IEC TR 62629-51-1:2020
(Main)3D display devices - Part 51-1: Generic introduction of aerial display
3D display devices - Part 51-1: Generic introduction of aerial display
IEC TR 62629-51-1:2020 (E), which is a Technical Report, provides general information for the standardization of aerial displays. This document includes an overview of the technology, critical performance characteristics, issues of optical measurements, and other information.
General Information
This May Also Interest You
IEC 62595-2-4:2020(E) specifies the electro-optical measuring methods of laser modules with multiple laser devices and an optical output for various displays and display lighting applications which require photometric and colorimetric measurements, covering the wavelength range of 380 nm to 780 nm. The module has multiple laser devices such as edge-emitting laser diodes (LDs), vertical cavity surface-emitting laser diodes (VCSELs), or photon up-conversion laser devices including second-harmonic generation (SHG). The module has an optical output such as an optical fibre, waveguide, light guide, lens unit, or other optics, emitting a laser beam combining the output of the multiple laser devices.
- Standard73 pagesEnglish languagesale 15% off
IEC 62977-2-2:2020(E) specifies standard measurement conditions and measuring methods for determining the optical characteristics of electronic displays under indoor and outdoor illumination conditions. Standard illumination geometries are specified and the reflection properties of flat screens are determined under those conditions. Reference illumination levels and spectra are used to estimate the photometric and colorimetric characteristics of electronic displays under the same conditions. These methods apply to emissive, transmissive, and reflective displays, or combinations thereof, that render real 2D images on a flat screen.
- Standard68 pagesEnglish languagesale 15% off
IEC TR 62595-1-4:2020(E), which is a Technical Report, provides general information for judging the necessity of future standardization of glass light guide plates for display lighting units, which include backlight units for transmissive displays such as LCDs, and frontlight units for reflective displays.
- Technical report24 pagesEnglish languagesale 15% off
IEC 62906-5-6:2020 (E) specifies the standard measurement conditions and measuring methods for determining the optical performance of a projection screen in terms of its photometric characteristics, including screen gain and speckle contrast, from different viewing directions. These methods are only applied for the case in which the projection screen and a laser projector are integrated and used with a fixed configuration as a set to create a real image. Both front and rear projection screens, with a flat surface, are included. This document excludes projection screens which are classified as optically see-through screens, including head-up displays.
- Standard22 pagesEnglish languagesale 15% off
IEC 62341-5-3:2019 is available as IEC 62341-5-3:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62341-5-3:2019 specifies the standard measuring methods for determining the image sticking and lifetime of organic light emitting diode (OLED) display panels and modules, except finalized display products for end customers, such as TV sets, monitor sets and mobile phones. The measuring method for the lifetime mainly applies to modules.
This edition includes the following significant technical changes with respect to the previous edition:
a) the measurement vehicle for lifetime is only for the module;
b) the measurement method for monitor or TV devices is modified;
c) the digital signage display is included as an example of OLED devices;
d) the measurement method with HDR (high dynamic range) for image sticking is added;
e) the analysis method with CIEDE 2000 is added for image sticking;
f) the information method for evaluating image sticking is modified.
- Standard26 pagesEnglish languagesale 15% off
- Standard63 pagesEnglish languagesale 15% off
IEC TS 62341-6-5:2019 (E) specifies the standard measurement conditions and dynamic range properties for OLED display panels and modules. More precisely, this document focuses on the specific aspects of the dynamic range properties.
- Technical specification16 pagesEnglish languagesale 15% off
IEC TR 62595-1-3:2019 (E) focuses on common issues of light emission such as spatial uniformity of luminance and colour, and angular distribution of luminance and colour, from lighting units with arbitrary shapes like flexible lighting sources (FLSs). This document provides a model of light emission from a curved FLS and of light measurement on a curved FLS. Because the development of flexible liquid crystal panels is in progress (see the notes), the intent of this document is to provide guidance for the development of future measurement standards. This document is applicable to FLSs either as light sources, products or elements with arbitrary shapes of geometrical curvature having different spectral and spatial characteristics of light emission.
NOTE 1 Almost 20 years ago plastic LCDs were developed and used in a few applications.
NOTE 2 Flexible BLUs have been used for bendable LC panels in recent years.
NOTE 3 Recent transmissive and transflective flexible LCs require flexible BLUs.
- Technical report19 pagesEnglish languagesale 15% off
IEC 62629-12-2:2019 specifies the measuring methods of motion artifacts for stereoscopic displays using glasses. This document is applicable to stereoscopic displays using glasses, which consist of transmissive type active matrix liquid crystal display modules (without a post image processing).
- Standard47 pagesEnglish and French languagesale 15% off
IEC 62341-5-2:2019 is available as IEC 62341-5-2:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62341-5-2:2019 defines test methods for evaluating the mechanical endurance quality of organic light emitting diode (OLED) display panels and modules or their packaged form for transportation. It takes into account, wherever possible, the environmental test methods outlined in IEC 60068 (all parts). The object of this document is to establish uniform preferred test methods for judging the mechanical endurance properties of OLED display devices.
This edition includes the following significant technical changes with respect to the previous edition:
- Vibration and shock tests for large displays (for example, TVs and monitors) are added.
- Standard29 pagesEnglish languagesale 15% off
- Standard58 pagesEnglish languagesale 15% off
IEC TS 62977-3-1:2019(E) specifies the evaluation method of the viewing direction characteristics of electronic display devices under dark-room conditions. More specifically, this document focuses on the evaluation of the viewing direction characteristics based on colour difference.
This document applies to colour matrix displays, which are based on transmissive or emissive technologies.
- Technical specification31 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.