iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61466-1:1997/COR1:2007

(Corrigendum)

Corrigendum 1 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength classes and end fittings

Corrigendum 1 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength classes and end fittings

Corrigendum 1 - Isolateurs composites pour lignes aériennes de tension nominale supérieure à 1 000 V - Partie 1: Classes mécaniques et accrochages d'extrémité standards

General Information

Status
Published
Publication Date
06-Nov-2007
ICS
29.080.10 - Insulators
29.240.20 - Power transmission and distribution lines
Technical Committee
TC 36 - Insulators
Current Stage
DELPUB - Deleted Publication
Completion Date
18-May-2016
Ref Project

Relations

Corrects
IEC 61466-1:1997 - Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1: Standard strength classes and end fittings
Effective Date
05-Sep-2023
Revised
IEC 61466-1:2016 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength and end fittings
Effective Date
05-Sep-2023

Buy Standard

IEC 61466-1:1997/COR1:2007 - Corrigendum 1 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength classes and end fittings Released:11/7/2007IEC 61466-1:1997/COR1:2007 - Corrigendum 1 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength classes and end fittings Released:11/7/2007
PreviousNext
Standard
IEC 61466-1:1997/COR1:2007 - Corrigendum 1 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength classes and end fittings Released:11/7/2007
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


CEI 61466-1 IEC 61466-1
(Première édition – 1997) (First edition – 1997)
Isolateurs composites pour lignes aériennes de tension
Composite string insulator units for overhead lines
nominale supérieure à 1 000 V –
with a nominal voltage greater than 1 000 V –

Partie 1 : Classes mécaniques et accrochages
Part 1 : Standard strength classes and end fittings
d’extrémité standards
CORRIGENDUM 1
Page 38
Tableau C.1
Ajouter, sous le Tableau C.1, le nouveau texte suivant:

Afin de permettre le passage de l’axe dans les trous des branches de la chape il est permis d’avoir
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60383-1:2023(Main)
Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria

IEC 60383-1:2023 applies to insulators of ceramic material or glass for use on AC overhead power lines and overhead traction lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to insulators for use on DC overhead electric traction lines. This document applies to string insulator units, rigid overhead line insulators and to insulators of similar design when used in substations. lt does not apply to insulators forming parts of electrical apparatus or to parts used in their construction or to post insulators which are covered by IEC 60168, Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 000 V.
The object of this document is:
- to define the terms used
- to define insulator characteristics and to prescribe the conditions under which the specified values of these characteristics shall be verified
- to prescribe test methods
- to prescribe acceptance criteria.
This fifth edition cancels and replaces the fourth edition published in 1993. This edition includes the following significant technical changes with respect to the previous edition:
a) The layout of the document has been changed in order to increase readability;
b) RIV test has been added (Clause 14);
c) Impulse puncture test in air has been added (15.2);
d) Residual strength test has been added (Clause 21);
e) Zinc sleeve test has been added (Clause 28);
f) Impact test has been added (Clause 30);
g) Annex C, coatings on ceramic and glass insulators has been added;
h) Annex D, impact test has been added.

  • Standard
    125 pages
    English and French language
    sale 15% off
IEC
IEC 60433:2021(Main)
Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for AC systems - Characteristics of insulator units of the long rod type

IEC 60433:2021 is applicable to string insulator units of the long rod type with insulating parts of ceramic material intended for use in AC overhead power lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. It is also applicable to insulators of similar design, used in substations. This document is applicable to ceramic string insulator units of the long rod type, either with a clevis end fitting at both ends for coupling with a tongue, or with a socket end fitting at both ends for coupling with a pin ball. The object of this document is to prescribe specified values for electrical and mechanical characteristics, and for the principal dimensions of ceramic string insulator units of the long rod type. This fourth edition cancels and replaces the third edition published in 1998. This edition includes the following significant technical changes with respect to the previous edition:
- wording in Scope changed from "should" to "are intended to";
- new normative references added;
- title of Clause 4 amended, new Note 4 added;
- Table 1 expanded to include more specified mechanical failing loads.

  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 60305:2021(Main)
Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for AC systems - Characteristics of insulator units of the cap and pin type

IEC 60305:2021 applies to string insulator units of the cap and pin type with insulating parts of ceramic material or glass, intended for AC overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to insulators of similar design used in substations. This document applies to string insulator units of the cap and pin type either with ball and socket couplings or with clevis and tongue couplings. This document applies to string insulator units for use on overhead lines in clean areas and polluted areas. For use in areas characterized by very heavy pollution levels and for other particular or extreme environmental conditions, it may be necessary for certain dimensions to be changed and insulator units having different creepage distances, spacing and forms may be preferred (for example, flat profile, hemispherical etc.). Insulators for use on DC systems may also need different dimensions. In any case, it is applicable that the standardized mechanical characteristics of this document and coupling sizes are retained. This fifth edition cancels and replaces the fourth edition published in 1995. This edition includes the following significant technical changes with respect to the previous edition:
- wording in Scope changed from "it is recommended" to "it is applicable";
- new normative references added;
- electromechanical or mechanical failing load in Clause 4 specified;
- new figures added showing profiles.

