EN IEC 62271-215:2021
(Main)High-voltage switchgear and controlgear - Part 215: Phase comparator used with VDIS
High-voltage switchgear and controlgear - Part 215: Phase comparator used with VDIS
IEC 62271-215:2021 is applicable to phase comparators designed to be plugged into the testing points of a voltage detecting and indicating system (VDIS) according to IEC 62271-213, to give an indication of the result of a phase comparison. The main usage is to provide a clear evidence of the phase relationship between two energized parts of a high-voltage network, at the same nominal voltage and frequency before coupling them. This first edition cancels and replaces the first edition of IEC 61243-5 published in 1997 and the first edition of IEC 62271-206 published in 2011. This edition constitutes a merging of the content of IEC 61243-5 and IEC 62271-206. This edition includes the following significant technical changes with respect to the previous editions of IEC 61243-5 and IEC 62271-206:
the document does not include the specific phase comparators (SPCs) as defined in IEC 61243-5, which was specific to manufacturers, and takes back the technical principles of the universal phase comparator (UPC) for VDIS of all manufacturers;
the phase comparator for sequential connected operation is introduced to facilitate the operation of phase comparation of large MV panels.
Hochspannungs-Schaltgeräte und -Schaltanlagen – Teil 215: Phasenvergleicher in Kombination mit einem Spannungsprüf- und -anzeigegerät
Appareillage à haute tension - Partie 215: Comparateur de phase utilisé avec un VDIS
L’IEC 62271-215:2021 s’applique aux comparateurs de phase conçus pour être enfichés dans les points de contrôle d’un système détecteur et indicateur de tension (VDIS), conformément à l’IEC 62271-213, pour donner une indication du résultat d’une comparaison de phase. La principale utilisation est de fournir une preuve indiscutable de la concordance de phase entre deux parties actives d’un réseau à haute tension, qui sont à la même tension nominale et la même fréquence nominale, avant de les coupler. Cette première édition annule et remplace la première édition de l’IEC 61243-5 parue en 1997 et la première édition de l’IEC 62271-206 parue en 2011. Cette édition est issue de la fusion de l’IEC 61243-5 et de l’IEC 62271-206. Cette édition inclut les modifications techniques majeures suivantes par rapport aux éditions précédentes de l’IEC 61243-5 et l’IEC 62271-206:
le document n’inclut pas les comparateurs de phase spécifiques (SPC- specific phase comparator) définis dans l’IEC 61243-5, qui étaient spécifiques aux constructeurs, et reprend les principes techniques du comparateur de phase universel (UPC – universal phase comparator) pour les VIDS de tous les constructeurs;
le comparateur de phase pour un fonctionnement à raccordement séquentiel est instauré afin de faciliter la mise en œuvre de la comparaison de phase des grands panneaux MT.
Visokonapetostne stikalne in krmilne naprave - 215. del: Fazni primerjalnik, uporabljen z VDIS (IEC 62271-215:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2021
Visokonapetostne stikalne in krmilne naprave - 215. del: Fazni primerjalnik,
uporabljen z VDIS (IEC 62271-215:2021)
High-voltage switchgear and controlgear - Part 215: Phase comparator used with VDIS
(IEC 62271-215:2021)
Hochspannungs-Schaltgeräte und -Schaltanlagen – Teil 215: Phasenvergleicher (IEC
62271-215:2021)
Appareillage à haute tension - Partie 215: Comparateur de phase utilisé avec un VDIS
(IEC 62271-215:2021)
Ta slovenski standard je istoveten z: EN IEC 62271-215:2021
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62271-215
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2021
ICS 13.260; 29.130.10; 29.240.20
English Version
High-voltage switchgear and controlgear - Part 215: Phase
comparator used with VDIS
(IEC 62271-215:2021)
Appareillage à haute tension - Partie 215: Comparateur de Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil
phase utilisé avec un VDIS 215: Phasenvergleicher in Kombination mit einem
(IEC 62271-215:2021) Spannungsprüf- und -anzeigegerät
(IEC 62271-215:2021)
This European Standard was approved by CENELEC on 2021-08-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62271-215:2021 E
European foreword
The text of document 17C/788/FDIS, future edition 1 of IEC 62271-215, prepared by SC 17C
