Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13 elements

IEC 61158-4-13:2007 provides basic time-critical messaging communications between devices in an automation environment. This protocol provides communication opportunities to all participating data-link entities in a synchronously-starting cyclic manner, according to a pre-established schedule, and in a cyclic or acyclic asynchronous manner, as requested each cycle by each of those data-link entities. This first edition and its companion parts of the IEC 61158-4 subseries cancel and replace IEC 61158-4:2003. This edition of this part constitutes a technical addition, which also replaces IEC/PAS 62408, published in 2005. This edition of IEC 61158-4 includes the following significant changes from the previous edition:
- deletion of the former Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data link layer, for lack of market relevance;
- addition of new types of fieldbuses;
- division of this part into multiple parts numbered -4-1, -4-2, , -4-19. This bilingual version (2014-12) corresponds to the monolingual English version, published in 2007-12.

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 4-13: Spécification des protocoles des couches de liaison de données - Eléments de type 13

L'IEC 61158-4-13:2007 définit la couche liaison de données qui assure les communications de messagerie de base à temps critique entre les appareils d'un environnement d'automatisation. Ce protocole offre des opportunités de communication à toutes les entités de liaison de données participantes de manière cyclique avec un démarrage synchrone, selon une programmation préétablie, et de manière cyclique ou acyclique et asynchrone, comme demandé par chaque cycle de chacune de ces entités de liaison de données. Cette première édition et les autres parties de la sous-série CEI 61158-4 annulent et remplacent la CEI 61158-4:2003. Cette édition de la présente partie constitue un ajout technique, qui remplace également la CEI/PAS 62408, publiée en 2005. Cette édition de la CEI 61158-4 inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- suppression de l'ancien bus de terrain de type 6, et le réceptacle pour une couche liaison de données de bus terrain de type 5, en raison du manque d'adéquation au marché;
- ajout de nouveaux types de bus de terrain;
- division de la présente partie en plusieurs parties numérotées -4-1, -4-2, , -4-19. La présente version bilingue (2014-12) correspond à la version anglaise monolingue publiée en 2007-12.

General Information

Status
Published
Publication Date
13-Dec-2007
Technical Committee
Drafting Committee
Current Stage
DELPUB - Deleted Publication
Completion Date
15-Aug-2014
Ref Project

Relations

Buy Standard

Standard
IEC 61158-4-13:2007 - Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13 elements Released:12/14/2007 Isbn:2831894379
English language
83 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61158-4-13:2007 - Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13 elements Released:12/14/2007 Isbn:9782832219508
English and French language
169 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61158-4-13
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 4-13: Data-link layer protocol specification – Type 13 elements

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61158-4-13
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 4-13: Data-link layer protocol specification – Type 13 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XC
ICS 35.100.20; 25.040.40 ISBN 2-8318-9437-9

– 2 – 61158-4-13 © IEC:2007(E)
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
1.1 General .8
1.2 Specifications.8
1.3 Procedures.8
1.4 Applicability.9
1.5 Conformance.9
2 Normative references .9
3 Terms, definitions, symbols and abbreviations.9
3.1 Reference model terms and definitions.9
3.2 Service convention terms and definitions.11
3.3 Data-link service terms and definitions .12
3.4 Symbols and abbreviations.17
3.5 Common conventions .18
3.6 Additional conventions .19
4 Overview of the DL-protocol .19
4.1 Overview .19
4.2 General description .19
4.3 Service assumed from the PhL .22
4.4 DLL architecture.23
4.5 Local parameters and variables.24
5 General structure and encoding of PhIDUs and DLPDU and related elements of
procedure.26
5.1 Overview .26
5.2 MA_PDU structure and encoding.26
5.3 Common MAC frame structure, encoding and elements of procedure .27
5.4 Invalid DLPDU.29
6 DLPDU-specific structure, encoding and elements of procedure .29
6.1 General .29
6.2 Overview .30
6.3 Start of synchronization (SoC).30
6.4 PollRequest (PReq).32
6.5 Poll response (PRes) .34
6.6 Start of asynchronous (SoA).38
6.7 Asynchronous send (ASnd) .41
7 DLE elements of procedure .45
7.1 Overall structure.45
7.2 Cycle state machine (CSM) .45
7.3 Isochronous transmission TX/RX control (ITC) .65
7.4 Asynchronous transmission TX/RX control (ATC) .69
7.5 Asynchronous slot scheduler (ASS).73
7.6 Exception signaling (ES) .75
7.7 NMT signaling (NS) .77
7.8 DLL management protocol.78
Bibliography.83

