Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices

IEC 63373:2022 In general, dynamic ON-resistance testing is a measure of charge trapping phenomena in GaN power transistors. IEC 63373:2022 provides guidelines for testing dynamic ON-resistance of GaN lateral power transistor solutions. The test methods can be applied to the following:
a) GaN enhancement and depletion-mode discrete power devices;
b) GaN integrated power solutions;
c) the above in wafer and package levels.
The prescribed test methods can be used for device characterization, production testing, reliability evaluations and application assessments of GaN power conversion devices. This document is not intended to cover the underlying mechanisms of dynamic ON-resistance and its symbolic representation for product specifications.

Lignes directrices pour les méthodes d’essai de résistance dynamique à l’état passant des dispositifs de conversion de puissance fondés sur les HEMT en GaN

IEC 63373:2022 En règle générale, l’essai de résistance dynamique à l’état passant est une mesure des phénomènes de piégeage de charge dans les transistors de puissance en GaN. L'IEC 63373:2022 donne des lignes directrices pour l’essai de résistance dynamique à l’état passant des solutions de transistors de puissance latéraux en GaN. Les méthodes d’essai peuvent être appliquées aux éléments suivants:
a) dispositifs de puissance discrets en GaN à mode d’enrichissement et de déplétion;
b) solutions de puissance intégrées en GaN;
c) dispositifs et solutions ci-dessus au niveau des plaquettes et des boîtiers.
Les méthodes d’essai spécifiées peuvent être utilisées pour la caractérisation des dispositifs, les essais de production, les évaluations de fiabilité et les évaluations de l’application des dispositifs de conversion de puissance en GaN. Le présent document n’est pas destiné à couvrir les mécanismes sous-jacents de la résistance dynamique à l’état passant et sa représentation symbolique pour les spécifications du produit.

General Information

Status
Published
Publication Date
09-Feb-2022
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
10-Mar-2022
Completion Date
10-Feb-2022
Ref Project

Buy Standard

Standard
IEC 63373:2022 - Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices
English and French language
28 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 63373 ®
Edition 1.0 2022-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Dynamic on-resistance test method guidelines for GaN HEMT based power
conversion devices
Lignes directrices pour les méthodes d’essai de résistance dynamique à l’état
passant des dispositifs de conversion de puissance fondés sur les HEMT en
GaN
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 19 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 300 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
19 langues additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 63373 ®
Edition 1.0 2022-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Dynamic on-resistance test method guidelines for GaN HEMT based power

conversion devices
Lignes directrices pour les méthodes d’essai de résistance dynamique à l’état

passant des dispositifs de conversion de puissance fondés sur les HEMT en

GaN
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.080.99 ISBN 978-2-8322-1076-6

– 2 – IEC 63373:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviated terms . 6
3.1 Terms and definitions . 6
3.2 Symbols and abbreviated terms . 6
4 Test circuits and waveforms . 7
4.1 General . 7
4.2 Inductive and resistive switching methods . 7
4.3 Pulsed current-voltage (I-V) method . 10
5 Requirements . 12
Bibliography . 14

Figure 1 – Inductive-resistive load “double-pulse” test circuit for hard-switching
evaluation . 8
Figure 2 – Depiction of the hard-switching “double-pulse” test circuit (showing its
similarity to a boost converter) . 8
Figure 3 – Simplified flowchart for inductive and/or resistive switching based dynamic
on-resistance test . 9
Figure 4 – Representative continuous-pulse hard-switching waveforms for measuring
dynamic on-resistance using the test circuits in Figure 1 and Figure 2 . 10
Figure 5 – Example test circuit for soft-switching on-resistance measurement (the gate
and drain terminals are pulsed with independent voltage signals) . 10
Figure 6 – Simplified flowchart for soft switching based dynamic on-resistance test . 11
Figure 7 – Illustrative timing diagram for measuring dynamic ON-resistance under
OFF-state stress in soft-switching mode . 12

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DYNAMIC ON-RESISTANCE TEST METHOD GUIDELINES
FOR GaN HEMT BASED POWER CONVERSION DEVICES

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 63373 has been prepared by IEC technical committee 47: Semiconductor devices. It is an
International Standard.
This standard is based upon JEP173 [1]. It is used with permission of the copyright holder,
JEDEC Solid State Technology Association.
The text of this International Standard is based on the following documents:
Draft Report on voting
47/2690/CDV 47/2735/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
___________
Numbers in square brackets refer to the Bibliography.

– 4 – IEC 63373:2022 © IEC 2022
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.

INTRODUCTION
This document is intended for use in the GaN power semiconductor and related power electronic
industries, and provides guidelines for measuring the dynamic ON-resistance of GaN power
devices.
Gallium Nitride (GaN) lateral power High Electron Mobility Transistor (HEMT) conducts through
a two-dimensional electron gas (2DEG) in ON-state operation. Due to the various stress
conditions that the device encounters during power electronic switching applications, some
charge could get trapped in specific regions of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.