iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60079-14:2013/COR1:2016

(Corrigendum)

Corrigendum 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

Corrigendum 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

Corrigendum 1 - Atmosphères explosives - Partie 14: Conception, sélection et construction des installations électriques

General Information

Status
Published
Publication Date
27-Jan-2016
ICS
29.260.20 - Electrical apparatus for explosive atmospheres
Technical Committee
SC 31J - Classification of hazardous areas and installation requirements
Current Stage
PPUB - Publication issued
Start Date
15-Feb-2016
Completion Date
28-Jan-2016
Ref Project

Relations

Corrects
IEC 60079-14:2013 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection
Effective Date
05-Sep-2023

Buy Standard

IEC 60079-14:2013/COR1:2016 - Corrigendum 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection Released:1/28/2016IEC 60079-14:2013/COR1:2016 - Corrigendum 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection Released:1/28/2016
PreviousNext
Standard
IEC 60079-14:2013/COR1:2016 - Corrigendum 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection Released:1/28/2016
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2016
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 60079-14 IEC 60079-14
Edition 5.0  2013-11 Édition 5.0  2013-11

EXPLOSIVE ATMOSPHERES – ATMOSPHERES EXPLOSIVES –

Part 14: Electrical installations design, selection Partie 14: Conception, sélection et construction
and erection des installations électriques

CO RRI G ENDU M 1
Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.

9.3 Cables
Replace the existing Subclause 9.3.1 with the following new Subclause:
9.3.1 General
Cables with a tensile strength for the inner or outer sheaths of less than 8,5 MPa shall not be
used.
NOTE: Cables with tensile strength less than 8,5 MPa are sometimes known as “easy tear” cables”.

16.2.2 Cables
Replace the existing first paragraph of Subclause 16.2.2.1 with the following new paragraph:
16.2.2.1 General
Only cables with insulation capable of withstanding a dielectric test of twice the voltage of the
intrinsically safe circuit or 500 V r.m.s. (750 V d.c.), whichever is the greater, shall be used in
intrinsically safe circuits.
16.2.4.3 Intrinsically safe circuits with only one source of power
Replace the existing fifth paragraph of Subclause 16.2.4.3 with the following new paragraph:
IEC 60079-14:2013-11/COR1:2016-01(en-fr)

– 2 – IEC 60079-14:2013/COR1:2016
 IEC 2016
Where both the total inductance and capacitance of all connected apparatus excluding the
cable is greater than 1 % of L and C of the source of power respectively, then the
o o
acceptable values for L and C shall be halved and the allowable cable inductance and
o o
capacitance adjusted accordingly. However, the maximum external capacitance C derived by
o
using this rule shall be limited to a maximum value of 1 μF for Group IIB and 600 nF for Group
IIC. Further information is provided in IEC 60079-25.
NOTE 1 There is no further limitation for Group IIA.
NOTE 2 All connected apparatus includes any simple apparatus which may not have valu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60079-17:2023(Main)
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance

IEC 60079-17:2023 is available as IEC 60079-17:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60079-17:2023 applies to users and covers only those factors directly related to the inspection and maintenance of electrical installations specifically designed for hazardous areas, where the hazard is caused by explosive atmospheres.
It does not include:
- other fundamental installation and inspection requirements for electrical installations;
- the verification of electrical equipment;
- protection or ventilation of rooms;
- gas detection systems;
- the repair, overhaul and reclamation of explosion protected equipment (see IEC 60079-19).
While this document does not include inspection of safety devices such as used in ventilated rooms (see IEC 60079-13), it does include the requirements for inspection and maintenance of individual items of equipment that will be part of such systems, for example motors or sensors. This document supplements the requirements for inspection and testing in non-hazardous areas in IEC 60364-6. This document is intended to be applied where there is a risk due to the potential presence of explosive gas or dust mixtures with air or combustible dust layers under normal atmospheric conditions. It does not apply to:
- underground mining areas,
- dusts of explosives,
- pyrophoric substances.
This sixth edition cancels and replaces the fifth edition published in 2013. This edition constitutes a technical revision.

