CLC IEC/TS 62271-320:2025

SLOVENSKI STANDARD
01-februar-2026
Visokonapetostne stikalne in krmilne naprave - 320. del: Okoljski vidiki in pravila
za ocenjevanje življenjskega cikla visokonapetostnih stikalnih in krmilnih naprav
(IEC/TS 62271-320:2025)
High-voltage switchgear and controlgear - Part 320: Environmental aspects and life cycle
assessment rules for high-voltage switchgear and controlgear (IEC/TS 62271-320:2025)
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 320: Umweltaspekte und
Ökobilanz für Hochspannungs-Schaltgeräte und -Schaltanlagen (IEC/TS 62271-
320:2025)
Appareillage haute tension - Partie 320: Aspects environnementaux et règles
d’évaluation du cycle de vie des appareillages haute tension (IEC/TS 62271-320:2025)
Ta slovenski standard je istoveten z: CLC IEC/TS 62271-320:2025
ICS:
13.020.30 Ocenjevanje vpliva na okolje Environmental impact
assessment
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION CLC IEC/TS 62271-320

SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION December 2025
ICS 13.020.30; 29.130.10
English Version
High-voltage switchgear and controlgear - Part 320:
Environmental aspects and life cycle assessment rules for high-
voltage switchgear and controlgear
(IEC/TS 62271-320:2025)
Appareillage haute tension - Partie 320: Aspects Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil
environnementaux et règles d'évaluation du cycle de vie 320: Umweltaspekte und Ökobilanz für Hochspannungs-
des appareillages haute tension Schaltgeräte und -Schaltanlagen
(IEC/TS 62271-320:2025) (IEC/TS 62271-320:2025)
This Technical Specification was approved by CENELEC on 2025-12-08.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. CLC IEC/TS 62271-320:2025 E

European foreword
This document (CLC IEC/TS 62271-320:2025) consists of the text of IEC/TS 62271-320:2025 prepared
by IEC/TC 17 "High-voltage switchgear and controlgear".
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Technical Specification/Technical Report IEC/TS 62271-320:2025 was
approved by CENELEC as a European Technical Specification/Technical Report without any
modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 62271-3 NOTE Approved as EN 62271-3
IEC/TS 62271-5:2024 NOTE Approved as CLC IEC/TS 62271-5:2025 (not modified)
IEC 62271-102 NOTE Approved as EN IEC 62271-102
IEC 62271-103 NOTE Approved as EN IEC 62271-103
IEC 62271-104 NOTE Approved as EN IEC 62271-104
IEC 62271-105 NOTE Approved as EN IEC 62271-105
IEC 62271-106 NOTE Approved as EN IEC 62271-106
IEC 62271-107 NOTE Approved as EN IEC 62271-107
IEC 62271-108 NOTE Approved as EN IEC 62271-108
IEC 62271-109 NOTE Approved as EN IEC 62271-109
IEC 62271-110 NOTE Approved as EN IEC 62271-110
IEC 62271-112 NOTE Approved as EN IEC 62271-112
IEC 62271-200 NOTE Approved as EN IEC 62271-200
IEC 62271-201 NOTE Approved as EN 62271-201
IEC 62271-203 NOTE Approved as EN IEC 62271-203
IEC 62271-204 NOTE Approved as EN IEC 62271-204
IEC 62271-205 NOTE Approved as EN 62271-205
IEC 62960 NOTE Approved as EN IEC 62960
IEC 62474 NOTE Approved as EN IEC 62474
IEC 63000 NOTE Approved as EN IEC 63000
ISO 14001:2015 NOTE Approved as EN ISO 14001:2015 (not modified)
ISO 14006 NOTE Approved as EN ISO 14006
ISO 14021:2016 NOTE Approved as EN ISO 14021:2016 (not modified)
ISO 14024:2018 NOTE Approved as EN ISO 14024:2018 (not modified)
ISO 14025:2006 NOTE Approved as EN ISO 14025:2010 (not modified)
ISO 14040:2006 NOTE Approved as EN ISO 14040:2006 (not modified)
ISO 14044:2006 NOTE Approved as EN ISO 14044:2006 (not modified)
ISO 14051 NOTE Approved as EN ISO 14051
ISO 14052 NOTE Approved as EN ISO 14052
ISO 14067:2018 NOTE Approved as EN ISO 14067:2018 (not modified)
ISO 18064 NOTE Approved as EN ISO 18064
ISO 9000:2015 NOTE Approved as EN ISO 9000:2015 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 62271-1 - High-voltage switchgear and controlgear - EN 62271-1 -
Part 1: Common specifications for
alternating current switchgear and
controlgear
IEC 62271-4 2022 High-voltage switchgear and controlgear - EN IEC 62271-4 2022
Part 4: Handling procedures for gases for
insulation and/or switching
IEC TS 62271-320 ®
Edition 1.0 2025-03
TECHNICAL
SPECIFICATION
High-voltage switchgear and controlgear –

