specification: 4LR61 . 34
8.6.2 Category 6 – Specification: CR-P2 . 35
8.6.3 Category 6 – Specification: 2CR5 . 36
8.6.4 Category 6 – Specifications: 3R12P, 3R12S, 3LR12 . 37
8.6.5 Category 6 – Specifications: AS4, AS6, AS8, AS10, AS12, PS8S,
PS8P, PS10. 38
8.6.6 Category 6 – Specification: 4R25Y . 39

8.6.7 Category 6 – Specifications: 4R25X, 4LR25X . 40
8.6.8 Category 6 – Specifications: 4R25-2, 4LR25-2 . 41
8.6.9 Category 6 – Specifications: 6AS4S, 6PS4S, 6PS4P . 42
8.6.10 Category 6 – Specifications: 6F22, 6LR61, 6LP3146 . 43
8.6.11 Category 6 – Configurations: Stud for 6F22, 6LR61 6LP3146 . 44
8.6.12 Category 6 – Specifications: 6AS6P, 6AS6S, 6PS6P, 6PS6S. 45
Annex A (informative) Tabulation of batteries by application . 46
Annex B (informative) Cross-reference index . 52
Annex C (informative) Index . 55
Annex D (informative) Common designation. 56
Annex E (informative) Compliance checklist . 57
Bibliography . 58

Figure 1 – Dimensional drawing: Category 1 . 13
Figure 2 – Dimensional drawing: LR1, R1, LR8D425 . 14
Figure 3 – Dimensional drawing: LR03, FR10G445, R03 . 15
Figure 4 – Dimensional drawing: LR6, FR14505, R6P, R6S . 16
Figure 5 – Dimensional drawing: LR14, R14P, R14S . 17
Figure 6 – Dimensional drawing: LR20, R20P, R20S . 18
Figure 7 – Dimensional drawing: CR14250, CR15H270, CR17345, CR17450, BR17335 . 19
Figure 8 – Dimensional drawing: LR9, CR11108 . 20
Figure 9 – Dimensional drawing: Category 4 . 21
Figure 10 – Dimensional drawing: PR70, PR41, PR48, PR44, PR1154 . 21
Figure 11 – Gauge opening for P system batteries . 23
Figure 12 – Suggested gauge layout . 23
Figure 13 – Air hole placement diagram for P system batteries . 24
Figure 14 – Dimensional drawing: LR41, LR55, LR54, LR43, LR44 . 24
Figure 15 – Dimensional drawing: SR62, SR63, SR65, SR64, SR60, SR67, SR66,
SR58, SR68, SR59, SR69, SR41, SR57, SR55, SR48, SR54, SR42, SR43, SR44 . 26
Figure 16 – Dimensional drawing: CR1025, CR1216, CR1220, CR1225, CR1616,
CR2012, CR1620, CR2016, CR2412, CR1632, CR2025, CR2320, CR2032, CR2330,
CR2430, CR2354, CR2477, CR3032, CR2450, BR1225, BR2016, BR2320, BR2325,
BR3032 . 28
Figure 17 – Dimensional drawing: 2CR13252, 4LR44, 4SR44 . 30
Figure 18 – Dimensional drawing: 8LR932 . 32
Figure 19 – Dimensional drawing: AR40, 5AR40, 6AR40, 5PR175/172, 6PR225/155 . 33
Figure 20 – Dimensional drawing: 4LR61 . 34
Figure 21 – Dimensional drawing: CR-P2 . 35
Figure 22 – Dimensional drawing: 2CR5 . 36
Figure 23 – Dimensional drawing: 3R12P, 3R12S, 3LR12 . 37
Figure 24 – Dimensional drawing: AS4, AS6, AS8, AS10, AS12, PS8S, PS8P, PS10 . 38
Figure 25 – Dimensional drawing: 4R25Y. 39
Figure 26 – Dimensional drawing: 4R25X, 4LR25X . 40
Figure 27 – Dimensional drawing: 4R25-2, 4LR25‑2 . 41
Figure 28 – Dimensional drawing: 6AS4S, 6PS4S, 6PS4P . 42

– 4 – IEC 60086-2:2021 © IEC 2021
Figure 29 – Dimensional drawing: 6F22, 6LR61, 6LP3146 . 43
Figure 30 – Dimensional drawing: Stud . 44
Figure 31 – Dimensional drawing: 6AS6P, 6AS6S, 6PS6P, 6PS6S . 45

Table 1 – Gauge opening dimension (mm) . 23
Table A.1 – Automatic camera . 46
Table A.2 – CD, digital audio, wireless gaming and accessories . 46
Table A.3 – Digital audio . 46
Table A.4 – Digital still camera . 46
Table A.5 – Electric equipment . 46
Table A.6 – Electrical fence equipment, parking meters, light houses, beacons, railway
signaling and road signaling. 47
Table A.7 – Electronic key . 47
Table A.8 – Hearing aid . 47
Table A.9 – Hearing aid standard . 48
Table A.10 – High intensity lighting .
...


IEC 60086-2 ®
Edition 14.0 2021-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Primary batteries –
Part 2: Physical and electrical specifications

Piles électriques –
Partie 2: Spécifications physiques et électriques

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 18 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez
webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un
La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour
en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.
comité d’études, …). Elle donne aussi des informations sur les
projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org

Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 000 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 16 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.

Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC online collection - oc.iec.ch

IEC 60086-2 ®
Edition 14.0 2021-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Primary batteries –
Part 2: Physical and electrical specifications

Piles électriques –
Partie 2: Spécifications physiques et électriques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.10 ISBN 978-2-8322-1042-7

– 2 – IEC 60086-2:2021 © IEC 2021
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, symbols and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Symbols and abbreviated terms . 10
4 Battery dimensions, symbols . 10
5 Dimensional stability . 11
6 Validity of testing . 11
7 Constitution of the battery specification tables . 11
8 Physical and electrical specifications . 13
8.1 Category 1 batteries . 13
8.1.1 General . 13
8.1.2 Category 1 – Specifications: LR1, R1, LR8D425 . 14
8.1.3 Category 1 – Specifications: LR03, FR10G445, R03 . 15
8.1.4 Category 1 – Specifications: LR6, FR14505, R6P, R6S . 16
8.1.5 Category 1 – Specifications: LR14, R14P, R14S . 17
8.1.6 Category 1 – Specifications: LR20, R20P, R20S . 18
8.2 Category 2 batteries – Specifications: CR14250, CR15H270, CR17345,
CR17450, BR17335 . 19
8.3 Category 3 batteries – Specifications: LR9, CR11108 . 20
8.4 Category 4 batteries . 21
8.4.1 General . 21
8.4.2 Category 4 – Specifications: PR70, PR41, PR48, PR44, PR1154 . 21
8.4.3 Fit acceptance gauge for PR batteries . 23
8.4.4 Category 4 – Specifications: LR41, LR55, LR54, LR43, LR44 . 24
8.4.5 Category 4 – Specifications: SR62, SR63, SR65, SR64, SR60, SR67,
SR66, SR58, SR68, SR59, SR69, SR41, SR57, SR55, SR48, SR54,
SR42, SR43, SR44 . 26
8.4.6 Category 4 – Specifications: CR1025, CR1216, CR1220, CR1225,
CR1616, CR2012, CR1620, CR1632, CR2016, CR2025, CR2320,
CR2032, CR2330, CR2430, CR2354, CR3032, CR2450, CR2477,
BR1225, BR2016, BR2320, BR2325, BR3032 . 28
8.5 Category 5 batteries . 30
8.5.1 Category 5 – Specifications: 2CR13252, 4LR44, 4SR44 . 30
8.5.2 Category 5 – Specification: 8LR932 . 32
8.5.3 Category 5 – Specifications: AR40, 5AR40, 6AR40, 5PR175/172,
6PR225/155. 33
8.6 Category 6 batteries . 34
8.6.1 Category 6 – Specification: 4LR61 . 34
8.6.2 Category 6 – Specification: CR-P2 . 35
8.6.3 Category 6 – Specification: 2CR5 . 36
8.6.4 Category 6 – Specifications: 3R12P, 3R12S, 3LR12 . 37
8.6.5 Category 6 – Specifications: AS4, AS6, AS8, AS10, AS12, PS8S,
PS8P, PS10. 38
8.6.6 Category 6 – Specification: 4R25Y . 39
8.6.7 Category 6 – Specifications: 4R25X, 4LR25X . 40

8.6.8 Category 6 – Specifications: 4R25-2, 4LR25-2 . 41
8.6.9 Category 6 – Specifications: 6AS4S, 6PS4S, 6PS4P . 42
8.6.10 Category 6 – Specifications: 6F22, 6LR61, 6LP3146 . 43
8.6.11 Category 6 – Configurations: Stud for 6F22, 6LR61 6LP3146 . 44
8.6.12 Category 6 – Specifications: 6AS6P, 6AS6S, 6PS6P, 6PS6S. 45
Annex A (informative) Tabulation of batteries by application . 46
Annex B (informative) Cross-reference index . 52
Annex C (informative) Index . 55
Annex D (informative) Common designation. 56
Annex E (informative) Compliance checklist . 57
Bibliography . 58

Figure 1 – Dimensional drawing: Category 1 . 13
Figure 2 – Dimensional drawing: LR1, R1, LR8D425 . 14
Figure 3 – Dimensional drawing: LR03, FR10G445, R03 . 15
Figure 4 – Dimensional drawing: LR6, FR14505, R6P, R6S . 16
Figure 5 – Dimensional drawing: LR14, R14P, R14S . 17
Figure 6 – Dimensional drawing: LR20, R20P, R20S . 18
Figure 7 – Dimensional drawing: CR14250, CR15H270, CR17345, CR17450, BR17335 . 19
Figure 8 – Dimensional drawing: LR9, CR11108 . 20
Figure 9 – Dimensional drawing: Category 4 . 21
Figure 10 – Dimensional drawing: PR70, PR41, PR48, PR44, PR1154 . 21
Figure 11 – Gauge opening for P system batteries . 23
Figure 12 – Suggested gauge layout . 23
Figure 13 – Air hole placement diagram for P system batteries . 24
Figure 14 – Dimensional drawing: LR41, LR55, LR54, LR43, LR44 . 24
Figure 15 – Dimensional drawing: SR62, SR63, SR65, SR64, SR60, SR67, SR66,
SR58, SR68, SR59, SR69, SR41, SR57, SR55, SR48, SR54, SR42, SR43, SR44 . 26
Figure 16 – Dimensional drawing: CR1025, CR1216, CR1220, CR1225, CR1616,
CR2012, CR1620, CR2016, CR2412, CR1632, CR2025, CR2320, CR2032, CR2330,
CR2430, CR2354, CR2477, CR3032, CR2450, BR1225, BR2016, BR2320, BR2325,
BR3032 . 28
Figure 17 – Dimensional drawing: 2CR13252, 4LR44, 4SR44 . 30
Figure 18 – Dimensional drawing: 8LR932 . 32
Figure 19 – Dimensional drawing: AR40, 5AR40, 6AR40, 5PR175/172, 6PR225/155 . 33
Figure 20 – Dimensional drawing: 4LR61 . 34
Figure 21 – Dimensional drawing: CR-P2 .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.