Amendment 1 - Electric cables - Spark-test method

Amendement 1 - Câbles électriques - Méthode d'essai au défilement à sec (sparker)

General Information

Status
Published
Publication Date
26-Nov-2013
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
31-Dec-2013
Completion Date
27-Nov-2013
Ref Project

Relations

Buy Standard

Standard
IEC 62230:2006/AMD1:2013 - Amendment 1 - Electric cables - Spark-test method
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 62230 ®
Edition 1.0 2013-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Electric cables –Spark-test method

Câbles électriques – Méthode d'essai au défilement à sec (sparker)

IEC 62230:2006/A1:2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 62230 ®
Edition 1.0 2013-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Electric cables –Spark-test method

Câbles électriques – Méthode d'essai au défilement à sec (sparker)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX E
ICS 29.060.20 ISBN 978-2-8322-1207-3

– 2 – 62230 Amend. 1  IEC:2013
FOREWORD
This amendment has been prepared by IEC technical committee 20: Electric Cables.
The text of this amendment is based on the following documents:
FDIS Report on voting
20/1462/FDIS 20/1470/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
Contents
Replace the existing title of Annex A by the following:
Annex A (normative) Minimum voltage levels
Replace the existing title of Table A.1 by the following:
Table A.1 – Minimum spark-test voltages for cables having rated voltage (U ) between 300 V
and 3 000 V
1 Scope
Replace, in the second sentence of the first paragraph, the term "single core cables" by
"single-core cables".
3 Procedure
Replace the existing third paragraph by the following:
When used as an alternative to a voltage test in water, the test shall be restricted to layer
thicknesses not greater than 2,0 mm unless otherwise specified in the cable standard. Only
the a.c. or d.c. voltage waveforms shall be used.
Replace, in the fifth paragraph, the phrase "recommended voltages" by "minimum voltages".

62230 Amend. 1  IEC:2013 – 3 –
5 Test voltages
Replace the existing fourth paragraph by the following:
Where a cable standard states the test voltages, these shall be used. In the absence of such
specified voltages, the test voltages given in Annex A shall be used.
6 Sensitivity
6.1 AC, d.c. and h.f. voltages
Delete the second sentence of the first paragraph.
Replace the existing text of the second paragraph with the following:
Equipment shall be capable of detecting the faults described in 6.1.1 and 6.1.2 and shall be
verified according to 6.3.
6.1.1 AC and h.f.
Replace the beginning of the existing text ("The typical fault is defined…") as follows:
A fault is defined ….
6.1.2 DC
Replace the beginning of the existing text ("The typical fault is defined…") as follows:
A fault is defined ….
6.2 Pulsed voltages
Delete, in the first paragraph, the word "typical".
Replace the beginning of the second paragraph ("The typical fault is defined…") as follows:
A fault is defined ….
– 4 – 62230 Amend. 1  IEC:2013
Annex A – Recommended minimum voltage levels
Replace the existing title and text of the annex as follows:
Annex A
(normative)
Minimum voltage levels
A.1 General
The test voltages given in Table A.1 shall be used, unless the cable standard specifies
alternative test voltages.
The details of the test method are as given in the main section of this standard.
A.2 Test voltages
A.2.1 General
The voltages given in Annex A are the minimum levels to be used to locate defects in the
layer under test. These levels shall only be reduced if specified in the relevant cable standard.
NOTE Some countries have established higher test levels in their national standards.
A.2.2 Contact electrodes
The high-voltage supply to the test electrode may be a.c., d.c., h.f. or pulsed voltage, as
specified in Clause 2 and 4.2.
Table A.1 gives test voltages for cables having a rated voltage (U ) between 300 V and
3 000 V.
62230 Amend. 1  IEC:2013 – 5 –
Table A.1 – Minimum spark-test voltages for cables having rated
voltage (U ) between 300 V and 3 000 V
Tabulated radial thickness of
Test voltage
layer under test
kV
mm
a a a
Above Up to and a.c. d.c. h.f. Pulse
including
0 0,25 3 5 4 5
0,25 0,50 5 7 6 7
0,50
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.