Part 320: Environmental aspects and life cycle assessment rules for high-

voltage switchgear and controlgear

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 13.020.30; 29.130.10 ISBN 978-2-8327-0293-2

– 2 – IEC TS 62271-320:2025 © IEC 2025
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 9
3.1 Switchgear and controlgear . 10
3.2 Environmental aspects . 11
3.3 Index of definitions . 21
3.4 Abbreviated terms . 23
4 Description and classification of high-voltage switchgear and controlgear
(SG&CG) . 24
4.1 General . 24
4.2 Description and classification of switching devices . 24
4.3 Description and classification of assemblies . 25
5 Environmentally conscious design . 26
5.1 General . 26
5.2 Life cycle thinking . 29
5.3 Reference service life . 31
5.3.1 General . 31
5.3.2 Service use conditions . 31
5.4 Material circularities . 32
6 PSR for life cycle assessment . 32
6.1 General . 32
6.2 Product specific rules (PSR) . 32
6.3 Inputs . 33
6.4 Outputs . 35
6.5 Qualitative and quantitative assessments. 35
6.6 LCA functional unit (LCA-FU) . 35
6.6.1 General . 35
6.6.2 LCA functional unit(s) for switching devices . 36
6.6.3 LCA standard functional unit for assemblies . 47
6.7 System boundaries . 56
6.7.1 General . 56
6.7.2 Material circularities . 58
6.7.3 Exclusions from system boundary . 60
6.7.4 Cut-off rules for SG&CG . 60
6.8 Life cycle inventory analysis . 61
6.8.1 General . 61
6.8.2 Manufacturing . 61
6.8.3 Distribution . 61
6.8.4 Installation . 62
6.8.5 Use . 62
6.8.6 End-of-life . 62
6.9 Scenarios . 63
6.9.1 General . 63
6.9.2 Insulation and/or switching medium emissions aspects . 63

IEC TS 62271-320:2025 © IEC 2025 – 3 –
6.9.3 Manufacturing and installation scenario . 66
6.9.4 Distribution scenario . 66
6.9.5 Use scenario . 67
6.9.6 End-of-life scenarios . 72
6.10 Impact categories . 76
6.11 Guidance for extrapolation of LCA results within a homogenous product
family . 78
6.12 LCA comparison aspects . 79
7 Information . 79
7.1 General . 79
7.2 Material declaration . 80
7.2.1 General . 80
7.2.2 Additional reporting recommendations . 80
7.3 End-of-life information . 81
7.3.1 General . 81
7.3.2 End-of-life information provision . 81
7.4 Digitization of high-voltage switchgear and controlgear and information
related to LCA . 81
7.5 LCA report . 82
7.5.1 General . 82
7.5.2 General information . 82
7.5.3 Goal and scope of the study . 83
7.5.4 Life cycle inventory analysis . 83
7.5.5 Environmental impact assessment . 83
7.5.6 Additional environmental information . 84
Annex A (informative) Environmental aspects in environmentally conscious design . 85
A.1 General . 85
A.2 Inputs and outputs to be considered . 85
A.2.1 General . 85
A.2.2 Inputs . 85
A.2.3 Outputs. 86
A.3 Tools for including environmental impacts in high-voltage switchgear and
controlgear design . 86
Annex B (informative) Brief introduction to life cycle assessment (LCA) . 88
B.1 General . 88
B.2 Definition of the goal and scope of the LCA . 88
B.3 Inventory analysis . 89
B.4 Impact assessment . 89
B.5 Interpretation . 90
Annex C (informative) Environmental impact criteria . 91
C.1 General . 91
C.2 Sustainable development goals (SDGs) and environmental impact category . 91
Annex D (informative) Equivalent energy mix – Example of calculation . 101
D.1 Hypothesis . 101
D.2 Example. 101
Bibliography . 105

