EN IEC 63132-1:2020
(Main)Guidance for installation procedures and tolerances of hydroelectric machines - Part 1: General aspects
Guidance for installation procedures and tolerances of hydroelectric machines - Part 1: General aspects
IEC 63132-1:2020 The purpose of this part of IEC 63132 is to establish, in a general way, suitable procedures and tolerances for the installation of hydroelectric turbines and generators. This document presents a typical assembly. There are many possible ways to assemble a unit. The size of the machines, design of the machines, layout of the powerhouse and delivery schedule of the components are some of the elements that could result in additional steps, the elimination of some steps and/or assembly sequences. It is understood that a publication of this type will be binding only if, and to the extent that, both contracting parties have agreed upon it. Installations for refurbishment projects or for small hydro projects are not in the scope of this document. An agreement between all parties is necessary. This document excludes matters of purely commercial interest, except those inextricably bound up with the conduct of installation. The tolerances in this document have been established upon best practices and experience, although it is recognized that other standards specify different tolerances. Wherever this document specifies that documents, drawings or information is supplied by a manufacturer (or manufacturers), each individual manufacturer will furnish the appropriate information for their own supply only.
Leitfaden für Installations-Prozeduren und -Toleranzen von hydroelektrischen Maschinen – Teil 1: Generelle Aspekte
Lignes directrices des procédures et tolérances d'installation des machines hydroélectriques - Partie 1: Aspects généraux
IEC 63132-1:2020 L’objectif de la présente partie de l'IEC 63132 est d’établir, d’une façon générale, des procédures et des tolérances adéquates pour l’installation des turbines et alternateurs hydroélectriques. Ce document présente un assemblage typique. Il y a plusieurs façons possibles pour assembler un groupe. Les dimensions des machines, la conception des machines, le plan de la centrale et l’échéancier des livraisons des différentes composantes sont quelques éléments qui peuvent résulter en l’ajout d’étapes, l’élimination des certaines étapes et/ou des séquences d’assemblages. Il est entendu que ce type de document sera contraignant seulement si, et dans la mesure où, les deux parties contractuelles l’ont convenu. Les installations pour les projets de réfections et pour les projets hydroélectriques compact ne font pas partie du domaine d’application de ce document. Un accord entre les différents parties est nécessaire. Ce document exclut les questions d’intérêt purement commercial, sauf celles inextricablement liées au déroulement de l’installation. Les tolérances mentionnées dans ce document ont été déterminées selon les meilleures pratiques et l’expérience, bien qu’il soit reconnu que d’autres normes spécifient des tolérances différentes. Partout où ce document précise que des documents, des dessins ou des renseignements sont fournis par un fabricant (ou par des fabricants), chaque fabricant fournira les informations appropriées pour leur propre approvisionnement seulement.
Navodila za postopke vgradnje in tolerance hidroelektričnih strojev - 1.del: Splošni vidiki (IEC 63132-1:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2020
Navodila za postopke vgradnje in tolerance hidroelektričnih strojev - 1.del: Splošni
vidiki (IEC 63132-1:2020)
Guidance for installation procedures and tolerances of hydroelectric machines - Part 1:
General aspects (IEC 63132-1:2020)
Leitfaden für Installations-Prozeduren und -Toleranzen von hydroelektrischen Maschinen
– Teil 1: Generelle Aspekte (IEC 63132-1:2020)
Lignes directrices des procédures et tolérances d'installation des machines
hydroélectriques - Partie 1: Aspects généraux (IEC 63132-1:2020)
Ta slovenski standard je istoveten z: EN IEC 63132-1:2020
ICS:
27.140 Vodna energija Hydraulic energy engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 63132-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 27.140
English Version
Guidance for installation procedures and tolerances of
hydroelectric machines - Part 1: General aspects
(IEC 63132-1:2020)
Lignes directrices des procédures et tolérances Leitfaden für Installations-Prozeduren und -Toleranzen von
d'installation des machines hydroélectriques - Partie 1: hydroelektrischen Maschinen - Teil 1: Generelle Aspekte
Aspects généraux (IEC 63132-1:2020)
(IEC 63132-1:2020)
This European Standard was approved by CENELEC on 2020-05-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63132-1:2020 E
European foreword
The text of document 4/380/FDIS, future edition 1 of IEC 63132-1, prepared by IEC/TC 4 "Hydraulic
turbines" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-25
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63132-1:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60034-1:2017 NOTE Harmonized as EN 60034-1:— (not modified)
IEC 60034-7:1992 NOTE Harmonized as EN 60034-7:1993 (not modified)
IEC 60193:2019 NOTE Harmonized as EN IEC 60193:2019 (not modified)
IEC 62097:2019 NOTE Harmonized as EN IEC 62097:2019 (not modified)
IEC 63132-2 NOTE Harmonized as EN IEC 63132-2
IEC 63132-3 NOTE Harmonized as EN IEC 63132-3
IEC 63132-4 NOTE Harmonized as EN IEC 63132-4
To be published. Stage at the time of publication: FprEN 60034-1:2017.
