IEC 60286-2:2015

IEC 60286-2 ®
Edition 4.0 2015-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –
Part 2: Tape packaging of components with unidirectional leads on continuous
tapes
Emballage de composants pour opérations automatisées –
Partie 2: Emballage des composants à sorties unilatérales en bandes continues

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 60 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 60286-2 ®
Edition 4.0 2015-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –

Part 2: Tape packaging of components with unidirectional leads on continuous

tapes
Emballage de composants pour opérations automatisées –

Partie 2: Emballage des composants à sorties unilatérales en bandes continues

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.020; 31.240 ISBN 978-2-8322-2595-0

– 2 – IEC 60286-2:2015 © IEC 2015
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and symbols . 7
3.1 Terms and definitions . 7
3.2 Symbols . 10
4 Dimensions . 13
4.1 Tape width dimensions (W, W , W , W ) . 13
0 1 2
4.1.1 Tape width (W) . 13
4.1.2 Hold-down tape width (W ) . 13
4.1.3 Distance between the upper edges of the carrier tape and the abscissa
(W ) . 13
4.1.4 Distance between the upper edges of the carrier tape and the hold-down

tape (W ) . 13
4.2 Components and sprocket hole pitches (P, P , P , P , D ) . 13
0 1 2 0
4.2.1 General . 13
4.2.2 Pitch between two consecutive mutual components (P) . 13
4.2.3 Pitch between two consecutive sprocket holes (P ) . 13
4.2.4 Distance between the ordinate and the first lead of the component on the
drawer side (for components with two leads) (P ) . 14
4.2.5 Distance between the ordinate and the center lead of the component on
the drawer side (for components with three leads) (P ) . 14
4.2.6 Sprocket hole diameter (D ) . 14
4.3 Dimensions for component position relative to the abscissa (H, H , H , H ,
0 1 2
H ) . 14
4.3.1 Distance between the abscissa and the bottom plane of the component
body (H). 14
4.3.2 Distance between the abscissa and the reference plane of components
with crimped leads (H ) . 14
4.3.3 Distance between the abscissa and the top of the body of the
components (H ) . 14
4.3.4 Distance between the abscissa and the tip of the short terminal without
tape (H ) . 14
4.3.5 Distance between the bottom of the component and the tip of the short
terminal without tape (H ) . 14
4.4 Lead terminal dimensions (d, d , F, F , F , L, K) and tape thickness (T, T ) . 15
1 1 2 1
4.4.1 Dimensions and tolerances of lead spacing for two leaded components
(F) and for three leaded components (F , F ) . 15
1 2
4.4.2 Lead terminal diameter (d, d ) . 15
4.4.3 Tape thickness (T, T ) . 15
4.4.4 Maximum permissible protrusion of the ends of the leads (L) . 15
4.4.5 Distance between the lead terminal and the short terminal without tape
(K) . 15
4.5 Maximum permissible deviation of taped component dimensions . 16
4.5.1 Maximum permissible deviation of taped component dimensions (∆h, ∆p,
∆P ) . 16
5 Taping . 16
5.1 Taping dimensions . 16
5.2 Splices . 16

5.3 Tape leader and trailer . 17
6 Tape . 17
6.1 Polarization direction on tape . 17
6.2 Kinks or bends on tape . 17
6.3 Adhesion to tape and extraction force . 17
6.4 Tape breaking force . 18
6.5 Tape material . 18
6.6 Hold-down tape . 18
6.7 Missing components . 18
7 Packing . 19
7.1 General . 19
7.2 Reel dimensions. 19
7.2.1 Component tape reeling . 20
7.2.2 Components protection . 20
7.2.3 Reel filling . 21
7.3 Maximum dimensions of the fan-fold container . 21
7.4 Recycling . 21
7.5 Marking . 21
Annex A (informative) Dimensions for two leads . 22
A.1 Dimensions for two formed leads, sprocket hole between parts . 22
A.2 Dimensions for two formed leads, sprocket hole between leads . 24
A.3 Dimensions for two straight leads, sprocket hole between parts . 26
A.4 Dimensions for two straight leads, sprocket hole
...