Figure 1 – Overview of the defined product families SG&CG within the scope of this
document . 25

– 4 – IEC TS 62271-320:2025 © IEC 2025
Figure 2 – General relationship between environmental aspects and associated
impacts for SG&CG during their life cycle . 27
Figure 3 – Example of system diagram of the whole life cycle for life cycle assessment

of SG&CG . 30
Figure 4 – Functional description for IEC 62271-109 AC by-pass switches > 52 kV . 47
Figure 5 – Functional description for IEC/IEEE 62271-37-013 Generator circuit-
breakers ≤ 38 kV . 47
Figure 6 – Scheme of the analysed product system's boundaries, including the life
cycle stages and unit processes, which separate it from the ecosphere (natural

environment) (based on IEC 63366:—, Figure 2) . 58
Figure 7 – Upstream and downstream product information . 79
Figure C.1 – Life cycle impact assessment, from inventory to category endpoints . 91
Figure C.2 – Life cycle impact assessment, from inventory to category midpoints . 92
Figure C.3 – Relation between LCA impact categories (endpoints) and sustainable
development goals . 93

Table 1 – Abbreviated terms . 23
Table 2 – Overview of the referenced standards, structure, content and the
corresponding clauses/subclauses of this document . 28
Table 3 – Examples of typical average environmental intended use conditions of
SG&CG . 31
Table 4 – Typical LCA-functional unit properties of switching devices . 37
Table 5 – Typical LCA-functional unit properties of assemblies . 49
Table 6 – Formulas for calculating the net benefits and loads beyond the system
boundaries . 59
Table 7 – Calculation of emissions during the use life cycle stage including refilling
and maintenance, if applicable . 64
Table 8 – Typical emissions factors in per unit SGCG and by life cycle stage . 66
Table 9 – Recommended scenarios for IED for use phase . 67
Table 10 – Typical scenarios for switchgear and controlgear switching devices . 68
Table 11 – Typical use scenarios for calculating impacts of assemblies . 69
Table 12 – Typical load conditions for assemblies. 69
Table 13 – Further explanation of the generic EoL treatment scenario . 74
Table 14 – Recommended impact categories in LCA studies or reported in
environmental declarations for SG&CG . 77
Table 15 – Additional parameters to be considered in the environmental declaration
per functional/reference unit . 77
Table C.1 – Detailed environmental impact criteria . 94
Table D.1 – Energy mix by location . 101
Table D.2 – Parts manufacturing mass ratio and use unit ratio . 102
Table D.3 – Equivalent energy mixes for manufacturing . 103
Table D.4 – Equivalent energy mixes for installation, use and EoL . 104
Table D.5 – Equivalent energy mixes by life cycle stages . 104

IEC TS 62271-320:2025 © IEC 2025 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR –

Part 320: Environmental aspects and life cycle assessment rules
for high-voltage switchgear and controlgear

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC TS 62271-320 has been prepared by IEC technical committee 17: High-voltage switchgear
and controlgear. It is a Technical Specification.
The text of this Technical Specification is based on the following documents:
Draft Report on voting
17/1161/DTS 17/1169/RVDTS
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Technical Specification is English.