IEC 63132-1 ®
Edition 1.0 2020-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Guidance for installation procedures and tolerances of hydroelectric machines –
Part 1: General aspects
Lignes directrices des procédures et tolérances d’installation des machines
hydroélectriques –
Partie 1: Aspects généraux
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.140 ISBN 978-2-8322-8101-7
– 2 – IEC 63132-1:2020 © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Concept . 6
4.1 General . 6
4.2 Reference centre . 7
4.3 Best centre . 7
4.4 Concentricity . 9
4.5 Circularity . 10
4.6 Reference horizontal plane . 11
4.7 Reference vertical plane . 11
4.8 Best fit plane . 11
4.9 Axis of rotation . 11
4.10 Junction . 11
4.11 Elevation . 12
4.12 Level . 13
4.13 Inclination . 13
4.14 Flatness in line . 14
4.15 Parallelism . 15
4.16 Orientation in plan . 16
4.17 Runner diameter . 16
4.18 Runner clearance . 17
4.19 Guide vane top clearance . 18
4.20 Guide vane bottom clearance . 19
4.21 Guide vane to guide vane clearance . 19
4.22 Shaft verticality . 19
4.23 Stator core verticality . 20
4.24 Rotor pole verticality . 21
4.25 Stator magnetic centre . 22
4.26 Rotor magnetic centre . 22
4.27 Diameter of stator core (D ) . 23
SC
4.28 Runout . 23
4.29 Shaft straightness . 24
4.30 Turbine/generator supplier . 25
5 Best practices . 25
Bibliography . 26
Figure 1 – Axes definition for vertical units . 7
Figure 2 – Best centre sample calculation . 9
Figure 3 – Concentricity . 10
Figure 4 – Circularity . 11
Figure 5 – Junction . 12
Figure 6 – Elevation . 13
Figure 7 – Level . 13
IEC 63132-1:2020 © IEC 2020 – 3 –
Figure 8 – Inclination . 14
Figure 9 – Flatness in line . 15
Figure 10 – Parallelism . 15
Figure 11 – Orientation in plan . 16
Figure 12 – Cases of runner diameters . 17
Figure 13 – Runner clearance . 18
Figure 14 – Guide vane top and bottom clearances. 19
Figure 15 – Guide vane to guide vane clearance. 19
Figure 16 – Shaft verticality . 20
Figure 17 – Stator core verticality . 21
Figure 18 – Rotor pole verticality . 21
Figure 19 – Stator magnetic centre . 22
Figure 20 – Rotor magnetic centre . 23
Figure 21 – Runout . 24
Figure 22 – Shaft straightness . 25
Table 1 – Sample calculation . 8
– 4 – IEC 63132-1:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
GUIDANCE FOR INSTALLATION PROCEDURES
AND TOLERANCES OF HYDROELECTRIC MACHINES –
Part 1: General aspects
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.