Corrigendum 1 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

Corrigendum 1 - Essais relatifs aux risques du feu - Partie 11-2: Flammes d'essai - Flamme à prémélange de 1 kW nominal - Appareillage, disposition d'essai de vérification et indications

General Information

Status: Published
Publication Date: 22-Feb-2006

ICS: 13.220.40 - Ignitability and burning behaviour of materials and products

Technical Committee: TC 89 - Fire hazard testing

Current Stage: DELPUB - Deleted Publication
Start Date: 09-Dec-2013
Completion Date: 13-Feb-2026

Relations

Corrects: IEC 60695-11-2:2003 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
Effective Date: 05-Sep-2023

Revised: IEC 60695-11-2:2013 - Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
Effective Date: 05-Sep-2023

IEC 60695-11-2:2003/COR1:2006 - Corrigendum 1 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
Released:2/23/2006 - Page 1 preview

Standard

IEC 60695-11-2:2003/COR1:2006 - Corrigendum 1 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance Released:2/23/2006

English and French language

10 pages

sale 15% off

Preview

sale 15% off

Preview

Get Certified

Connect with accredited certification bodies for this standard

NSF International

Global independent organization facilitating standards development and certification.

ANAB United States Verified

Visit Website

CIS Institut d.o.o.

Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.

SA Slovenia Verified

Visit Website

Kiwa BDA Testing

Building and construction product certification.

RVA Netherlands Verified

Visit Website

Frequently Asked Questions

What is IEC 60695-11-2:2003/COR1:2006?

IEC 60695-11-2:2003/COR1:2006 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Corrigendum 1 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance". This standard covers: Corrigendum 1 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

What is the scope of IEC 60695-11-2:2003/COR1:2006?

Corrigendum 1 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

What ICS categories does IEC 60695-11-2:2003/COR1:2006 belong to?

IEC 60695-11-2:2003/COR1:2006 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to IEC 60695-11-2:2003/COR1:2006?

IEC 60695-11-2:2003/COR1:2006 has the following relationships with other standards: It is inter standard links to IEC 60695-11-2:2003, IEC 60695-11-2:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

How can I access IEC 60695-11-2:2003/COR1:2006?

IEC 60695-11-2:2003/COR1:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)

IEC 60695-11-2:2003/COR1:2006 ...

Publication 60695-11-2 de la CEI IEC Publication 60695-11-2
(Première édition – 2003) (First edition – 2003)
Fire hazard testing –
Essais relatifs aux risques du feu –

Part 11-2: Test flames –
Partie 11-2: Flammes d'essai –
1 kW nominal pre-mixed flame –
Flamme à prémélange de 1 kW nominal –
Apparatus, confirmatory test arrangement
Appareillage, disposition d'essai
and guidance
de vérification et indications

CORRIGENDU
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

IEC

IEC TR 60695-2-16:2025(Main)

Fire hazard testing - Part 2-16: Glowing/hot-wire based test methods - Summary of the round robin tests related to the use of pyrometer for glow-wire temperature measurements according to IEC 60695-2-10

IEC TR 60695-2-16:2025 specifies the results of the round robin tests related to the use of the pyrometer, for the measurement of the glow-wire temperature, according to IEC 60695-2-10.
This Technical Report summarize the objectives and the results of a pre-round robin test and two round robin tests, performed by the IEC: "Glow-wire testing: Optimization of the temperature measuring system".
The outcome of the work conducted by the IEC resulted in a proposal for a new Annex in IEC 60695-2-10, describing the minimum technical characteristics and usage conditions for the pyrometer, as an alternative temperature measurement instrument to the thermocouple.

Technical report
124 pages
English language
sale 15% off

03-Sep-2025
13.220.40
29.020
TC 89

IEC

IEC TS 60695-2-20:2024(Main)

Fire hazard testing - Part 2-20: Glowing/hot-wire based test methods - Hot-wire ignition test (HWI) method - Apparatus, verification, test method and guidance

IEC TS 60695-2-20:2024, which is a technical specification, describes a test method that applies to solid electrical insulating materials of which test specimens can be provided. The test measures the time required to ignite a test specimen when it is affected by heat from an electrically heated wire wound around the test specimen. The test method can be used to provide classifications which can be used for quality assurance, the preselection of materials of products as described in IEC 60695-1-30, or to verify the required minimum classification of materials used in end products. This fourth edition cancels and replaces the third edition published in 2021. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
Removed all text which was related to drip or dripping, since in this 4th edition only ignition is taken into consideration for determination of the classification level;
Title changed: "Hot wire coil test method" is now "Hot wire ignition (HWI) test method".