– 6 – IEC TS 62271-320:2025 © IEC 2025
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
A list of all parts in the IEC 62271 series, published under the general title High-voltage
switchgear and controlgear, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
IEC TS 62271-320:2025 © IEC 2025 – 7 –
INTRODUCTION
Increasingly there is a focus on preserving the natural environment for the good of future
generations. For this to be achieved, efficient use of energy and materials throughout the life
cycle of every product when used in a system and process to conserve the world's finite natural
resources is essential. In addition, it is essential that the release of substances and materials
that might be harmful for the environment or induce climatic changes be avoided or minimized.
From concept to end-of-life of a product, the environmental impact of all the relevant processes
should be considered, including the circularities of materials for their future life such as how
materials are disposed of or recovered.
In order to contribute to conserving natural resources, manufacturers of high-voltage switchgear
and controlgear and their assemblies should ensure an environmentally conscious design (ECD)
involving:
a) phasing-out or minimizing the use of hazardous substances or materials;
b) efficient use of energy and materials in the manufacture of products;
c) ensuring the lowest practical energy consumption by the products while they are in use;
d) ensuring a dependability performance consideration in relation to the reference service life
and associated conditions;
e) at the end-of-product life, as far as practical, the design should enable recovery of materials
for future use and sorting hazardous components requiring a specific treatment.
As this approach considers the use of high-voltage switchgear and controlgear in systems, this
document contributes to conserving natural resources by users.
Declarations and ECD are increasingly required. This document recommends type III
environmental declarations in accordance with ISO 14025 and material declarations (MD) in
accordance with IEC 62474. In some businesses, green public procurement (GPP) is applicable
and/or ECD is part of the ISO 14001 certification. Some countries and regions are also actively
pushing for environmental conservation, for example, the European Union through its
Ecodesign for Sustainable product regulations (ESPR, Regulation EU 2024/1781) and China
through Ecodesign and life cycle assessment initiatives. Systematic demands for ECD will be
required by most, if not all customers, in the medium term.
Assessing the environmental impact of high-voltage switchgear and controlgear and their
assemblies is part of an ECD process. ECD requires the identification, measurement and
reporting of particular impacts. IEC 62430 describes the basic principles of ECD, with the goal
of reducing the potential environmental impacts of products.
Stakeholders met along the life cycle of the switchgear and controlgear (suppliers,
manufacturers, carriers, contractors, users, recyclers) are continuing their efforts to reduce their
environmental footprint and to assess it as targeted by this document. A simplified means of
estimating the environmental impacts is essential together with readily available data to make
the stakeholder's, i.e., manufacturer's, contractor's, installer's, end user's and recycler's, task
of assessing environmental impacts at system level easier.
Product specific rules (PSR) for assessing the environmental impacts and providing appropriate
data for high-voltage switchgear and controlgear and their assemblies are among the purposes
of this document. These rules establish a common evaluation scheme of their environmental
impacts in terms of characterized impact indicators (e.g. carbon dioxide equivalents, ozone
depletion, etc.) over their whole life cycle.
The informative references are mentioned in bibliography. They are referred to in the text in
such a way that some or all of their content constitutes the most useful references for this
document. For dated references, only the edition cited applies. For undated references, the
latest edition of the referenced document (including any amendments) applies.

– 8 – IEC TS 62271-320:2025 © IEC 2025
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR –

Part 320: Environmental aspects and life cycle assessment rules
for high-voltage switchgear and controlgear

