Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories

IEC 60455-3-8:2013 gives the requirements for resins for power cable accessories which conform to this specification and meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not on this specification alone. Key words: requirements for resins for power cable accessories

Composés réactifs à base de résines utilisés comme isolants électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 8: Résines pour accessoires de câble

La CEI 60455-3-8:2013 contient les exigences pour les résines pour accessoires de câble de puissance conformes à la présente spécification et répondant aux niveaux de performances établis. Cependant, il convient que le choix d'un matériau, par un utilisateur, pour une application spécifique, soit fondé sur les exigences réelles nécessaires pour une performance adéquate de cette application, et non fondé sur cette seule spécification. Mots clés: exigences pour les résines pour accessoires de câble de puissance

General Information

Status
Published
Publication Date
28-Apr-2013
Current Stage
DELPUB - Deleted Publication
Start Date
31-Jul-2017
Completion Date
16-Jun-2021
Ref Project

Relations

Buy Standard

Standard
IEC 60455-3-8:2013 - Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
English and French language
25 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60455-3-8 ®
Edition 1.0 2013-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Resin based reactive compounds used for electrical insulation –
Part 3: Specifications for individual materials
Sheet 8: Resins for cable accessories

Composés réactifs à base de résines utilisés comme isolants électriques –
Partie 3: Spécifications pour matériaux particuliers
Feuille 8: Résines pour accessoires de câble

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 60455-3-8 ®
Edition 1.0 2013-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Resin based reactive compounds used for electrical insulation –

Part 3: Specifications for individual materials

Sheet 8: Resins for cable accessories

Composés réactifs à base de résines utilisés comme isolants électriques –

Partie 3: Spécifications pour matériaux particuliers

Feuille 8: Résines pour accessoires de câble

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
M
CODE PRIX
ICS 29.035.01 ISBN 978-2-83220-758-1

– 2 – 60455-3-8 © IEC:2013
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Designation . 7
5 Type testing . 7
5.1 General . 7
5.2 Sampling . 8
5.3 Preparation and conditioning . 8
5.3.1 General . 8
5.3.2 Individual components prior to mixing . 8
5.3.3 Resin just after mixing (curing stage) . 8
5.3.4 Cured resin (original) . 8
5.3.5 Cured resin after thermal ageing (dry and wet) . 8
5.4 Sequence of tests . 8
5.5 Test report . 9
6 Test methods . 9
7 Information on supply, packaging, marking and labelling . 12
7.1 Packaging . 12
7.2 Marking and labelling . 12
7.2.1 General . 12
7.2.2 Components . 12
7.2.3 Accessory kit . 12
Bibliography . 13

Table 1 – Categories of resins . 7
Table 2 – Type tests: test methods and requirements . 10

60455-3-8 © IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RESIN BASED REACTIVE COMPOUNDS
USED FOR ELECTRICAL INSULATION –

Part 3: Specifications for individual materials
Sheet 8: Resins for cable accessories

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60455-3-8 has been prepared by IEC technical committee 15:
Solid electrical insulating materials, in collaboration with working group 11 of Cenelec
technical committee 20.
The text of this standard is based on the following documents:
FDIS Report on voting
15/701/FDIS 15/711/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – 60455-3-8 © IEC:2013
A list of all the parts in the IEC 60455 series, published under the general title Resin based
reactive compounds used for electrical insulation, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60455-3-8 © IEC:2013 – 5 –
INTRODUCTION
This part of IEC 60455-3-8 is one of a series which deals with specifications for reactive
compounds and their components for electrical insulation. This series consist of three parts:
Part 1: Definitions and general requirements (IEC 60455-1);
Part 2: Methods of test (IEC 60455-2);
Part 3: Specifications for individual materials (IEC 60455-3)
IEC 60455-3-8 consists of one of the sheets comprising Part 3 as follows:
Sheet 8: Resins for cable accessories

– 6 – 60455-3-8 © IEC:2013
RESIN BASED REACTIVE COMPOUNDS
USED FOR ELECTRICAL INSULATION –

Part 3: Specifications for individual materials
Sheet 8: Resins for cable accessories

1 Scope
This sheet 8 of IEC 60455-3 gives the requirements for resins for power cable accessories
which conform to this specification and meet established levels of per
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.