Technical specification
56 pages
English language
sale 15% off

14-Nov-2024
13.220.40
29.020
TC 89

IEC

IEC 60695-2-10:2021/COR1:2024(Corrigendum)

Corrigendum 1 - Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

Standard
4 pages
English and French language
sale 15% off

09-Jan-2024
13.220.40
29.020
TC 89

IEC

IEC TS 60695-2-21:2023(Main)

Fire hazard testing - Part 2-21: Glowing/hot-wire based test methods - Fire containment test on finished units

IEC 60695-2-21:2023, which is a Technical Specification, specifies a fire containment test method for finished units. It is intended to verify the capability of containing of a fire event generated by an effective ignition source inside a finished unit.
Unless otherwise specified by the relevant product standard, determination of the fire containment described in this document does not apply to any of the following:
- A single electrical component;
- A single electrical component when incorporated into a finished unit;
- Electrical installation products such as distribution boards, circuit protection devices, switchgear, controlgear, cable management system and electrical accessories (wiring devices).

Technical specification
30 pages
English language
sale 15% off

26-Jun-2023
13.220.40
TC 89

IEC

IEC 60695-7-2:2021(Main)

Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods

IEC 60695-7-2:2021 gives a brief summary of the test methods that are in common use in the assessment of the toxicity of fire effluent. It includes special observations on their relevance to real fire scenarios and gives recommendations on their use.
It advises which tests provide toxic potency data that are relevant to real fire scenarios, and which are suitable for use in fire hazard assessment and fire safety engineering.
The list of test methods is not to be considered exhaustive.
This summary cannot be used in place of published standards which are the only valid reference documents.
This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.
One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.
This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision.
The main changes with respect to the previous edition are listed below:
– New text in the introduction;
– New text in the scope;
– Clause 2 has been updated;
– Many terms and definitions in Clause 3 reproduced from ISO 13943 have been deleted. Other terms and definitions have been added.
– New text in Subclauses 4.3 and 4.4;
– New text in Subclause 6.1;
– References to IEC 60695-7-50 and -51 (now withdrawn) have been removed;
– Reference to DEF STAN 07-247 has been added;
– Details of ISO/TS 19021 have been added;
– Details of EN 17084 have been added;
– New text added concerning ISO/TS 19700;
– New text added concerning the IMO FTP toxicity test;
– New Subclause 7.1 has been added;
– The Annex in Edition1 has been replaced by new Clause 8;
– The bibliography has been updated.

Standard
90 pages
English and French language
sale 15% off

27-Oct-2021
13.220.40
29.020
TC 89

IEC

IEC 60695-2-11:2021(Main)

Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)

IEC 60695-2-11:2021 specifies a test method on an end product. It is intended to simulate the effects of thermal stresses produced by an electrically heated source to represent a fire hazard. This test method is used to check that, under defined test conditions, an end product exposed to an electrically heated source has either a limited ability to ignite or, if it ignites, a limited ability to propagate flame. However, the fire hazard analysis, the flammability aspects and the flame spreading to other products are not covered by this document. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This publication is to be read in conjunction with IEC 60695-2-10. This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Numerous terms and definitions relevant to this document have been added to Clause 3.

Standard
48 pages
English language
sale 15% off
Standard
32 pages
English and French language
sale 15% off

27-Oct-2021
13.220.40
29.020
TC 89

IEC

IEC 60695-2-10:2021(Main)

Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

IEC 60695-2-10:2021 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. The test procedure described in this document is a common test procedure intended for the small-scale tests in which a standardized electrically heated wire is used as a source of ignition. It is a common part of the test procedures applied to end products and to solid electrical insulating materials or other solid combustible materials. A detailed description of each particular test procedure is given in IEC 60695-2-11, IEC 60695-2-12 and IEC 60695-2-13. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This standard is to be used in conjunction with IEC 60695-2-11, IEC 60695-2-12, and IEC 60695-2-13. This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) New terms and definitions with regards to times and durations have been added to Clause 3.
b) Previous Annex A of Equipment manufacturers and suppliers has been deleted.
c) Annex A (previous Annex B) for ignition and flaming observations has been changed from informative to normative.
d) New Annex C has been added, which visualizes times and durations, and gives examples for the behaviour of specimens, and how to evaluate them.
The contents of the corrigendum of January 2024 have been included in this copy.

