iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 60404-16:2018/AC:2018-12

(Corrigendum)

Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester

Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester

IEC - Corrected version

Magnetische Werkstoffe - Teil 16 : Verfahren zur Messung der magnetischen Eigenschaften von eisenbasiertem, amorphem Band unter Verwendung eines Tafelmessgerätes

Matériaux magnétiques - Partie 16: Méthodes de mesure des propriétés magnétiques des bandes en alliage amorphe à base de fer à l'aide de l'essai sur tôle unique

Magnetni materiali - 16. del: Metode merjenja magnetnih lastnosti amorfnega traku na osnovi železa z uporabo enolistnega preskuševalnika - Popravek AC (IEC 60404-16:2018/COR1:2018)

General Information

Status
Published
Publication Date
20-Dec-2018
ICS
17.220.20 - Measurement of electrical and magnetic quantities
29.030 - Magnetic materials
Technical Committee
CLC/SR 68 - Magnetic alloys and steels
Drafting Committee
CLC/SR 68 - Magnetic alloys and steels
Current Stage
6060 - Document made available - Publishing
Start Date
21-Dec-2018
Completion Date
21-Dec-2018
Ref Project
SIST EN IEC 60404-16:2018/AC:2019 - Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester (IEC 60404-16:2018/COR1:2018)

Relations

Corrects
EN IEC 60404-16:2018 - Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
Effective Date
25-Dec-2018

Buy Standard

EN IEC 60404-16:2018/AC:2019EN IEC 60404-16:2018/AC:2019
PreviousNext
Corrigendum
EN IEC 60404-16:2018/AC:2019
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Magnetni materiali - 16. del: Metode merjenja magnetnih lastnosti amorfnega traku na osnovi železa z uporabo enolistnega preskuševalnika - Popravek AC (IEC 60404-16:2018/COR1:2018)Magnetische Werkstoffe - Teil 16 : Verfahren zur Messung der magnetischen Eigenschaften von eisenbasiertem, amorphem Band unter Verwendung eines Tafelmessgerätes (IEC 60404-16:2018/COR1:2018)Matériaux magnétiques - Partie 16: Méthodes de mesure des propriétés magnétiques des bandes en alliage amorphe à base de fer à l'aide de l'essai sur tôle unique (IEC 60404-16:2018/COR1:2018)Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester (IEC 60404-16:2018/COR1:2018)29.030Magnetni materialiMagnetic materials17.220.20Measurement of electrical and magnetic quantitiesICS:Ta slovenski standard je istoveten z:EN IEC 60404-16:2018/AC:2018-12SIST EN IEC 60404-16:2018/AC:2019en01-marec-2019SIST EN IEC 60404-16:2018/AC:2019SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN IEC 60404-16:2018/AC:2018-12
December 2018
ICS 17.220.20; 29.030 English Version
Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester (IEC 60404-16:2018/COR1:2018)
Matériaux magnétiques - Partie 16: Méthodes de mesure des propriétés magnétiques des bandes en alliage amorpheà base de fer à l'aide de l'essai sur tôle unique (IEC 60404-16:2018/COR1:2018)
Magnetische Werkstoffe - Teil 16 : Verfahren zur Messung der magnetischen Eigenschaften von eisenbasiertem, amorphem Band unter Verwendung eines Tafelmessgerätes (IEC 60404-16:2018/COR1:2018) This corrigendum becomes effective on 21 December 2018 for incorporation in the English language version of the EN. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60404-16:2018/AC:2018-12 ESIST EN IEC 60404-16:2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60404-8-1:2023(Main)
Magnetic materials - Part 8-1: Specifications for individual materials - Permanent magnet (magnetically hard) materials
SIST EN IEC 60404-8-1:2023

IEC 60404-8-1:2023 specifies minimum values for the principal magnetic properties of, and dimensional tolerances for, technically important permanent magnet (magnetically hard) materials. For information purposes only, this document provides values for the densities of the materials and the ranges of their chemical compositions. This fourth edition includes the following significant technical changes with respect to the previous edition: a) recently developed anisotropic REFeB hot deformed magnets and anisotropic HDDR REFeB bonded magnets are included; b) high energy Ca-La-Co ferrites stabilized by La and Co substitution are included; c) new and high-performance grades of REFeB and RE2Co17 sintered magnets and isotropic REFeN bonded magnets are added.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60404-3:2022(Main)
Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
SIST EN IEC 60404-3:2023

IEC 60404-3:2022 is available as IEC 60404-3:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60404-3:2022 is applicable to grain-oriented and non-oriented electrical steel strip and sheet for measurement of AC magnetic properties at power frequencies. The object of this document is to define the general principles and the technical details of the measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (SST). This edition includes the following significant technical changes with respect to the previous edition: - Annex A was revised. The method of determining the yokes’ lamination resistance was added to Annex A; - Annex B of the consolidated version of 2010 referred to calibration of the SST using the Epstein method. It was cancelled; - Annex B (new), Annex C and Annex D were revised, they are for information only; - Annex C was modified taking account of the new situation regarding P and R grades; - Annex D was amended by addition of Clause D.4 on the numerical air flux compensation.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60404-17:2021(Main)
Magnetic materials - Part 17: Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor
SIST EN IEC 60404-17:2022

