iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC TR 61340-1:2012/AMD1:2020

(Amendment)

Amendment 1 - Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements

Amendment 1 - Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements

General Information

Status
Published
Publication Date
09-Jun-2020
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
17.220.99 - Other standards related to electricity and magnetism
29.020 - Electrical engineering in general
Technical Committee
TC 101 - Electrostatics
Drafting Committee
MT 8 - TC 101/MT 8
Current Stage
PPUB - Publication issued
Start Date
17-Jun-2020
Completion Date
10-Jun-2020
Ref Project

Relations

Amends
IEC TR 61340-1:2012 - Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
Effective Date
05-Sep-2023

Buy Standard

IEC TR 61340-1:2012/AMD1:2020 - Amendment 1 - Electrostatics - Part 1: Electrostatic phenomena - Principles and measurementsIEC TR 61340-1:2012/AMD1:2020 - Amendment 1 - Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
PreviousNext
Technical report
IEC TR 61340-1:2012/AMD1:2020 - Amendment 1 - Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC TR 61340-1 ®
Edition 1.0 2020-06
TECHNICAL
REPORT
AMENDMENT 1
Electrostatics –
Part 1: Electrostatic phenomena – Principles and measurements

IEC TR 61340-1:2012-06/AMD1:2020-06(en)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
IEC TR 61340-1 ®
Edition 1.0 2020-06
TECHNICAL
REPORT
AMENDMENT 1
Electrostatics –
Part 1: Electrostatic phenomena – Principles and measurements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 17.220.99; 29.020 ISBN 978-2-8322-8394-3

– 2 – IEC TR 61340-1:2012/AMD1:2020
© IEC 2020
FOREWORD
This amendment has been prepared by IEC technical committee 101: Electrostatics.
The text of this amendment is based on the following documents:
Draft TR Report on voting
101/598/DTR 101/604/RVDTR
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
2 Normative references
Add the following new references:
IEC TS 60079-32-1:2013, Explosive atmospheres – Part 32-1: Electrostatic hazards, guidance
IEC 60079-32-2, Explosive atmospheres – Part 32-2: Electrostatic hazards – Tests
IEC 61340-6-1, Electrostatics – Part 6-1: Electrostatic control for healthcare – General
requirements for facilities
ISO/IEC 80079-20-2, Explosive atmospheres – Part 20-2: Material characteristics –
Combustible dusts test methods
ISO 80079-36:2016, Explosive atmospheres – Part 36: Non-electrical equipment for explosive
atmospheres – Basic method and requirements
Replace the reference to IEC 61340-5-2 with the following reference:
IEC TR 61340-5-2, Electrostatics – Part 5-2: Protection of electronic devices from
electrostatic phenomena – User guide
Delete the references to IEC 61241-2-3 and BS EN 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC TR 61340-5-5:2018(Main)
Electrostatics - Part 5-5: Protection of electronic devices from electrostatic phenomena - Packaging systems used in electronic manufacturing

IEC TR 61340-5-5:2018(E) discusses packaging material requirements for electrostatic discharge sensitive items (ESDS) as well as non–ESDS which can apply to packaging materials such as embossed carrier tape, trays, tubes (stick magazines), rails and others used in back end line processing and parts handling where test methods described in other standards are, for the most part, inadequate. Issues related to electrostatic charge generation, electrostatic attraction and repulsion are included. The recommendations and discussions within this document can also be applicable to other types of packaging that cannot be evaluated by other means.
This document discusses the issues related to
1) technical considerations for packaging material selection and packaging system design,
2) packaging material specifications for electrostatic control,
3) existing test methods and their limitations for packaging materials,
4) suggestions for the evaluation of small dimension packaging materials, and
5) industry common practices.

  • Technical report
    34 pages
    English language
    sale 15% off
IEC
IEC TR 61340-5-2:2018(Main)
Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide

IEC TR 61340-5-2:2018 is available as IEC TR 61340-5-2:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 61340-5-2:2018, which has been developed to support IEC 61340-5-1, applies to activities that: manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 V HBM, 200 V CDM and 35 V for isolated conductors. Additional control elements or adjusted limits can be applicable for ESDS with lower withstand voltages. This second edition of IEC TR 61340-5-2 has been modified to provide guidance for users of IEC 61340-5-1:2016. The text has been arranged to follow the requirements of IEC 61340‑5‑1:2016 as closely as possible as well as providing specific guidance on each of the requirements of IEC 61340-5-1:2016.

  • Technical report
    93 pages
    English language
    sale 15% off
  • Technical report
    194 pages
    English language
    sale 15% off
IEC
IEC 61340-2-3:2016(Main)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation

IEC 61340-2-3:2016 is available as IEC 61340-2-3:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61340-2-3:2016 describes test methods for the determination of the electrical resistance and resistivity of solid materials used to avoid electrostatic charge accumulation, in which the measured resistance is in the range 10K Ohm to 1T Ohm. It takes account of existing IEC/ISO standards and other published information, and gives recommendations and guidelines on the appropriate method. This edition includes the following significant technical changes with respect to the previous edition:
a) a distinction has been introduced between instrumentation used for laboratory evaluations, instrumentation used for acceptance testing and instrumentation used for compliance verification (periodic testing);
b) an alternative electrode assembly is described, which can be used on non-planar products or when the dimensions of the product under test are too small to allow the larger electrode assembly to be used;
c) the formulae for calculating surface and volume resistivity have been modified to correspond with common industry practice in the main areas of application for the IEC 61340 series.
The contents of the corrigendum of July 2023 have been included in this copy.

