Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications

IEC 62620:2014 specifies marking, tests and requirements for lithium secondary cells and batteries used in industrial applications including stationary applications. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this standard, the former takes precedence. (e.g. IEC 62660 series on road vehicles). The following are some examples of applications that utilize the cells and batteries under the scope of this standard. - Stationary applications: telecom, uninterruptible power supplies (UPS), electrical energy storage system, utility switching, emergency power and similar applications. - Motive applications: fork-lift truck, golf cart, AGV, railway, and marine, excluding road vehicles. This standard applies to cells and batteries. If the battery is divided into smaller units, the smaller unit can be tested as the representative of the battery. The manufacturer clearly declares the tested unit. The manufacturer may add functions, which are present in the final battery, to the tested unit.

Akkumulatoren und Batterien mit alkalischen oder anderen nichtsäurehaltigen Elektrolyten - Lithium-Akkumulatoren und -batterien für industrielle Anwendungen

Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Éléments et batteries d'accumulateurs au lithium pour utilisation dans les applications industrielles

L'IEC 62620:2014 spécifie le marquage, les essais et les exigences pour les éléments et les batteries d accumulateurs au lithium utilisés dans les applications industrielles, y compris les applications stationnaires. En cas d'existence d'une norme IEC spécifiant des conditions d'essai et des exigences pour des éléments destinés à des applications particulières, et qui serait en contradiction avec la présente norme, la publication particulière est appliquée en priorité (par exemple, la série IEC 62660 sur les véhicules routiers). Ci-après figurent des exemples d'applications utilisant les éléments et les batteries inclus dans le domaine d'application de la présente norme. - Applications stationnaires: télécommunications, alimentation sans interruption (ASI), système de stockage de l'énergie électrique, sélecteur de service, alimentation d'urgence et applications analogues. - Applications mobiles: chariot élévateur, voiturette de golf, AGV, ferroviaire, et marine, à l'exception des véhicules routiers. La présente norme s'applique aux éléments et aux batteries. Si la batterie est divisée en unités plus petites, l'unité plus petite peut être soumise aux essais pour représenter l'ensemble de la batterie. Le fabricant déclare clairement l'unité soumise aux essais. Le fabricant peut ajouter des fonctions, qui sont présentes dans la batterie finale, à l'unité soumise aux essais.

Sekundarni členi in baterije z alkalnimi ali drugimi nekislinskimi elektroliti - Sekundarni litijevi členi in baterije za industrijsko uporabo (IEC 62620:2014)

Ta mednarodni standard določa označevanje, preskuse in zahteve za sekundarne litijeve člene in baterije za industrijsko rabo, vključno s stacionarno uporabo. Če obstaja standard IEC, ki določa preskusne pogoje in zahteve za člene za posebno uporabo ter je v nasprotju s tem standardom, ima prednost prvi. (npr. skupina standardov IEC 62660 o cestnih vozilih).
Spodaj je naštetih nekaj primerov uporabe členov in baterij v okviru tega standarda.
• Stacionarna uporaba: telekomunikacije, napajalniki za neprekinjeno napajanje (UPS), sistem za shranjevanje električne energije, preklapljanje storitev, zasilno napajanje in podobne uporabe.
• Pogonska uporaba: viličar, voziček za golf, AGV; železnica in pomorstvo, brez cestnih vozil.
Ker ta standard zajema baterije za različno industrijsko uporabo, vključuje skupne in minimalne zahteve za različno uporabo.
Ta standard velja za člene in baterije. Če je baterija razdeljena na manjše enote, je mogoče manjšo enoto preskusiti kot reprezentativno za baterijo. Proizvajalec jasno navaja preskušeno enoto. Proizvajalec lahko preskušeni enoti doda funkcije, ki jih vsebuje končna baterija.

General Information

Status
Published
Publication Date
15-Jan-2015
Withdrawal Date
29-Dec-2017
Current Stage
6060 - Document made available - Publishing
Start Date
16-Jan-2015
Completion Date
16-Jan-2015

Relations

Buy Standard

Standard
EN 62620:2015
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62620:2015
01-maj-2015
6HNXQGDUQLþOHQLLQEDWHULMH]DONDOQLPLDOLGUXJLPLQHNLVOLQVNLPLHOHNWUROLWL
6HNXQGDUQLOLWLMHYLþOHQLLQEDWHULMH]DLQGXVWULMVNRXSRUDER ,(&
Secondary cells and batteries containing alkaline or other non-acid electrolytes -
Secondary lithium cells and batteries for use in industrial applications (IEC 62620:2014)
Ta slovenski standard je istoveten z: EN 62620:2015
ICS:
29.220.30 $ONDOQLVHNXQGDUQLþOHQLLQ Alkaline secondary cells and
EDWHULMH batteries
SIST EN 62620:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62620:2015

---------------------- Page: 2 ----------------------

SIST EN 62620:2015


EUROPEAN STANDARD EN 62620

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2015
ICS 29.220.30

English Version
Secondary cells and batteries containing alkaline or other non-
acid electrolytes - Secondary lithium cells and batteries for use in
industrial applications
(IEC 62620:2014)
Accumulateurs alcalins et autres accumulateurs à Akkumulatoren und Batterien mit alkalischen oder anderen
électrolyte non acide - Éléments et batteries nichtsäurehaltigen Elektrolyten - Lithium-Akkumulatoren
d'accumulateurs au lithium pour utilisation dans les und -batterien für industrielle Anwendungen
applications industrielles (IEC 62620:2014)
(IEC 62620:2014)
This European Standard was approved by CENELEC on 2014-12-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62620:2015 E

---------------------- Page: 3 ----------------------

SIST EN 62620:2015
EN 62620:2015 - 2 -
Foreword
The text of document 21A/561/FDIS, future edition 1 of IEC 62620, prepared by SC 21A "Secondary
cells and batteries containing alkaline or other non-acid electrolytes, " of IEC/TC 21 "Secondary cells
and batteries" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62620:2015.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-09-30
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-12-30
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62620:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60051 Series NOTE Harmonised in EN 60051 series (not modified).
IEC 61434 NOTE Harmonised in EN 61434 (not modified).
IEC 61960 NOTE Harmonised as EN 61960 (not modified).
IEC 62660 Series NOTE Harmonised in EN 62660 series (not modified).

---------------------- Page: 4 ----------------------

SIST EN 62620:2015
- 3 - EN 62620:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.