1 Scope
This part of IEC 62271 provides guidance to suppliers, manufacturers, users, and waste
operators of high-voltage switchgear and controlgear as well as their assemblies having a rated
voltage above 1 kV AC and 1,5 kV DC, together with their associated auxiliary equipment, on
environmentally conscious design, and on assessing environmental impacts when used in
systems. This document also gives guidance on effective communication of environmental
information throughout the entire life cycle.
This document provides guidance on the process and general aspects to select UN sustainable
development goals (UN sustainable development goals (SDG)), especially those dealing with
health and environmental impacts and their assessments, represented respectively by:
• SDG 3-Good Health and Well-being;
• SDG 6-Clean Water and Sanitation;
• SDG 7-Affordable and Clean Energy;
• SDG 12-Responsible Consumption and Production;
• SDG 13-Climate Action;
• SDG 14-Life Below Water;
• SDG 15-Life on Land.
This document gives guidance on the process and general aspects to implement
environmentally conscious product design (ECD) principles, as given in IEC 62430, essential
for high-voltage electrical power equipment and power control equipment.
This document gives guidance on executing the life cycle assessment (LCA) based on product
category rules (PCR) in accordance with IEC 63366, ISO 14040 and ISO 14044 and on applying
the Type III environmental declaration in accordance with ISO 14025, both for high-voltage
switchgear and controlgear. This guidance provides standardized product specific rules (PSR)
summarized as follows:
1) Common rules for the LCA process describing functional units, system boundaries, life cycle
inventory analysis, scenarios, environmental impact categories;
2) Common rules for communicating information about the presence of regulated substances
and the materials contained in the product, according to IEC 62474;
3) Common rules for communicating information about the end-of-life treatment of the product
including material efficiency.
This document does not address the environmental declaration programme, however it can be
used by program operators.
This document focuses on describing the LCA process referring to the functional unit, system
boundary, scenarios, etc.
IEC TS 62271-320:2025 © IEC 2025 – 9 –
Owing to variability of influencing factors, such as flows, allocations, not balanced and time-
stable energy mix under different programmes, equipment customization, durability related to
environmental conditions, it is not possible to compare two similar high-voltage switchgear and
controlgear analysed in different contexts.
This document does not address by-products from arcing which are generated in sufficiently
small quantities such that their environmental impact can be neglected. Any by-product
generated by arcing during the use of equipment is strongly dependent on operating conditions
and cannot a priori be qualified nor quantified. However, they are not expected to be released
in air and will be managed at end-of-life by a dedicated process.
EXAMPLE
During the use of high-voltage switchgear and controlgear the handlings of normally arced gas are covered by
IEC 62271-4. When the volume of gaseous by-product is below 1 % of normally arced gas, it is not considered
compared to the cut-off rules specified in this document. The scenarios related to the system boundary do not take
into account leakages from failures except if an agreement is reached on this between user and manufacturer (see
Table 7, item h).
Power transformers, low-voltage switchgear and controlgear, and the interconnections with
such equipment are not covered by this document. Therefore, assemblies according to
IEC 62271-202 or IEC 62271-212 comprising any of the above equipment are not within the
scope of this document.
This document supports material efficiency for circular economy. However, one of the major
issues related to remanufacturing is the consideration of used parts and product(s) while
regulatory requirements are applicable to new product. For high voltage switchgear and
controlgear and for this document remanufacturing is not considered avoiding any misalignment
for life cycle assessment.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 62271-1, High-voltage switchgear and controlgear – Part 1: Common specifications for
alternating current switchgear and controlgear
IEC 62271-4:2022, High-voltage switchgear and controlgear – Part 4: Handling procedures for
gases for insulation and/or switching
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62271-1 and the
following apply.
ISO and IEC maintain terminology databases for use in standardization at the following
addresses:
• IEC Electropedia: available at https://www.electropedia.org/
• ISO Online browsing platform: available at https://www.iso.org/obp