  • Standard
    44 pages
    English language
    sale 15% off
  • Standard
    28 pages
    English and French language
    sale 15% off
IEC
IEC 60372:2020(Main)
Locking devices for ball and socket couplings of string insulator units - Dimensions and tests

IEC 60372:2020 is applicable to locking devices used with ball and socket couplings of string insulator units and used with the corresponding metal fittings standardized in IEC 60120, when they are supplied separately.The object of this document is
- to define the shapes and some standard dimensions for locking devices,
- to define the test methods for locking devices,
- to state the acceptance conditions for supply,
- to give other dimensions for guidance of manufacturing only.
This fourth edition cancels and replaces the third edition published in 1984. This edition includes the following significant technical changes with respect to the previous edition:
a. Two new designated size of couplings, 36 and 40, were introduced;
b. the relevant content of the 28B W-clip was deleted;
c. Annex A is informative, Annex B is normative, Annex C is informative.

  • Standard
    37 pages
    English and French language
    sale 15% off
IEC
IEC 60120:2020(Main)
Ball and socket couplings of string insulator units - Dimensions

IEC 60120:2020 define the dimensions of a series of standard ball and socket couplings using the standard locking devices (see IEC 60372) in order to permit the assembly of insulators or metal fittings supplied by different manufacturers. This document applies to string insulator units of the cap and pin and long rod types and their associated metal fittings. For the pin ball and the socket, dimensions apply to the finished product after any surface treatment. Extreme positions of the pin ball in the socket are given in annex. Typical examples of gauges for checking the dimensions of pin balls and sockets are given in annex.

  • Standard
    74 pages
    English and French language
    sale 15% off
IEC
IEC 60471:2020(Main)
Clevis and tongue couplings of string insulator units - Dimensions

IEC 60471:2020 applies to string insulator units of the cap and pin type and also of the long rod type as well as the fittings used with such insulators. The object of this document is to define the dimensions of a series of clevis and tongue couplings to permit the assembly of insulators or fittings supplied by different manufacturers.
This third edition cancels and replaces the second edition published in 1977. This edition includes the following significant technical changes with respect to the previous edition:
- there are no new clevis and tongue couplings;
- For the dimensions of the existing designated size of couplings that characterize the same location, the effective number of the size is unified.

  • Standard
    20 pages
    English and French language
    sale 15% off
IEC
IEC 61952-1:2019(Main)
Insulators for overhead lines - Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V - Part 1: definitions, end fittings and designations

IEC 61952-1:2019 is applicable to composite line post insulators for AC overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to line post insulators of similar design used in substations or on electric traction lines.
This document applies to line post insulators of composite type, generally with metallic couplings, with and without a base plate. It also applies to such insulators when used in complex structures. It does not apply to hollow insulators adapted for use as line post insulators
The object of this document is to specify the main dimensions of the couplings to be used on the composite line post insulators in order to permit the assembly of insulators or fittings supplied by different manufacturers and to allow, whenever practical, interchangeability with existing installations. It also specifies a standard designation system for composite line post insulators.

  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    64 pages
    English and French language
    sale 15% off
IEC
IEC 61466-2:1998/AMD2:2018(Amendment)
Amendment 2 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 2: Dimensional and electrical characteristics
  • Standard
    9 pages
    English and French language
    sale 15% off
IEC
IEC 61466-2:1998(Main)
Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 2: Dimensional and electrical characteristics

Is applicable to composite string insulators with a specified mechanical load (SML) of 40 kN and 70 kN for a.c. overhead distribution lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to insulators of similar design used in substations or on electric traction lines.

  • Standard
    13 pages
    English and French language
    sale 15% off
  • Standard
    13 pages
    English and French language
    sale 15% off
  • Standard
    41 pages
    English and French language
    sale 15% off
IEC
IEC 61466-1:2016(Main)
Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength and end fittings

IEC 61466-1:2016 is applicable to composite string insulator units for a.c. overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to insulators of similar design used in substations or on electric traction lines. This standard applies to string insulator units of composite type with ball, socket, tongue, clevis, Y-clevis or eye couplings, or a combination thereof. The object of this standard is to prescribe specified values for the mechanical characteristics of the composite string insulator units and define the main dimensions of the couplings to be used on the composite string insulator units in order to permit the assembly of insulators or fittings supplied by different manufacturers and to allow, whenever practical, interchangeability with existing installations. It also defines a standard designation system for composite string insulator units. This edition includes the following significant technical changes with respect to the previous edition:
a) Addition of strength classes reflecting UHV practice;
b) Inclusion of Corrigendum 1:2008 for Y fitting hole dimensions.

  • Standard
    46 pages
    English and French language
    sale 15% off