Standard
75 pages
English language
sale 15% off
Standard
46 pages
English and French language
sale 15% off

27-Oct-2021
13.220.40
29.020
TC 89

IEC

IEC 60695-2-12:2021(Main)

Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials

IEC 60695-2-12:2021 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for flammability testing to determine the glow-wire flammability index (GWFI). GWFI is the highest temperature, determined during this standardized procedure, at which the tested material does not ignite or, if it does, extinguishes within 30 s after removal of the glow-wire and is not totally consumed; and molten drips, if they occur, do not ignite the wrapping tissue. This test method is a materials test carried out on a series of standard test specimens. The data obtained, along with data from the glow-wire ignition temperature (GWIT) test method for materials, IEC 60695-2-13, can then be used in a preselection process in accordance with IEC 60695-1-30 [4] to judge the ability of materials to meet the requirements of IEC 60695-2-11. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This publication is to be read in conjunction with IEC 60695-2-10. This third edition cancels and replaces the second edition published in 2010 and Amendment 1:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) New terms and definitions with regards to times and durations have been added to Clause 3, with an effect on the application of the test method.

Standard
40 pages
English language
sale 15% off
Standard
26 pages
English and French language
sale 15% off

07-Oct-2021
13.220.40
29.020
TC 89

IEC

IEC 60695-9-2:2021(Main)

Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods

IEC 60695-9-2:2021 presents a summary of published test methods that are used to determine the surface spread of flame of electrotechnical products or materials from which they are formed.
It represents the current state of the art of the test methods and, where available, includes special observations on their relevance and use.
The list of test methods is not to be considered exhaustive, and test methods that were not developed by the IEC are not to be considered as endorsed by the IEC unless this is specifically stated.
This summary cannot be used in place of published standards which are the only valid reference documents.
This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and
ISO/IEC Guide 51.
One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.
This International Standard is to be used in conjunction with IEC 60695-1.
This second edition cancels and replaces the first edition of IEC 60695-9-2 published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Updated introduction
b) Updated normative references
c) Updated terms and definitions
d) New Subclauses 4.1 and 4.2
e) Reference to fire stages as defined in ISO 19706 (Table 1)
f) New sub-division of tests into the following subclauses:
4.3 Small-scale fire tests
4.4 Medium and intermediate-scale fire tests
4.5 Intermediate and large-scale fire tests for cables
4.6 Real-scale fire tests for cables
g) Updated text in parts of Clause 4
h) Addition of the following test methods:
IEC TS 60695-11-21
IEC 60684-2:2011, Clause 26
ISO 3582
ISO 9772
ISO 9773
ISO 12992
ISO 21367
i) New Clause 5 and Table 4 giving an overview of test methods
j) Deletion of all the Annexes
k) Updated bibliography

Standard
84 pages
English and French language
sale 15% off

24-Aug-2021
13.220.40
29.020
TC 89

IEC

IEC 60695-2-13:2021(Main)

Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

IEC 60695-2-13:2021 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWIT). The GWIT is the temperature which is 25 K (or 30 K) higher than the maximum test temperature, determined during this standardized procedure, at which the tested material does not ignite, or sustained flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not totally consumed. This test is a materials test carried out on a series of standard test specimens. The data obtained, along with data from the glow-wire flammability index (GWFI) test method for materials, IEC 60695-2-12, can then be used in a preselection process in accordance with IEC 60695-1-30 [4] to judge the ability of materials to meet the requirements of IEC 60695-2-11. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This publication is to be read in conjunction with IEC 60695-2-10. This third edition cancels and replaces the second edition published in 2010 and Amendment 1:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- New terms and definitions with regards to times and durations have been added to Clause 3, with an effect on the application of the test method.

Standard
38 pages
English language
sale 15% off
Standard
25 pages
English and French language
sale 15% off

23-Aug-2021
13.220.40
29.020
TC 89

Corrigendum 1 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

Corrigendum 1 - Essais relatifs aux risques du feu - Partie 11-2: Flammes d'essai - Flamme à prémélange de 1 kW nominal - Appareillage, disposition d'essai de vérification et indications

General Information

Relations

IEC 60695-11-2:2003/COR1:2006 - Corrigendum 1 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance Released:2/23/2006

Get Certified

NSF International

CIS Institut d.o.o.

Kiwa BDA Testing

Frequently Asked Questions

Standards Content (Sample)

Questions, Comments and Discussion

This May Also Interest You