IEC 60092-354:2003

INTERNATIONAL IEC
STANDARD
60092-354
Second edition
2003-06
Electrical installations in ships –
Part 354:
Single- and three-core power cables
with extruded solid insulation for rated voltages
6 kV (U = 7,2 kV) up to 30 kV (U = 36 kV)
m m
Installations électriques à bord des navires –
Partie 354:
Câbles d'énergie unipolaires et tripolaires
à isolant massif extrudé pour tensions
assignées 6 kV (U = 7,2 kV) à 30 kV (U = 36 kV)
m m
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (http://www.iec.ch/searchpub/cur_fut.htm)
enables you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (http://www.iec.ch/online_news/
justpub/jp_entry.htm) is also available by email. Please contact the Customer
Service Centre (see below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD
60092-354
Second edition
2003-06
Electrical installations in ships –
Part 354:
Single- and three-core power cables
with extruded solid insulation for rated voltages
6 kV (U = 7,2 kV) up to 30 kV (U = 36 kV)
m m
Installations électriques à bord des navires –
Partie 354:
Câbles d'énergie unipolaires et tripolaires
à isolant massif extrudé pour tensions
assignées 6 kV (U = 7,2 kV) à 30 kV (U = 36 kV)
m m
 IEC 2003  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
R
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

– 2 – 60092-354  IEC:2003(E)
CONTENTS
FOREWORD . 4
1 Scope and object . 6
2 Normative references. 6
3 Definitions . 7
4 Rated voltage .7
5 Types of insulating compounds. 7
6 Types of sheathing compounds. 7
7 Markings. 8
7.1 Indication of origin . 8
7.2 Continuity . 8
7.3 Durability . 8
7.4 Legibility. 8
7.5 Core identification for three-core cables . 8
8 General description. 8
9 Conductors . 9
10 Insulation. 9
10.1 Material . 9
10.2 Electrical and non-electrical characteristics of insulation. 9
10.3 Thickness of insulation . 9
11 Screening of cores.10
11.1 General .10
11.2 Conductor screening.10
11.3 Insulation screening.10
12 Metallic screen .10
12.1 Construction .10
12.2 Requirements .10
13 Cabling and filling. .10
14 Inner covering.10
14.1 General .10
14.2 Thickness of inner covering .11
15 Non-metallic sheath .11
15.1 Electrical and non-electrical characteristics of the sheathing material .11
15.2 Thickness of sheath(s).11
15.3 Colour of outer sheath .11
16 Metallic armour .12
16.1 Types of metallic armours.12
16.2 Materials and construction .12
16.3 Application of the armour.12
16.4 Dimension of armour wires and armour tapes .12
16.5 Round or flat wire armour .13
16.6 Tape armour .13
16.7 Braid wire armour .13

60092-354 © IEC:2003(E) – 3 –
17 Particular tests.13
17.1 Durability of marking.13
18 Tests on completed cables .13
18.1 Routine tests .14
18.2 Special tests.14
18.3 Type tests, electrical.14
18.4 Type test non-electrical .16
Bibliography.18
Table 1 – Nominal thickness of insulation. 9
Table 2 – Thickness of inner coverings .11
Table 3 – Diameter of armour wire .12
Table 4 – Thickness of armour tape .13
Table 5 – Power frequency test voltage.14
Table 6 – Tan δ versus voltage .15
Table 7 – Tan δ versus temperature .16
Table 8 – Impulse withstand voltages.16

– 4 – 60092-354  IEC:2003(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
ELECTRICAL INSTALLATIONS IN SHIPS –
Part 354: Single- and three-core power cables
with extruded solid insulation for rated voltages
6 kV (U = 7,2 kV) up to 30 kV (U = 36 kV)
m m
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60092-354 has been prepared by subcommittee 18A: Cables and
cable installations, of IEC technical committee 18: Electrical installations of ships and of
mobile and fixed offshore units.
This second edition cancels and replaces the first edition published in 1994 and constitutes
a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
18A/243/FDIS 18A/245/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This standard forms a part of IEC 60092 Electrical installations in ships.

60092-354 © IEC:2003(E) – 5 –
The committee has decided that the contents of this publication will remain unchanged until 2008.
At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
– 6 – 60092-354  IEC:2003(E)
ELECTRICAL INSTALLATIONS IN SHIPS –
Part 354: Single- and three-core power cables
with extruded solid insulation for rated voltages
6 kV (U = 7,2 kV) up to 30 kV (U = 36 kV)
m m
1 Scope and object
This part of IEC 60092 is applicable to shipboard and offshore power cables with extruded
solid insulation, conductor and core screening, having a voltage rating of 3,6/6 (7,2) kV,
6/10 (12) kV, 8,7/15 (17,5) kV, 12/20 (24) kV,
...