  • Standard
    144 pages
    English language
    sale 15% off
  • Standard
    95 pages
    English and French language
    sale 15% off
IEC
IEC TS 60079-48:2023(Main)
Explosive atmospheres - Part 48 - Portable or Personal Electronic Equipment – Guide for the use of equipment without a certificate for use in Hazardous Areas

IEC 60079-48:2023, which is a Technical Specification, provides guidance for an owner or operator for the use of portable or personal electronic equipment to be used in hazardous areas requiring Equipment Protection Level (EPL) Gb, Gc, Db, or Dc that are not otherwise commercially available with a certificate.
This document does not apply to:
• equipment that is electrically connected to fixed equipment or fixed wiring during use in the hazardous area, for example a lead light connected to the premises wiring system by a plug and socket,
• portable or personal equipment with a certificate for use in a hazardous area,
• transportable equipment,
• portable or personal equipment used in Group I applications,
• battery powered tools, such as drills and saws,
• portable or personal equipment used in areas requiring EPL Ga or Da equipment, or,
• medical devices.
This document does not address other considerations involving the use of portable or personal electronic equipment for other aspects of safety, for example, creation of a distraction from important work tasks, radio frequency interference with measurement and control equipment, or medical issues.
This document supplements the guidance in IEC 60079-14 regarding the use of personal or portable equipment without a certificate for use in hazardous areas.

  • Technical specification
    15 pages
    English language
    sale 15% off
IEC
IEC 60079-10-1:2020(Main)
Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

IEC 60079-10-1:2020 is concerned with the classification of areas where flammable gas or vapour hazards may arise and may then be used as a basis to support the proper design, construction, operation and maintenance of equipment for use in hazardous areas.
It is intended to be applied where there may be an ignition hazard due to the presence of flammable gas or vapour, mixed with air, but it does not apply to:
a) mines susceptible to firedamp;
b) the processing and manufacture of explosives;
c) catastrophic failures or rare malfunctions which are beyond the concept of normality dealt with in this standard;
d) rooms used for medical purposes;
e) domestic premises;
f) where a hazard may arise due to the presence of combustible dusts or combustible flyings but the principles may be used in assessment of a hybrid mixture.
Flammable mists may form or be present at the same time as flammable vapour. In such case the strict application of the details in this document may not be appropriate. Flammable mists may also form when liquids not considered to be a hazard due to the high flash point are released under pressure. In these cases the classifications and details given in this document do not apply.
For the purpose of this document, an area is a three-dimensional region or space.
Atmospheric conditions include variations above and below reference levels of 101,3 kPa (1 013 mbar) and 20 °C (293 K), provided that the variations have a negligible effect on the explosion properties of the flammable substances.
In any site, irrespective of size, there may be numerous sources of ignition apart from those associated with equipment. Appropriate precautions will be necessary to ensure safety in this context. This standard is applicable with judgement for other ignition sources but in some applications other safeguards may also need to be considered. E.g. larger distances may apply for naked flames when considering hot work permits.
This document does not take into account the consequences of ignition of an explosive atmosphere except where a zone is so small that if ignition did occur it would have negligible consequences.
This third edition of IEC 60079-10-1 cancels and replaces the second edition, published in 2015, and constitutes a technical revision, see foreword for further details.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    373 pages
    English language
    sale 15% off
  • Standard
    236 pages
    English and French language
    sale 15% off
IEC
IEC 60079-14:2013/ISH2:2020(Main)
Interpretation sheet 2 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection
  • Standard
    2 pages
    English language
    sale 15% off
IEC
IEC 60079-19:2019(Main)
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

IEC 60079-19:2019 gives instructions, principally of a technical nature, on the repair, overhaul, reclamation and modification of equipment designed for use in explosive atmospheres; it is not applicable to maintenance, other than when repair and overhaul cannot be disassociated from maintenance, neither does it give advice on cable entry systems which may require a renewal when the equipment is re-installed.
This fourth edition cancels and replaces the third edition published in 2010 together with Amendment 1:2015. This edition constitutes a technical revision.
The significance of the changes between IEC 60079-19, Edition 3 (2010), including Amendment 1 (2015), and IEC 60079-19, Edition 4 (2019) are defined in the foreword and cover minor and editorial changes, extension, and major technical changes.