“Assemblies” of IEC/TC 17 “High-voltage switchgear and controlgear” was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62271-215:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–05–03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–08–03
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62271-215:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61481-1:2014 NOTE Harmonized as EN 61481-1:2014 (not modified)
IEC 61481-2:2014 NOTE Harmonized as EN 61481-2:2014 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60060-1 - High-voltage test techniques - Part 1: EN 60060-1 -
General definitions and test requirements
IEC 60068-2-1 2007 Environmental testing - Part 2–1: Tests - EN 60068-2-1 2007
Test A: Cold
IEC 60068-2-2 2007 Environmental testing - Part 2–2: Tests - EN 60068-2-2 2007
Test B: Dry heat
IEC 60068-2-6 - Environmental testing - Part 2–6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-31 - Environmental testing - Part 2–31: Tests - EN 60068-2-31 -
Test Ec: Rough handling shocks, primarily
for equipment-type specimens
IEC 60068-2-38 - Environmental testing - Part 2–38: Tests - EN IEC 60068-2-38 -
Test Z/AD: Composite
temperature/humidity cyclic test
IEC 60417 - Graphical symbols for use on equipment - -
IEC 60529 - Degrees of protection provided by - -
enclosures (IP Code)
IEC 61000-4-2 - Electromagnetic compatibility (EMC) - Part EN 61000-4-2 -
4–2: Testing and measurement techniques
- Electrostatic discharge immunity test
IEC 61000-4-3 - Electromagnetic compatibility (EMC) - Part EN IEC 61000-4-3 -
4–3: Testing and measurement techniques
- Radiated, radio-frequency,
electromagnetic field immunity test
IEC 61000-4-5 - Electromagnetic compatibility (EMC) - Part EN 61000-4-5 -
4–5: Testing and measurement techniques
- Surge immunity test
IEC 62262 - Degrees of protection provided by EN 62262 -
enclosures for electrical equipment against
external mechanical impacts (IK code)
IEC 62271-1 - High-voltage switchgear and controlgear - EN 62271-1 -
Part 1: Common specifications
IEC 62271-213 - High-voltage switchgear and controlgear - - -
Part 213: Voltage detecting and indicating
system
IEC 62271-215 ®
Edition 1.0 2021-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
High-voltage switchgear and controlgear –
Part 215: Phase comparator used with VDIS
Appareillage à haute tension –
Partie 215: Comparateur de phase utilisé avec un VDIS
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.260; 29.130.10; 29.240.20 ISBN 978-2-8322-9892-3
– 2 – IEC 62271-215:2021 IEC 2021
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
4 Normal and special service conditions . 13
4.1 Normal service conditions . 13
4.2 Special service conditions . 13
5 Ratings . 13
6 Design and construction . 13
6.1 General . 13
6.2 Parts of phase comparator . 13
6.3 Phase comparator description . 14
6.3.1 General . 14
6.3.2 Phase comparator for simultaneous connected operation . 14
6.3.3 Phase comparator for sequential connected operation . 15
6.4 Connection to VDIS . 15
6.5 Indication and perceptibility . 16
6.5.1 General . 16
6.5.2 Phase comparator providing only one active signal . 17
6.5.3 Phase comparator providing two or more active signals . 17
6.5.4 Indication of phase comparator with built-in power supply . 17
6.5.5 Indication of sequential phase comparators . 17
6.5.6 Response time of indication . 17
6.5.7 Perceptibility . 18
6.6 Phase comparator with built-in power supply . 18
6.7 Testing element . 18
6.8 Additional functions. 18
6.9 Probes . 18
6.10 Settings . 19
6.11 Tolerance of rated frequency . 20
6.12 Frequency shift of phase comparators with sequential operation . 20
6.13 Degree of protection (IP code) . 20
6.14 Climatic requirements . 20
6.14.1 General . 20
6.14.2 Temperature . 20
6.14.3 Composite temperature/humidity . 20
6.15 Mechanical requirements . 20
6.15.1 General . 20
6.15.2 Assembly . 20
6.15.3 Vibrations . 20
6.15.4 Mechanical impact (IK code) . 21
6.15.5 Fall . 21
6.16 Electromagnetic compatibility . 21
6.16.1 General . 21
6.16.2 Electrostatic discharge . 21
IEC 62271-215:2021 IEC 2021 – 3 –
6.16.3 Immunity against radiated electromagnetic fields . 21
6.17 Dielectric strength . 21
6.17.1 General . 21
6.17.2 Lightning impulse withstand voltage. 21
6.17.3 Power-frequency withstand voltage . 21
6.17.4 Insulation withstand voltage . 22
6.18 Marking . 22
7 Type tests . 22
7.1 General . 22
7.1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.