– 10 – IEC TS 62271-320:2025 © IEC 2025
3.1 Switchgear and controlgear
3.1.1
assembly
combination of switchgear and/or controlgear completely
assembled with all internal electrical and mechanical interconnections
[SOURCE: IEC 60050-441:1984, 441-12-01]
3.1.2
controlgear
general term covering switching devices and their combination with associated control,
measuring, protective and regulating equipment, also assemblies of such devices and
equipment with associated interconnections, accessories, enclosures and supporting
structures, intended in principle for the control of electric energy consuming equipment
[SOURCE: IEC 60050-441:1984, 441-11-03]
3.1.3
part
essential sub-assembly of the high-voltage or earthing circuits of an
assembly, which serves a specific function (e.g., circuit-breaker, disconnector, switch, fuse,
earthing switch, instrument transformer, bushing, busbar)
Note 1 to entry: The term "part" can be equivalent to switching device or any other part constituting an assembly or
a product in this document.
Note 2 to entry: In this document, the term "part" is neither an electronic component nor electronic part nor a piece
part, as defined by IEV 904-01-09. Electronic component can be a subset of a part as defined in this document.
3.1.4
product
high-voltage switchgear and controlgear
Note 1 to entry: Based on the definition given in ISO 9000:2015, 3.7.6, the term "product" for the purposes of this
document is also considered as the output of an organization that can be produced without any transaction taking
place between the organization and the customer.
3.1.5
switchgear
general term covering switching devices and their combination with associated control,
measuring, protective and regulating equipment, also assemblies of such devices and
equipment with associated interconnections, accessories, enclosures and supporting
structures, intended in principle for use in connection with generation, transmission, distribution
and conversion of electric energy
[SOURCE: IEC 60050-441:1984, 441-11-02]
3.1.6
switchgear and controlgear
general term covering switching devices and their combination with associated control,
measuring, protective and regulating equipment, also assemblies of such devices and
equipment with associated interconnections, accessories, enclosures and supporting structures
[SOURCE: IEC 60050-441:1984, 441-11-01]

IEC TS 62271-320:2025 © IEC 2025 – 11 –
3.2 Environmental aspects
3.2.1
declarable substance
DS
substance that meets specified criteria for reporting
Note 1 to entry: Criteria for declarable substances are within the IEC 62474 DSL.
[SOURCE: IEC 62474:2018, 3.5, modified – Note 1 modified to remove the reference to
Clause 5.]
3.2.2
declarable substance group
DSG
substance group that meets specified criteria for reporting
EXAMPLE Chromium (VI) compounds.
Note 1 to entry: Criteria for declarable substance groups are within the IEC 62474 DSL.
[SOURCE: IEC 62474:2018, 3.6, modified – Note 1 modified to remove the reference to
Clause 5.]
3.2.3
dependability
ability to perform as and when required
Note 1 to entry: Dependability includes availability (192-01-23), reliability (192-01-24), recoverability (192-01-25),
maintainability (192-01-27), and maintenance support performance (192-01-29), and, in some cases, other
characteristics such as durability, safety and security.
Note 2 to entry: Dependability is used as a collective term for the time-related quality characteristics of an item.
[SOURCE: IEC 60050-192:2015, 192-01-22]
3.2.4
discard
action to get rid of something that you no longer want or need
Note 1 to entry: The term "discard" does not consider the notion of change of ownership, such as when waste is
disposed.
3.2.5
durability
ability to function as required, under defined conditions of use,
maintenance and repair, until a final limiting state is reached
Note 1 to entry: The degree to which maintenance and repair are within scope of durability will vary by product or
product group.
Note 2 to entry: Durability can be expressed in units appropriate to the part or product concerned, e.g. calendar
time, operating cycles, distance run, etc. The applicable unit should always be clearly stated.
[SOURCE: ISO 14009:2020, 3.2.24, modified – The word "final" has been added to the
definition and in Note 2, the term "units" is replaced by "applicable unit".]

– 12 – IEC TS 62271-320:2025 © IEC 2025
3.2.6
end of life
life cycle stage of a product starting when it is removed from its intended use phase
[SOURCE: IEC 60050-904:2014, 904-01-17, modified – The term "use-stage" is replaced with
"use phase".]
3.2.7
end of life treatment
any operation on discarded product and part including, dismantling from the installation,
disassembly, dismantling into parts, reuse part, material separation, material recycling, energy
recovery and residue disposal
[SOURCE: IEC TR 62635:2012, 3.3, modified – "after a waste has been handed over to a facility
for" has been replaced by "discarded product and part" and operations have been listed
avoiding the different meanings of "dismantling".]
3.2.8
energy recovery
production of useful energy through direct and controlled combustion or other processing of
waste
Note 1 to entry: Waste incinerators producing hot water, steam and/or electricity are common means for energy
recovery.
[SOURCE: IEC 60050-904:2014, 904-04-03]
3.2.9
environment
surroundin
...