  • Standard
    166 pages
    English and French language
    sale 15% off
IEC
IEC 60079-13:2017(Main)
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"

IEC 60079-13:2017 gives requirements for the design, construction, assessment, verification and marking of rooms used to protect internal equipment:
– located in a Zone 1 or Zone 2 or Zone 21 or Zone 22 explosive atmosphere without an internal source of gas/vapour release and protected by pressurization;
– located in a Zone 2 explosive atmosphere with or without an internal source of gas/vapour release and protected by artificial ventilation;
– located in a non-hazardous area, containing an internal source of gas/vapour release and protected by artificial ventilation;
– located in a Zone 1 or Zone 2 or Zone 21 or Zone 22 explosive atmosphere containing an internal source of gas/vapour release and protected by both pressurization and artificial ventilation.
The term "room" used in this document includes single rooms, multiple rooms, a complete building or a room contained within a building. A room is intended to facilitate the entry of personnel and includes inlet and outlet ducts. An acoustic hood and other like enclosures designed to permit the entry of personnel can be considered as a room.
This document also includes requirements related safety devices and controls necessary to ensure that artificial ventilation, purging and pressurization is established and maintained.
A room assembled or constructed on site, can be either on land or off-shore. The room is primarily intended for installation by an end-user but could be constructed and assessed at a manufacturer’s facility, where the final construction such as ducting can be completed on site.
This document does not specify the methods that may be required to ensure adequate air quality for personnel with regard to toxicity and temperature within the room. National or other regulations and requirements may exist to ensure the safety of personnel in this regard.
This second edition cancels and replaces the first edition published in 2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) modification of the title of this document to include artificially ventilated room "v" in addition to pressurized room "p";
b) addition of types of protection "pb", "pc", and "vc" and removal of types of protection "px", "py", "pz" and "pv";
c) definition of the differences between pressurization and artificial ventilation types of protection;
d) removal of protection of rooms with an inert gas or a flammable gas from the scope of this document;
e) addition of an informative annex to include examples of applications where types of protection pressurization or artificial ventilation or pressurization and artificial ventilation can be used and associated guidelines.

  • Standard
    35 pages
    English language
    sale 15% off
  • Standard
    72 pages
    English and French language
    sale 15% off
IEC
IEC 60079-14:2013/ISH1:2017(Main)
Intrepretation sheet 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection
  • Standard
    4 pages
    English and French language
    sale 15% off
IEC
IEC 60079-10-1:2015/COR1:2015(Corrigendum)
Corrigendum 1 - Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
  • Standard
    10 pages
    English language
    sale 15% off
IEC
IEC 60079-10-1:2015(Main)
Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
SIST IEC/TR2 61200-53:2000

IEC 60079-10-1:2015 is concerned with the classification of areas where flammable gas or vapour hazards may arise and may then be used as a basis to support the proper selection and installation of equipment for use in hazardous areas. It is intended to be applied where there may be an ignition hazard due to the presence of flammable gas or vapour, mixed with air, but it does not apply to:
- mines susceptible to firedamp;
- the processing and manufacture of explosives;
- catastrophic failures or rare malfunctions which are beyond the concept of abnormality dealt with in this standard (see 3.7.3 and 3.7.4);
- rooms used for medical purposes;
- commercial and industrial applications where only low pressure fuel gas is used for appliances e.g. for cooking, water heating and similar uses, where the installation is compliant with relevant gas codes;
- domestic premises;
- where a hazard may arise due to the presence of combustible dusts or combustible flyings but the principles may be used in assessment of a hybrid mixture (refer also IEC 60079-10-2). This second edition of IEC 60079-10-1 cancels and replaces the first edition, published in 2008, and constitutes a technical revision. The significant technical changes with respect to the previous edition are identified in the Foreward of the document. Keywords: ignition hazards, flammable gas or vapour, risk of explosions

  • Standard
    107 pages
    English language
    sale 15% off
  • Standard
    262 pages
    English language
    sale 15% off
  • Standard
    226 pages
    English and French language
    sale 15% off
  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 60079-19:2010/AMD1:2015(Amendment)
Amendment 1 - Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

Defines the distribution line message specification (DLMS) within the OSI application layer.

This publication is of high relevance for Smart Grid.

  • Standard
    13 pages
    English and French language
    sale 15% off