EN 61000-4-17:1999/A1:2004
(Amendment)Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
Subclause 8.1.1 (Climatic conditions) and clause 9 (Evaluation of test results) have been amended. Contains a new clause 10 (Test report).
Elektromagnetische Verträglichkeit (EMV) - Teil 4-17: Prüf- und Meßverfahren - Prüfung der Störfestigkeit gegen Wechselanteile der Spannung an Gleichstrom-Netzanschlüssen
Compatibilité électromagnétique (CEM) - Partie 4-17: Techniques d'essai et de mesure - Essai d'immunité à l'ondulation résiduelle sur entrée de puissance à courant continu
Le paragraphe 8.1.1 (Conditions climatiques) et l'article 9 (Evaluation des résultats d'essai) ont été modifiés. Contient un nouvel article 10 (Rapport d'essai).
Elektromagnetna združljivost (EMC) - 4-17. del: Preskušanje in merilne tehnike - Preskušanje odpornosti proti valovitosti pri napajalnem vhodu za enosmerno napetost - Dopolnilo 1 (IEC 61000-4-17:1999/A1:2001)
General Information
Relations
Overview
EN 61000-4-17:1999/A1:2004 is a European standard under the Electromagnetic Compatibility (EMC) framework, published by CLC and aligned with IEC 61000-4-17:1999/A1:2001. This standard defines testing and measurement techniques specifically addressing the ripple immunity on direct current (d.c.) input power ports of electrical and electronic equipment. The amendment A1 introduces updates to climatic conditions in testing environments, evaluation criteria for test results, and mandates comprehensive test reporting.
Designed to ensure robust operation of equipment under ripple disturbances on the d.c. supply port, this standard plays a crucial role in product design, compliance testing, and quality assurance related to electromagnetic compatibility.
Key Topics
Scope and Amendments
The amendment revises Subclause 8.1.1 (Climatic conditions) and Clause 9 (Evaluation of test results), and adds a new Clause 10 (Test report).Climatic Conditions (8.1.1)
Tests must be performed under climatic conditions within operational limits specified by equipment manufacturers. Relative humidity should not cause condensation on the equipment under test (EUT) or test devices to ensure valid and reproducible results.Evaluation of Test Results (Clause 9)
Test outcomes are classified based on performance degradation:- Normal performance within specified limits
- Temporary performance loss recoverable without operator intervention
- Temporary loss requiring operator intervention
- Permanent loss or damage to hardware/software
These classifications guide manufacturers and purchasers in agreeing on acceptable EMC performance levels.
Test Reporting (Clause 10)
The test report must include full details to enable test reproducibility and transparency:- Identification of EUT and test equipment (brand, model, serial number)
- Environmental and operational conditions during testing
- Defined performance level and criteria
- Observed effects and their durations
- Pass/fail rationale based on agreed-upon criteria
- Specific use conditions required for compliance
Applications
EN 61000-4-17:1999/A1:2004 applies broadly to electrical and electronic devices powered from a d.c. input supply where ripple on the power line may impact system performance or reliability. Key application areas include:
- Power supplies and converters for industrial, automotive, and consumer electronics
- Telecommunications equipment operating with d.c. power inputs
- Renewable energy devices utilizing d.c. input power ports
- Control systems and instrumentation susceptible to power quality disturbances
- Compliance testing in EMC laboratories to validate immunity to power supply ripple
Adhering to this standard ensures products maintain functionality and resist degradation caused by ripple disturbances, minimizing downtime and enhancing user confidence.
Related Standards
This standard is part of the wider IEC 61000 series on electromagnetic compatibility testing and measurement techniques. Related standards include:
- EN 61000-4-2: Electrostatic discharge immunity test
- EN 61000-4-3: Radiated radio-frequency electromagnetic field immunity test
- EN 61000-4-6: Immunity to conducted disturbances induced by radio-frequency fields
- EN 61000-4-11: Voltage dips, short interruptions and voltage variations immunity test
Together, these form a comprehensive EMC testing framework, helping manufacturers comply with European and international EMC directives and regulations.
Keywords: Electromagnetic compatibility, EMC testing, ripple immunity test, d.c. input power port, EN 61000-4-17, CLC standard, EMC test report, climatic test conditions, electrical equipment immunity, power supply ripple disturbances.
Frequently Asked Questions
EN 61000-4-17:1999/A1:2004 is a amendment published by CLC. Its full title is "Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test". This standard covers: Subclause 8.1.1 (Climatic conditions) and clause 9 (Evaluation of test results) have been amended. Contains a new clause 10 (Test report).