This part of IEC 60404 is applicable to grain-oriented electrical steel strip and sheet specified in IEC 60404-8-7 for the measurement of magnetostriction characteristics under an applied AC magnetic field at 50 Hz or 60Hz. This document defines the general principles and technical details of the measurement of magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor. NOTE 1 The accelerometer method [5] is also an established method for the measurement of magnetostriction. However, it is more suited to the measurement of magnetostriction under an externally applied tensile or compressive stress, not zero stress, because it places a weight on the test specimen to prevent a deformation of the test specimen. Since this document includes the measurement at zero stress, the optical sensor method is provided as the optimum method. This document is applicable to the measurement of: - the butterfly loop; - the peak-to-peak value λp-p; - the zero-to-peak value λ0-p. The magnetostriction characteristics are determined for a sinusoidal induced secondary voltage, for a specified peak value of the magnetic polarization and at a specified magnetizing frequency. NOTE 2 Throughout this document the term “magnetic polarization” is used as described in IEC 60050-121-11-54. In some standards of the 60404 series, the term “magnetic flux density” is used.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60404-6:2018/A1:2021(Amendment)
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
SIST EN IEC 60404-6:2018/A1:2021

No scope available

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60404-7:2020(Main)
Magnetic materials - Part 7: Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an open magnetic circuit
SIST EN IEC 60404-7:2020

This part of IEC 60404 specifies a method of measurement of the coercivity of magnetic materials in an open magnetic circuit. This document is applicable to all magnetic materials with coercivities from 0,2 A/m to 160 kA/m. NOTE Examples of magnetic materials covered by this document are amorphous alloys, nanocrystalline alloys, all softmagnetic crystalline materials (e.g. Fe, FeSi-, CoFe- and FeNi-alloys), soft ferrites, hard metals, semi-hard magnetic alloys (e.g. FeCoTiAl-, FeCoV-, FeCrCo- and AlNiCo-alloys) [1]1. Special precautions are to be taken in measuring coercivities below 40 A/m, in materials with high conductivity and in test specimens which have a shape different from ellipsoids (see Annex A).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60404-6:2018/AC:2018-12(Corrigendum)
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
SIST EN IEC 60404-6:2018/AC:2019

IEC - Corrected version

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60404-13:2018(Main)
Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
SIST EN IEC 60404-13:2019

IEC 60404-13:2018 specifies the methods used for determining the resistivity, density and stacking factor of grain-oriented and non-oriented electrical steel strip and sheet. These quantities are necessary to establish the physical characteristics of the material. Moreover, the density is necessary to allow specified values of the magnetic polarization, resistivity and stacking factor to be determined. Since these properties are functions of temperature, the measurements will be made at an ambient temperature of (23 ±5) °C except when specified in this document. This edition includes the following significant technical changes with respect to the previous edition:
the sequence of the density and resistivity sections is changed and the title of the document revised to reflect this;
the van-der-Pauw method (Method R2) is also applicable to Epstein strip specimens;
the gas pyknometer method is introduced, and the liquid immersion method and the calculation method based on the chemical composition are quoted;
the requirements of the stacking factor section, such as the tolerance of the dimensions of the test specimen and the repeatability of measurement, are changed;
an example of the apparatus for determination of the resistivity using a rectangular sheet, which was previously part of the main body of the text, is moved to constitute informative Annex A;
an example of the determination of the density by using the gas pyknometer method is added as an informative Annex B;
an example of the determination of density based on the calculation of silicon and aluminium contents is added as an informative Annex C.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60404-2:1998/A1:2008/AC:2018-08(Corrigendum)
Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
SIST EN 60404-2:2002/A1:2008/AC:2018

IEC - Corrected version

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60404-6:2018(Main)
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
SIST EN IEC 60404-6:2018

NEW!IEC 60404-6:2018 is available as IEC 60404-6:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60404-6:2018 specifies methods for the measurement of AC magnetic properties of soft magnetic materials, other than electrical steels and soft ferrites, in the frequency range 20 Hz to 100 kHz. The materials covered by this part of IEC 60404 include those speciality alloys listed in IEC 60404-8-6, amorphous and nano-crystalline soft magnetic materials, pressed and sintered and metal injection moulded parts such as are listed in IEC 60404-8-9, cast parts and magnetically soft composite materials. The object of this part is to define the general principles and the technical details of the measurement of the magnetic properties of magnetically soft materials by means of ring methods. For materials supplied in powder form, a ring test specimen is formed by the appropriate pressing method for that material. The measurement of the DC magnetic properties of soft magnetic materials is made in accordance with the ring method of IEC 60404-4. The determinations of the magnetic characteristics of magnetically soft components are made in accordance with IEC 62044-3. This edition includes the following significant technical changes with respect to the previous edition: a) adaption to modern measurement and evaluation methods, in particular the introduction of the widely spread digital sampling method for the acquisition and evaluation of the measured data; b)limitation of the frequency range up to 100 kHz; c) deletion of Clause 7 of the second edition that specified the measurement of magnetic properties using a digital impedance bridge; d) addition of a new Clause 7 on the measurement of the specific total loss by the wattmeter method, including an example of the application of the digital sampling method; e) addition of an informative annex on the technical details of the digital sampling technique for the determination of magnetic properties.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60404-16:2018(Main)
Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
SIST EN IEC 60404-16:2018

IEC 60404-16:2018 is applicable to Fe-based amorphous strips specified in IEC 60404-8-11 for the measurement of AC magnetic properties at frequencies up to 400 Hz. The object of this part is to define the general principles and technical details of the measurement of the magnetic properties of Fe-based amorphous strips by means of a single sheet tester.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day