61158-4-13 © IEC:2007(E) – 3 –

Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses .14
Figure 2 – Slot communication network management.20
Figure 3 – Overall flow of data frames during one cycle .20
Figure 4 – Interaction of PhS primitives to DLE.22
Figure 5 – Data-link layer internal architecture.24
Figure 6 – Type 13 fieldbus DLPDU .27
Figure 7 – State transition diagram of the MNs CSM.51
Figure 8 – State transition diagram of MNs CSM at CSM_MS_NON_CYCLIC .53
Figure 9 – State transition diagram of MNs CSM at CSM_MS_CYCLIC.55
Figure 10 – State transition diagram of the CNs CSM .59
Figure 11 – State transition diagram of CNs CSM at CSM_CS_NON_CYCLIC .60
Figure 12 – State transition diagram of CNs CSM at CSM_CS_CYCLIC.61
Figure 13 – Multiple slot assignment.66
Figure 14 – State transition diagram of ITC.68
Figure 15 – State transition diagram of ATC .71
Figure 16 – State transition diagram of ASS .74
Figure 17 – State transition diagram of ES.76
Figure 18 – State transition diagram of NS.78
Figure 19 – State transition diagram of DLM .81

Table 1 – Data-link layer components .23
Table 2 – MAC multicast addresses .28
Table 3 – Message types .28
Table 4 – Node ID assignment .29
Table 5 – Structure of SoC DLPDU .30
Table 6 – Structure of SoC-Flag.31
Table 7 – Structure of PReq DLPDU .33
Table 8 – Structure of PReq-Flag.33
Table 9 – Structure of PRes DLPDU .35
Table 10 – Structure of PRes-Flag .36
Table 11 – Structure of SoA DLPDU .38
Table 12 – Structure of SoA-Flag.39
Table 13 – Definition of the RequestedServiceID in the SoA DLPDU.40
Table 14 – Structure of ASnd DLPDU .42
Table 15 – Definition of the ServiceID in the ASnd DLPDU .43
Table 16 – Structure of NMTRequest user data.44
Table 17 – Primitives exchanged between CSM and ITC .46
Table 18 – Parameters used with primitives exchanged between CSM and ITC .46
Table 19 – Primitives exchanged between CSM and ATC .47
Table 20 – Parameters used with primitives exchanged between CSM and ATC .47
Table 21 – Primitives exchanged between CSM and ASS .48
Table 22 – Parameters used with primitives exchanged between CSM and ASS .48

– 4 – 61158-4-13 © IEC:2007(E)
Table 23 – Primitives exchanged between CSM and ES .49
Table 24 – Parameters used with primitives exchanged between CSM and ES .49
Table 25 – Primitives exchanged between CSM and NS .49
Table 26 – Parameters used with primitives exchanged between CSM and NS .50
Table 27 – Primitives exchanged between CSM and DLM.50
Table 28 – Parameters used with primitives exchanged between CSM and DLM.50
Table 29 – Transitions of the MNs CSM .52
Table 30 – Transitions of MNs CSM at CSM_MS_NON_CYCLIC .53
Table 31 – Transitions of MNs CSM at CSM_MS_CYCLIC.56
Table 32 – Transitions of the CNs CSM .59
Table 33 – Transitions of CNs CSM at CSM_CS_NON_CYCLIC .60
Table 34 – Transitions of CNs CSM at CSM_CS_CYCLIC.62
Table 35 – CSM function table .63
Table 36 – Example of isochronous slot assignment .67
Table 37 – Primitives exchanged between ITC and DLS-user .
...


