iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60317-13:1990/AMD2:1997

(Amendment)

Amendment 2 - Specifications for particular types of winding wires. Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200

Amendment 2 - Specifications for particular types of winding wires. Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200

This amendment 2 is valid for the following parts of the IEC 60317: Part 1 (1990), Part 7 (1990), Part 8 (1990), Part 11 (1990), Part 13 (1990) and Part 25 (1990).

Amendement 2 - Spécifications pour types particuliers de fils de bobinage. Partie 13: Fil de section circulaire en cuivre émaillé avec polyester ou polyesterimide et avec surcouche polyamide-imide, classe 200

Cet amendement 2 est valable pour les parties suivantes de la CEI 60317: Partie 1 (1990), Partie 7 (1990), Partie 8 (1990), Partie 11 (1990), Partie 13 (1990) et Partie 25 (1990).

General Information

Status
Published
Publication Date
21-Dec-1997
ICS
11.040.10 - Anaesthetic, respiratory and reanimation equipment
29.060.10 - Wires
Technical Committee
TC 55 - Winding wires
Current Stage
DELPUB - Deleted Publication
Completion Date
18-Mar-2010
Ref Project

Relations

Amends
IEC 60317-13:1990 - Specifications for particular types of winding wires. Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200
Effective Date
05-Sep-2023
Revised
IEC 60317-13:2010 - Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
Effective Date
05-Sep-2023

Buy Standard

IEC 60317-13:1990/AMD2:1997 - Amendment 2 - Specifications for particular types of winding wires. Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200 Released:12/22/1997 Isbn:2831841186IEC 60317-13:1990/AMD2:1997 - Amendment 2 - Specifications for particular types of winding wires. Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200 Released:12/22/1997 Isbn:2831841186
PreviousNext
Standard
IEC 60317-13:1990/AMD2:1997 - Amendment 2 - Specifications for particular types of winding wires. Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200 Released:12/22/1997 Isbn:2831841186
English and French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NORME CEI
INTERNATIONALE
IEC
INTERNATIONAL
STANDARD
AMENDEMENT 2
AMENDMENT 2
1997-12
Amendement 2 aux parties suivantes de la série
de la CEI 60317
Spécifications pour types particuliers
de fils de bobinage –
Partie 1 (1990), Partie 7 (1990), Partie 8 (1990),
Partie 11 (1990), Partie 13 (1990), Partie 25 (1990)
Amendment 2 to the following parts of the
IEC 60317 series
Specifications for particular types
of winding wires –
Part 1 (1990), Part 7 (1990), Part 8 (1990),
Part 11 (1990), Part 13 (1990), Part 25 (1990)

 IEC 1997 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission B
PRICE CODE
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – Amend. 2 © CEI:1997 aux
60317-1, -7, -8, -11, -13, -25

AVANT-PROPOS
Le présent amendement a été établi par le comité d'études 55 de la CEI: Fils de bobinage.

Le texte du présent amendement est issu des documents suivants:

FDIS Rapport de vote
55/560/FDIS 55/604/RVD
Le rapport de vote indiqué d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60317-13:1990/AMD1:1997(Amendment)
Amendment 1 - Specifications for particular types of winding wires. Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200

This standard establishes safety requirements for baby incubators with the view to minimizing hazards to the patient and user. It also specifies tests by which compliance requirements can be verified. It does not apply to transport incubators nor infant radiant warmers which are covered in other publications.

  • Standard
    3 pages
    English and French language
    sale 15% off
IEC
ISO 80601-2-79:2018(Main)
Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment

ISO 80601-2-79:2018 This document applies to the basic safety and essential performance of ventilatory support equipment, as defined in 201.3.205, for ventilatory impairment, as defined in 201.3.202, hereafter also referred to as me equipment, in combination with its accessories:
— intended for use in the home healthcare environment;
— intended for use by a lay operator; and
— intended for use with patients who have ventilatory impairment, the most fragile of these patients, would not likely experience injury with the loss of this artificial ventilation; and
— not intended for patients who are dependent on artificial ventilation for their immediate life support.
EXAMPLE 1 Patients with mild to moderate chronic obstructive pulmonary disease (COPD).
NOTE 1 In the home healthcare environment, the supply mains is often not reliable.
NOTE 2 Such ventilatory support equipment can also be used in non-critical care applications of professional health care facilities.
This document is also applicable to those accessories intended by their manufacturer to be connected to the breathing system of ventilatory support equipment for ventilatory impairment, where the characteristics of those accessories can affect the basic safety or essential performance of the ventilatory support equipment for ventilatory impairment.
EXAMPLE 2 Breathing sets, connectors, water traps, expiratory valve, humidifier, breathing system filter, external electrical power source, distributed alarm system.
If a clause or subclause is specifically intended to be applicable to me equipment only, or to me systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to me equipment and to me systems, as relevant.
Hazards inherent in the intended physiological function of me equipment or me systems within the scope of this document are not covered by specific requirements in this document except in IEC 60601‑1:2005+AMD1:2012, 7.2.13 and 8.4.1.
NOTE 3 Additional information can be found in IEC 60601‑1:2005+AMD1:2012, 4.2.
This document does not specify the requirements for:
— ventilators or accessories for ventilator-dependent patients intended for critical care applications, which are given in ISO 80601‑2‑12;
— ventilators or accessories intended for anaesthetic applications, which are given in ISO 80601‑2‑13[4];
— ventilators or accessories intended for the emergency medical services environment, which are given in ISO 80601‑2‑84 [5] [1], the future replacement for ISO 10651‑3[6];
— ventilators or accessories intended for ventilator-dependent patients in the home healthcare environment, which are given in ISO 80601‑2‑72;
— ventilatory support equipment or accessories intended for ventilatory insufficiency, which are given in ISO 80601‑2‑80[1];
— sleep apnoea therapy me equipment, which are given in ISO 80601‑2‑70[7];
— continuous positive airway pressure (CPAP) me equipment;
— high-frequency jet ventilators (HFJVs);
— high-frequency oscillatory ventilators (HFOVs)[8];
— oxygen therapy constant flow me equipment;
— cuirass or "iron-lung" ventilation equipment.
This document is a document in the IEC 60601 and IEC/ISO 80601 series of documents.
[1] Under preparation. Stage at the time of publication: ISO/DIS 80601-2-84:2017.

  • Standard
    82 pages
    English language
    sale 15% off
  • Standard
    82 pages
    French language
    sale 15% off
IEC
IEC 60317-13:1990/AMD1:1997(Amendment)
Amendment 1 - Specifications for particular types of winding wires. Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200

This standard establishes safety requirements for baby incubators with the view to minimizing hazards to the patient and user. It also specifies tests by which compliance requirements can be verified. It does not apply to transport incubators nor infant radiant warmers which are covered in other publications.

  • Standard
    3 pages
    English and French language
    sale 15% off
IEC
IEC/IEEE 62582-1:2024(Main)
Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General

IEC/IEEE 62582-1:2024 is available as IEC/IEEE 62582-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC/IEEE 62582-1:2024 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition monitoring in electrical equipment important to safety of nuclear power plants. It also includes requirements which are common to all methods. The procedures defined in IEC/IEEE 62582 are intended for detailed condition monitoring.
IEC/IEEE 62582 specifies condition monitoring methods in sufficient detail to enhance the accuracy and repeatability, and provide standard formats for reporting the results. The methods specified are applicable to electrical equipment containing polymeric materials. Some methods are especially designed for the measurement of condition of a limited range of equipment whilst others can be applied to all types of equipment for which the polymeric parts are accessible.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 15% off
IEC
IEC/IEEE 63332-387:2024(Main)
Nuclear facilities - Electrical power systems - Diesel generator units applied as standby power sources

IEC/IEEE 63332-387:2024 defines the criteria for the application and testing of diesel generator (DG) units used as safety class standby power supplies in nuclear facilities. In general, the standard applies to new nuclear facilities as well as for upgrading or back-fitting of existing facilities. Existing facilities can voluntarily adopt the requirements to enhance the performance capabilities and reliability of the installed DG units. The standard can be used in applications where highly reliable onsite alternating current (AC) power source is required to maintain plant safety following an event with potential loss of offsite power for an extended duration.
This document provides the principal design criteria, the design features, testing, and qualification requirements for the individual DG units that enable them to meet their functional requirements as a part of the standby power supply under the conditions produced by the design basis events catalogued in the plant safety analysis.