Subclause 8.1.1 (Climatic conditions) and clause 9 (Evaluation of test results) have been amended. Contains a new clause 10 (Test report).
EN 61000-4-17:1999/A1:2004 is classified under the following ICS (International Classification for Standards) categories: 33.100.20 - Immunity. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 61000-4-17:1999/A1:2004 has the following relationships with other standards: It is inter standard links to EN 61000-4-17:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 61000-4-17:1999/A1:2004 is associated with the following European legislation: EU Directives/Regulations: 2004/108/EC, 2004/108/EU, 2014/30/EU, 89/336/EEC; Standardization Mandates: M/490. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 61000-4-17:1999/A1:2004 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI SIST EN 61000-4-
17:2001/A1:2004
STANDARD
september 2004
Elektromagnetna združljivost (EMC) - 4-17. del: Preskušanje in merilne
tehnike - Preskušanje odpornosti proti valovitosti pri napajalnem vhodu za
enosmerno napetost - Dopolnilo 1 (IEC 61000-4-17:1999/A1:2001)
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement
techniques - Ripple on d.c. input power port immunity test - Amendment 1 (IEC
61000-4-17:1999/A1:2001)
ICS 33.100.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 61000-4-17/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2004
ICS 33.100.20
English version
Electromagnetic compatibility (EMC)
Part 4-17: Testing and measurement techniques –
Ripple on d.c. input power port immunity test
(IEC 61000-4-17:1999/A1:2001)
Compatibilité électromagnétique (CEM) Elektromagnetische Verträglichkeit (EMV)
Partie 4-17: Techniques d'essai Teil 4-17: Prüf- und Meßverfahren -
et de mesure – Prüfung der Störfestigkeit gegen
Essai d'immunité à l'ondulation résiduelle Wechselanteile der Spannung
sur entrée de puissance à courant continu an Gleichstrom-Netzanschlüssen
(CEI 61000-4-17:1999/A1:2001) (IEC 61000-4-17:1999/A1:2001)
This amendment A1 modifies the European Standard EN 61000-4-17:1999; it was approved by
CENELEC on 2004-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this amendment the status of a national standard without
any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-4-17:1999/A1:2004 E
Foreword
The text of amendment 1:2001 to the International Standard IEC 61000-4-17:1999, prepared by
SC 77B, High frequency phenomena, of IEC TC 77, Electromagnetic compatibility, was submitted to
the Unique Acceptance Procedure and was approved by CENELEC as amendment A1 to
EN 61000-4-17:1999 on 2004-05-01 without any modification.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-05-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2007-05-01
__________
Endorsement notice
The text of amendment 1:2001 to the International Standard IEC 61000-4-17:1999 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
NORME CEI
INTERNATIONALE IEC
61000-4-17
INTERNATIONAL
STANDARD
AMENDEMENT 1
AMENDMENT 1
2001-07
PUBLICATION FONDAMENTALE EN CEM
BASIC EMC PUBLICATION
Amendement 1
Compatibilité électromagnétique (CEM) –
Partie 4-17:
Techniques d’essai et de mesure –
Essai d’immunité à l'ondulation résiduelle
sur entrée de puissance à courant continu
Amendment 1
Electromagnetic compatibility (EMC) –
Part 4-17:
Testing and measurement techniques –
Ripple on d.c. input power port immunity test
IEC 2001 Droits de reproduction réservés Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e
...
The article discusses the amendment to the EN 61000-4-17:1999/A1:2004 standard, which is focused on electromagnetic compatibility (EMC) and testing techniques. Specifically, subclause 8.1.1 regarding climatic conditions and clause 9 regarding the evaluation of test results have been updated. Additionally, a new clause 10 has been added, which pertains to the test report.
기사 제목: EN 61000-4-17:1999/A1:2004 - 전자파 호환성 (EMC) - 제 4-17부: 시험 및 측정 기술 - 직류 입력 전원단자 면역시험에 나타나는 이양(ripple)에 대한 변경 기사 내용: 서브클로즈 8.1.1 (기후 조건)과 9조 (시험 결과의 평가)가 수정되었습니다. 새로운 10조 (시험 보고서)도 포함되어 있습니다.
記事のタイトル：EN 61000-4-17:1999/A1:2004 - 電磁両立性（EMC）- 第4-17部：試験および測定技術- 直流入力電源ポートのリップル免疫試験 記事の内容：サブクローズ8.1.1（気候条件）と条項9（試験結果の評価）が変更されました。新しい条項10（試験報告書）が含まれています。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...