prEN IEC 60297-3-102:2025

SLOVENSKI STANDARD
01-julij-2025
Mehanske konstrukcije elektronske opreme - Mere mehanskih konstrukcij v seriji
482,6 mm (19 in) - 3-102. del: Ročica za vtikanje/izvlačenje
Mechanical structures for electronic equipment - Dimensions of mechanical structures of
the 482,6 mm (19 in) series - Part 3-102: Injector/extractor handle
Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-in-)Bauweise - Teil
3-102: Ein-/Aushebegriff
Structures mécaniques pour équipements électroniques - Dimensions des structures
mécaniques de la série 482,6 mm (19 pouces) - Partie 3-102: Poignée
d’injecteur/d’extracteur
Ta slovenski standard je istoveten z: prEN IEC 60297-3-102:2025
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

48D/785/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60297-3-102 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-06-13 2025-09-05
SUPERSEDES DOCUMENTS:
48D/782/RR
IEC SC 48D : MECHANICAL STRUCTURES FOR ELECTRICAL AND ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Germany Mr Arno Bergmann
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):

SC 48B
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the
482,6 mm (19 in) series - Part 3-102: Injector/extractor handle

PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

IEC CDV 60297-3-102©IEC 2025 2

Link to Committee Draft for Vote (CDV) online document:
https://osd.iec.ch/#/editor/archive/3254a29f-1b23-d2f3-e063-2b13000a210e/en/CCDV/1

How to access
This link leads you to the Online Standards Development (OSD) platform for National Mirror
Committee’s (NMC) comments. The project draft may be found further down this document.

Resource materials
We recommend NCs to review the available materials to better understand the member commenting
on the OSD platform. This includes the:
• OSD NC roles overview: here
• How to add and submit comments to the IEC: here
Contact
Should you require any assistance, please contact the IEC IT Helpdesk at helpdesk@iec.ch.
IEC CDV 60297-3-102©IEC 2025 3

CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Injector/extractor handles for plug-in units . 7
4.1 General . 7
4.2 Arrangement overview . 8
5 Front panel mounted injector/extractor handle . 9
5.1 Subrack interface dimensions for front panel mounted injector/extractor
handle . 9
5.2 Plug-in unit interface dimensions for front panel mounted injector/extractor
handle . 10
6 Printed board mounted injector/extractor handle . 11
6.1 Subrack interface dimensions for printed board mounted injector/extractor
handle . 11
6.2 Plug-in unit interface dimensions for printed board mounted
injector/extractor handle . 12
Bibliography . 14

Figure 1 – Conventional 19-inch subrack system mechanical structure . 6
Figure 2 – Arrangement overview of plug-in unit front panel mounted handles . 8
Figure 3 – Arrangement overview of printed board mounted injector/extractor handles . 9
Figure 4 – Subrack interface dimensions for front panel mounted injector/extractor
handle . 10
Figure 5 – Plug-in unit interface dimensions for front panel mounted injector/extractor
handle . 11
Figure 6 – Subrack interface dimensions for printed board mounted injector/extractor
handle . 12
Figure 7 – Printed board mounted injector/extractor handle interface dimensions . 13

Table 1 – Aperture height dimensions of the subrack . 10

IEC CDV 60297-3-102©IEC 2025 4

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Mechanical structures for electronic equipment - Dimensions of
mechanical structures of the 482,6 mm (19 in) series - Part 3-102:
Injector/extractor handle –
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to
promote international co-operation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, IEC publishes International Standards,
Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides
(hereafter referred to as "IEC Publication(s)"). Their preparation is entrusted to technical committees;
any IEC National Committee interested in the subject dealt with may participate in this preparatory
work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has
representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC
National Committees in that sense. While all reasonable efforts are made to ensure that the technical
content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are
used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC
Publications transparently to the maximum extent possible in their national and regional publications.
Any divergence between any IEC Publication and the corresponding national or regional publication
shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide
conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not
responsible for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual
experts and members of its technical committees and IEC National Committees for any personal
injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for
costs (including legal fees) and expenses arising out of the publication, use of, or r
...