EN 60034-3:1995
(Main)Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines
Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines
Applies to three-phase turbine-type machines, with rated outputs of 10 MVA and above, used as generators.
Drehende elektrische Maschinen - Teil 3: Besondere Anforderungen an Dreiphasen-Turbogeneratoren
Machines électriques tournantes - Partie 3: Règles spécifiques pour les turbomachines synchrones
S'applique aux turbomachines triphasées de puissance assignée supérieure ou égale à 10 MVA, utilisées en alternateurs.
Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines (IEC 60034-3:1988)
General Information
- Status
- Withdrawn
- Publication Date
- 17-Oct-1995
- Withdrawal Date
- 17-Apr-1996
- Technical Committee
- CLC/TC 2 - Rotating machinery
- Drafting Committee
- IEC/TC 2 - IEC_TC_2
- Parallel Committee
- IEC/TC 2 - IEC_TC_2
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-May-2008
- Completion Date
- 01-May-2008
Relations
- Effective Date
- 29-Jan-2023
EN 60034-3:1999 - pri IEC-ju manjkajo strani:3, 7, 11, 15, 19, 23, 27, 31, 35, 39, 43, 45
Get Certified
Connect with accredited certification bodies for this standard
UL Solutions
Global safety science company with testing, inspection and certification.
CEPREI Certification Center (Guangzhou Saibao)
Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.
CESI Beijing Certification (Saisi)
Subsidiary of China Electronics Standardization Institute (CESI), established 1963.
Sponsored listings
Frequently Asked Questions
EN 60034-3:1995 is a standard published by CLC. Its full title is "Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines". This standard covers: Applies to three-phase turbine-type machines, with rated outputs of 10 MVA and above, used as generators.
Applies to three-phase turbine-type machines, with rated outputs of 10 MVA and above, used as generators.
EN 60034-3:1995 is classified under the following ICS (International Classification for Standards) categories: 29.160.20 - Generators. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60034-3:1995 has the following relationships with other standards: It is inter standard links to EN 60034-3:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60034-3:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines (IEC 60034-3:1988)Drehende elektrische Maschinen -- Teil 3: Besondere Anforderungen an Dreiphasen-TurbogeneratorenMachines électriques tournantes -- Partie 3: Règles spécifiques pour les turbomachines synchronesRotating electrical machines -- Part 3: Specific requirements for turbine-type synchronous machines29.160.20GeneratorjiGeneratorsICS:Ta slovenski st
...
SLOVENSKI STANDARD
01-april-1999
Rotating electrical machines - Part 3: Specific requirements for turbine-type
synchronous machines (IEC 60034-3:1988)
Rotating electrical machines -- Part 3: Specific requirements for turbine-type
synchronous machines
Drehende elektrische Maschinen -- Teil 3: Besondere Anforderungen an Dreiphasen-
Turbogeneratoren
Machines électriques tournantes -- Partie 3: Règles spécifiques pour les turbomachines
synchrones
Ta slovenski standard je istoveten z: EN 60034-3:1995
ICS:
29.160.20 Generatorji Generators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
Publication 60034-3 de la CEI IEC Publication 60034-3
(Quatrième édition) (Fourth edition)
Machines électriques tournantes – Rotating electrical machines –
Troisième partie: Règles spécifiques pour les Part 3: Specific requirements for turbine-type
turbomachines synchrones synchronous machines
CORRIGENDUM 1
Page 18 Page 19
Article 14: Clause 14:
Au lieu de Instead of
2 2
II−=t 37,s5 II−=t 37,s5
() ()
lire read
2 2
It−=137,s5 It−=137,s5
() ()
Page 20 Page 21
Article 16.1: Clause 16.1
Dans la première ligne, au lieu de In the first line, instead of
....dans les articles 18... ...in clauses 18...
lire read
....dans les articles 19... ...in clauses 19...
Décembre 1997 December 1997
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...