prEN IEC 60335-2-4:2024
(Main)Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors
Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors
This European Standard deals with the safety of stand-alone electric spin extractors, and pin extractors incorporated in washing machines that have separate containers for washing and spin extraction for household and similar purposes that have a capacity not exceeding 10 kg of dry cloth and a drum peripheral speed not exceeding 50 m/s, their rated voltages being not more than 250 V for single-phase appliances and 480 V for other appliances
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-4: Besondere Anforderungen für Wäscheschleudern
Appareils électrodomestiques et analogues - Sécurité - Partie 2-4: Exigences particulières pour les essoreuses centrifuges
IEC 60335-2-4:2023 est disponible sous forme de IEC 60335-2-4:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente. L'IEC 60335-2-4:2023 traite de la sécurité: - des essoreuses centrifuges électriques indépendantes; et - des essoreuses centrifuges incorporées à des machines à laver le linge qui comportent des tambours distincts pour le lavage et l'essorage pour usages domestiques et analogues dont la capacité ne dépasse pas 10 kg de linge sec, dont la vitesse périphérique du tambour ne dépasse pas 50 m/s et dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils, y compris les appareils alimentés en courant continu et les appareils alimentés par batteries. Les appareils non destinés à un usage domestique normal, mais qui peuvent néanmoins constituer une source de danger pour le public, tels que les essoreuses centrifuges destinées à être utilisées par des usagers non avertis dans des magasins, chez des artisans et dans des fermes, ainsi que les essoreuses centrifuges destinées à un usage collectif dans des immeubles d'habitation ou dans des laveries automatiques, relèvent du domaine d'application de la présente norme. Dans la mesure du possible, la présente norme traite des dangers raisonnablement prévisibles que présentent les appareils pour toutes les personnes. Cependant, elle ne tient pas compte en général: - des personnes (y compris des enfants) dont les capacités physiques, sensorielles ou mentales; ou le manque d'expérience et de connaissance les empêchent d'utiliser l'appareil en toute sécurité sans surveillance ou instruction; - des enfants qui jouent avec l'appareil. L'attention est attirée sur le fait que: - pour les appareils destinés à être utilisés dans des véhicules ou à bord de navires ou d'avions, des exigences supplémentaires peuvent être nécessaires; - dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs, par les organismes nationaux responsables de l'alimentation en eau et par des organismes similaires. La présente norme ne s'applique pas: - aux appareils prévus exclusivement pour des usages industriels; - aux appareils destinés à être utilisés dans des locaux qui présentent des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz). Cette huitième édition annule et remplace la septième édition parue en 2021. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) le texte a été aligné sur l'IEC 60335-1:2020; b) certaines notes ont été converties en texte normatif (20.103, 20.104, 22.101); c) le calibre d'essai 19 a été ajouté pour l'accès aux parties actives et aux parties mobiles (8.1.1, 20.2); d) des limites de température ont été ajoutées pour les surfaces accessibles (11.3, 11.8); e) des conditions de fonctionnement ont été spécifiées pour les appareils alimentés par batteries (B.11.1). La présente partie 2 doit être utilisée conjointement avec la dernière éditi
Gospodinjski in podobni električni aparati - Varnost - 2-4. del: Posebne zahteve za centrifuge
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Gospodinjski in podobni električni aparati - Varnost - 2-4. del: Posebne zahteve za
centrifuge
Household and similar electrical appliances - Safety - Part 2-4: Particular requirements
for spin extractors
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-4:
Besondere Anforderungen für Wäscheschleudern
Appareils électrodomestiques et analogues - Sécurité - Partie 2-4: Exigences
particulières pour les essoreuses centrifuges
Ta slovenski standard je istoveten z: prEN IEC 60335-2-4:2024
ICS:
13.120 Varnost na domu Domestic safety
97.060 Aparati za nego perila Laundry appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2024
ICS 13.120; 97.060 Will supersede EN IEC 60335-2-4:2023; EN IEC 60335-2-
4:2023/A11:2023
English Version
Household and similar electrical appliances - Safety - Part 2-4:
Particular requirements for spin extractors
(IEC 60335-2-4:2023)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-4: Exigences particulières pour les essoreuses ähnliche Zwecke - Teil 2-4: Besondere Anforderungen für
centrifuges Wäscheschleudern
(IEC 60335-2-4:2023) (IEC 60335-2-4:2023)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2024-08-16.
The text of this draft consists of the text of IEC 60335-2-4:2023 (61/7014/FDIS).
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 79247 Ref. No. prEN IEC 60335-2-4:2024 E
1 European foreword
2 This document (prEN IEC 60335-2-4:2024) consists of the text of IEC 60335-2-4:2023 prepared by IEC/TC 61
3 "Safety of household and similar electrical appliances".
4 This document is currently submitted to the Enquiry.
5 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
6 This document will supersede EN IEC 60335-2-4:2023 and all of its amendments and corrigenda (if any).
IEC 60335-2-4 ®
Edition 8.0 2023-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-4: Particular requirements for spin extractors
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-4: Exigences particulières pour les essoreuses centrifuges
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.060, 13.120 ISBN 978-2-8322-7879-6
– 2 – IEC 60335-2-4:2023 © IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 9
4 General requirement . 9
5 General conditions for the tests . 9
6 Classification . 10
7 Marking and instructions . 10
8 Protection against access to live parts . 10
9 Starting of motor-operated appliances . 11
10 Power input and current . 11
11 Heating . 11
12 Charging of metal-ion batteries . 12
13 Leakage current and electric strength at operating temperature . 12
14 Transient overvoltages . 12
15 Moisture resistance . 12
16 Leakage current and electric strength . 13
17 Overload protection of transformers and associated circuits . 13
18 Endurance . 13
19 Abnormal operation . 13
20 Stability and mechanical hazards . 14
21 Mechanical strength . 16
22 Construction . 17
23 Internal wiring . 17
24 Components . 17
25 Supply connection and external flexible cords . 18
26 Terminals for external conductors . 18
27 Provision for earthing . 18
28 Screws and connections . 18
29 Clearances, creepage distances and solid insulation . 18
30 Resistance to heat and fire . 18
31 Resistance to rusting . 18
32 Radiation, toxicity and similar hazards . 18
Annexes . 20
Annex B (normative) Battery-operated appliances, separable batteries and detachable
batteries for battery-operated appliances . 20
Annex C (normative) Ageing test on motors . 21
Annex R (normative) Software evaluation . 22
Bibliography . 23
IEC 60335-2-4:2023 © IEC 2023 – 3 –
Figure 101 – Probe for measuring surface temperatures . 19
Table 101 – Maximum temperature rises for specified external accessible surfaces
under normal operating conditions . 12
– 4 – IEC 60335-2-4:2023 © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-4: Particular requirements for spin extractors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.