IEC 61158-4-13 ®
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 4-13: Data-link layer protocol specification – Type 13 elements

Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 4-13: Spécification des protocoles des couches de liaison de données –
Éléments de Type 13
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61158-4-13 ®
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –

Part 4-13: Data-link layer protocol specification – Type 13 elements

Réseaux de communication industriels – Spécifications des bus de terrain –

Partie 4-13: Spécification des protocoles des couches de liaison de données –

Éléments de Type 13
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XC
ICS 25.040.40; 35.100.20 ISBN 978-2-8322-1950-8

– 2 – IEC 61158-4-13:2007 © IEC 2007
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
1.1 General . 8
1.2 Specifications . 8
1.3 Procedures . 8
1.4 Applicability . 9
1.5 Conformance . 9
2 Normative references . 9
3 Terms, definitions, symbols and abbreviations . 9
3.1 Reference model terms and definitions . 9
3.2 Service convention terms and definitions . 11
3.3 Data-link service terms and definitions . 12
3.4 Symbols and abbreviations . 17
3.5 Common conventions . 18
3.6 Additional conventions . 19
4 Overview of the DL-protocol . 19
4.1 Overview . 19
4.2 General description . 19
4.3 Service assumed from the PhL . 22
4.4 DLL architecture . 23
4.5 Local parameters and variables . 24
5 General structure and encoding of PhIDUs and DLPDU and related elements of
procedure . 26
5.1 Overview . 26
5.2 MA_PDU structure and encoding . 26
5.3 Common MAC frame structure, encoding and elements of procedure . 27
5.4 Invalid DLPDU . 29
6 DLPDU-specific structure, encoding and elements of procedure . 29
6.1 General . 29
6.2 Overview . 30
6.3 Start of synchronization (SoC) . 30
6.4 PollRequest (PReq) . 32
6.5 Poll response (PRes) . 34
6.6 Start of asynchronous (SoA) . 38
6.7 Asynchronous send (ASnd) . 41
7 DLE elements of procedure . 45
7.1 Overall structure . 45
7.2 Cycle state machine (CSM) . 45
7.3 Isochronous transmission TX/RX control (ITC) . 65
7.4 Asynchronous transmission TX/RX control (ATC) . 69
7.5 Asynchronous slot scheduler (ASS) . 73
7.6 Exception signaling (ES) . 75
7.7 NMT signaling (NS) . 77
7.8 DLL management protocol . 78
Bibliography . 83

Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses . 14
Figure 2 – Slot communication network management . 20
Figure 3 – Overall flow of data frames during one cycle . 20
Figure 4 – Interaction of PhS primitives to DLE . 22
Figure 5 – Data-link layer internal architecture . 24
Figure 6 – Type 13 fieldbus DLPDU . 27
Figure 7 – State transition diagram of the MNs CSM . 51
Figure 8 – State transition diagram of MNs CSM at CSM_MS_NON_CYCLIC . 53
Figure 9 – State transition diagram of MNs CSM at CSM_MS_CYCLIC . 55
Figure 10 – State transition diagram of the CNs CSM . 59
Figure 11 – State transition diagram of CNs CSM at CSM_CS_NON_CYCLIC . 60
Figure 12 – State transition diagram of CNs CSM at CSM_CS_CYCLIC . 61
Figure 13 – Multiple slot assignment . 66
Figure 14 – State transition diagram of ITC . 68
Figure 15 – State transition diagram of ATC . 71
Figure 16 – State transition diagram of ASS . 74
Figure 17 – State transition diagram of ES . 76
Figure 18 – State transition diagram of NS. 78
Figure 19 – State transition diagram of DLM . 81

Table 1 – Data-link layer co
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.