IEC 61784-5-14:2013

IEC 61784-5-14 ®
Edition 2.0 2013-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Profiles –
Part 5-14: Installation of fieldbuses – Installation profiles for CPF 14

Réseaux de communication industriels – Profils –
Partie 5-14: Installation des bus de terrain – Profils d'installation pour CPF 14

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 61784-5-14 ®
Edition 2.0 2013-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Profiles –

Part 5-14: Installation of fieldbuses – Installation profiles for CPF 14

Réseaux de communication industriels – Profils –

Partie 5-14: Installation des bus de terrain – Profils d'installation pour CPF 14

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 25.040.40; 35.100.40 ISBN 978-2-8322-1070-3

– 2 – 61784-5-14 © IEC:2013
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
4 CPF 14: Overview of installation profiles . 7
5 Installation profile conventions . 7
6 Conformance to installation profiles . 8
Annex A (Normative) CP 14/1, 14/2 and 14/3 (EPA) specific installation profile . 9
A.1 Installation profile scope . 9
A.2 Normative references . 9
A.3 Installation profile terms, definitions, and abbreviated terms . 9
A.3.1 Terms and definitions . 9
A.3.2 Abbreviated terms . 9
A.3.3 Conventions for installation profiles . 9
A.4 Installation planning . 9
A.4.1 General . 9
A.4.2 Planning requirements . 9
A.4.3 Network capabilities . 12
A.4.4 Selection and use of cabling components . 16
A.4.5 Cabling planning documentation . 23
A.4.6 Verification of cabling planning specification . 23
A.5 Installation implementation . 23
A.5.1 General requirements . 23
A.5.2 Cable installation . 23
A.5.3 Connector installation . 25
A.5.4 Terminator installation . 30
A.5.5 Device installation . 30
A.5.6 Coding and labelling . 30
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 30
A.5.8 As-implemented cabling documentation . 30
A.6 Installation verification and installation acceptance test . 30
A.6.1 General . 30
A.6.2 Installation verification . 30
A.6.3 Installation acceptance test . 31
A.7 Installation administration . 32
A.8 Installation maintenance and installation troubleshooting . 32

Figure 1 – Standards relationships . 6
Figure A.1 – Example of EPA explosion-proof system . 10
Figure A.2 – Earth of zener safety barrier . 11
Figure A.3 – Earth of isolated safety barrier . 11
Figure A.4 – Three stars coupled to a ring topology . 12
Figure A.5 – Five daisy chain lines coupled to a ring topology . 12

61784-5-14 © IEC:2013 – 3 –
Figure A.6 – Five sub-rings coupled to a ring topology . 13
Figure A.7 – Example of power with Ethernet . 15
Figure A.8 – Example of power supply over 0,2 A . 16
Figure A.9 – Example of power with Ethernet in linear/ring topology network . 16
Figure A.10 – Examples of earthing method for the linear/ring topologies network . 22
Figure A.11 – Pin assignment of sub-D connector . 25
Figure A.12 – Example of a 4-pin open style connector . 27
Figure A.13 – Example of a 6-pin open style connector . 28
Figure A.14 – Example of an 8-pin open style connector . 29

Table A.1 – Network characteristics for balanced cabling based on Ethernet . 14
Table A.2 – Network characteristics for optical fibre cabling . 14
Table A.3 – Information relevant to copper cable . 16
Table A.4 – Information relevant to copper cable: fixed cables . 17
Table A.5 – Information relevant to copper cable: cords . 17
Table A.6 – Information relevant to optical fibre cables . 18
Table A.7 – Connectors for balanced cabling CPs based on Ethernet . 19
Table A.8 – Optical fibre connecting hardware . 19
Table A.9 – Relationship between FOC and fibre type (CP 14/1, CP 14/2 and CP 14/3) . 20
Table A.10 – Specific connectors for balanced cabling based on Ethernet . 20
Table A.11 – Requirements of sub-D and open style connector . 21
Table A.12 – Parameters for balanced cables . 23
Table A.13 – Parameters for silica optical fibre cables . 24
Table A.14 – Parameters for POF optical fibre cables . 24
Table A.15 – Parameters for hard cladded silica optical fibre cables . 24
Table A.16 – Signal lines assignment of sub-D connector . 26
Table A.17 – Signal lines assignment of sub-D connector for 1 000 Base Ethernet . 26
Table A.18 – Signal lines assignment for a 4-pin open style connector . 27
Table A.19 – Signal lines assignment for a 6-pin open style connector . 28
Table A.20 – Signal lines assignment for an 8-pin open style connector(10/100 Mbps) . 29
Table A.21 – Signal lines assignment for an 8-pin open style connector(1 000 Mbit/s) . 30

– 4 – 61784-5-14 © IEC:2013
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
PROFILES –
Part 5-14: Installation of fieldbuses –
Installation profiles for CPF 14

FOREWORD
1) The International Electrotechnical Commission
...