  • Standard
    88 pages
    English language
    sale 15% off
  • Standard
    56 pages
    English and French language
    sale 15% off
IEC
IEC 61340-5-1:2016(Main)
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements

IEC 61340-5-1:2016 is available as IEC 61340-5-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61340-5-1:2016 applies to activities that: manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 V HBM, 200 V CDM and 35 V for isolated conductors. ESDS with lower withstand voltages may require additional control elements or adjusted limits. Processes designed to handle items that have lower ESD withstand voltage(s) can still claim compliance to this standard. This standard provides the requirements for an ESD control program. IEC TR 61340-5-2 [9] provides guidance on the implementation of this standard. This standard does not apply to electrically initiated explosive devices, flammable liquids, gases and powders. The purpose of this standard is to provide the administrative and technical requirements for establishing, implementing and maintaining an ESD control program (hereinafter referred to as the "program"). This edition includes the following significant technical changes with respect to the previous edition:
a) Technical requirements were changed to align IEC 61340-5-1 with other industry ESD standards;
b) Reference documents were updated to reflect newly released IEC standards;
c) A section on product qualification was added;
d) Table 4 was deleted and detailed packaging requirements were deferred to IEC 61340-5-3;
e) Clause A.1 was removed and is now included in IEC 61340-4-6.
The contents of the corrigendum of May 2017 have been included in this copy.

  • Standard
    63 pages
    English language
    sale 15% off
  • Standard
    40 pages
    English and French language
    sale 15% off
IEC
IEC 61340-2-1:2015(Main)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge

IEC 61340-2-1:2015 describes test methods for measuring the rate of dissipation of static charge of insulating and static dissipative materials and products. It includes a generic description of test methods and detailed test procedures for specific applications. The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and may not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, e.g. textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. The charged plate method may not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces. In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. This edition includes the following significant technical changes with respect to the previous edition:
a) the first edition supported requirements in IEC TR 61340-5-1, but with the revision of IEC TR 61340-5-1 into an International Standard, this support is no longer required; references to IEC 61340-5-1 have been removed;
b) the introduction gives additional information on when charge decay time measurements are appropriate, and the applications for which each of the two test methods are best suited;
c) procedures for performance verification of measuring instruments for the corona charging method have been added. It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    48 pages
    English language
    sale 15% off
  • Standard
    46 pages
    English and French language
    sale 15% off
  • Standard
    100 pages
    English and French language
    sale 15% off
IEC
IEC 61340-5-3:2015(Main)
Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices

IEC 61340-5-3:2015 defines the ESD protective packaging properties needed to protect electrostatic discharge sensitive devices (ESDS) through all phases of production, rework/maintenance, transport and storage. Test methods are referenced to evaluate packaging and packaging materials for these product and material properties. Performance limits are provided. This standard does not address protection from electromagnetic interference (EMI), electromagnetic pulsing (EMP) or protection of volatile materials. This edition includes the following significant technical changes with respect to the previous edition:
a) removal of all references to ANSI/ESD STM11.13, replaced by normative reference IEC 61340-4-10;
b) additional notes added to Table 1;
c) addition of a new Table 3 related to the "ESD classification symbol" and the "primary function code".

  • Standard
    42 pages
    English and French language
    sale 15% off
IEC
IEC TS 61340-4-2:2013(Main)
Electrostatics - Part 4-2: Standard test methods for specific applications - Electrostatic properties of garments

IEC/TS 61340-4-2:2013 describes test methods and procedures that can be used to evaluate the electrostatic charging and discharging propensity, field suppression properties and charge dissipation properties of garments and materials from which garments are constructed.

  • Technical specification
    102 pages
    English and French language
    sale 15% off
IEC
IEC TR 61340-1:2012(Main)
Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements

IEC/TR 61340-1:2012 describes the fundamental principles of electrostatic phenomena including charge generation, retention and dissipation and electrostatic discharges. Methods for measuring electrostatic phenomena and related properties of materials are described in a general way. Hazards and problems associated with electrostatic phenomena and principles of their control are outlined. Useful applications of electrostatic effects are summarized. The purpose of this technical report is to serve as a reference for the development of electrostatics related standards, and to provide guidance for their end-users. The contents of the corrigendum of March 2013 and the corrigendum 2 of December 2017 have been included in this copy.

  • Technical report
    82 pages
    English language
    sale 15% off
  • Technical report
    86 pages
    English and French language
    sale 15% off
IEC
IEC TR 61340-2-2:2000(Main)
Electrostatics - Part 2-2: Measurement methods - Measurement of chargeability

Describes the equipment, arrangement and procedures for measurement of electrostatic charge caused by contact and relative motion between materials and presents examples of model experiment to simulate practical processes.

  • Technical report
    31 pages
    English and French language
    sale 15% off
IEC
IEC TR 61340-5-5:2018(Main)
Electrostatics - Part 5-5: Protection of electronic devices from electrostatic phenomena - Packaging systems used in electronic manufacturing

IEC TR 61340-5-5:2018(E) discusses packaging material requirements for electrostatic discharge sensitive items (ESDS) as well as non–ESDS which can apply to packaging materials such as embossed carrier tape, trays, tubes (stick magazines), rails and others used in back end line processing and parts handling where test methods described in other standards are, for the most part, inadequate. Issues related to electrostatic charge generation, electrostatic attraction and repulsion are included. The recommendations and discussions within this document can also be applicable to other types of packaging that cannot be evaluated by other means.
This document discusses the issues related to
1) technical considerations for packaging material selection and packaging system design,
2) packaging material specifications for electrostatic control,
3) existing test methods and their limitations for packaging materials,
4) suggestions for the evaluation of small dimension packaging materials, and
5) industry common practices.

  • Technical report
    34 pages
    English language
    sale 15% off