  • Standard
    139 pages
    English and French language
    sale 15% off
IEC
IEC TR 63368:2024(Main)
Control and protection systems for high-voltage direct current (HVDC) power transmission systems - Off-site real-time simulation testing

IEC TR 63368:2024 provides guidance on off-site real-time simulation tests of control and protection (C&P) systems for HVDC power transmission systems. The off-site real-time simulation tests are carried out after the testing of C&P devices and prior to on-site system tests.
This document covers point-to-point, back-to-back, and multi-terminal HVDC systems of line commutated converters (LCC), voltage-sourced converters (VSC) and hybrid HVDC technologies.
In order to provide practical guidance for the functional performance tests of HVDC power transmission systems, this document covers the test environment, the contents and methods of functional performance tests, and the test report.

  • Technical report
    30 pages
    English language
    sale 15% off
IEC
IEC 62899-301-3:2024(Main)
Printed Electronics - Part 301-3: Equipment - Contact printing - Rigid master - Method to measure the shape errors of printing plate rollers

IEC 62899-301-3:2024 defines measurement terms and methods related to the shape errors of printing plate rollers. Measurement terms include radius, total run-out, and three kinds of shape errors of printing plate rollers that are axial deviation, radial deviation, and cross-sectional deviation. The remaining shape error excluding the three errors mentioned above is defined as a residual shape error.
This document applies to printing plate rollers with or without patterns while excluding the pattern area for the measurement.

  • Standard
    24 pages
    English language
    sale 15% off
IEC
IEC TR 63484:2024(Main)
Guidance on fungus resistance of optical fibre cables

IEC TR 63484:2024 information about fungal growth on the outer sheath of optical fibre cables and on the inner components of the cable. It also provides guidance for specifying fungus resistance performance of optical cable outer sheath and internal cable components, including recommendations for fungus resistance test method as well as evaluation after test.
This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to hybrid telecommunication cables having a combination of both optical fibres and electrical conductors.
Since conditions suitable for fungal growth include high relative humidity and a warm atmosphere, the document is applicable to optical cables intended for transportation, storage and use under such environment over certain period, for instance, some days at least.

  • Technical report
    15 pages
    English language
    sale 15% off
IEC
IEC TS 63331:2024(Main)
Electric dishwashers for household use - Methods for measuring the microbiological efficacy of the dishwashing process

IEC TS 63331:2024 applies to electric dishwashers for household and similar use that are supplied with hot and/or cold water.
This document deals with measurement procedures regarding the reduction of microbial contamination resulting from the use of electric dishwashers for household and similar use.
This document specifies methods that enable reproducible measurements. These derived measurement results can only be used for a relative statement. Absolute statements, i.e. health-related claims or conclusions about prevention or treatment of a disease or health improvement, are reserved for explicit regulatory action after a medical assessment.
This document does not apply to appliances intended to be used in medical, veterinary, or pharmaceutical applications.
This document does not address sanitization, disinfection or sterilization measures.
The dishwashing process is a complex operation consisting of cleaning dish items and cleaning the dishwasher itself. This document only focusses on the dish items to be cleaned.

  • Technical specification
    32 pages
    English language
    sale 15% off
IEC
IEC 63145-22-20:2024/COR1:2024(Corrigendum)
Corrigendum 1 - Eyewear display - Part 22-20: Specific measurement methods for AR type - Image quality

IEC 63145-22-20:2024 specifies the standard measuring conditions and measurement methods for determining the image quality of augmented reality (AR) type eyewear displays. This document applies to see-through type (AR glasses) eyewear displays using virtual image optics.
See-through type displays (VR glasses), contact lens-type displays, and retina direct projection displays are out of the scope of this document.

  • Standard
    1 page
    English language
    sale 15% off