EN IEC 63032:2018

SLOVENSKI STANDARD
01-oktober-2018
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH1DVWDYOMLYLRSWLþQLSDVRYQR
SUHSXVWQLILOWUL6SORãQDVSHFLILNDFLMD,(&
Fibre optic interconnecting devices and passive components - Fibre optic tuneable
bandpass filters - Generic specification (IEC 63032:2018)
Ta slovenski standard je istoveten z: EN IEC 63032:2018
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63032

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2018
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Fibre optic tuneable bandpass filters - Generic specification
(IEC 63032:2018)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter-Verbindungselemente und passive
fibroniques - Filtres fibroniques passe-bande accordables - Bauteile - Abstimmbare LWL-Bandpassfilter -
Spécification générique Fachgrundspezifikation
(IEC 63032:2018) (IEC 63032:2018)
This European Standard was approved by CENELEC on 2018-06-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63032:2018 E
European foreword
The text of document 86B/4125/FDIS, future edition 1 of IEC 63032, prepared by SC 86B "Fibre optic
interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 63032:2018.

The following dates are fixed:
(dop) 2019-03-28
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-06-28
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 63032:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60869-1 NOTE Harmonized as EN 60869-1.
IEC 60875-1 NOTE Harmonized as EN 60875-1.
IEC 60876-1 NOTE Harmonized as EN 60876-1.
IEC 61202-1 NOTE Harmonized as EN 61202-1.
IEC 61978-1 NOTE Harmonized as EN 61978-1.
IEC 62074-1 NOTE Harmonized as EN 62074-1.
IEC 62077 NOTE Harmonized as EN 62077.
IEC 62099 NOTE Harmonized as EN 62099.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
IEC 60617-DB -  Graphical symbols for diagrams - -
IEC 60695-11-5 -  Fire hazard testing - EN 60695-11-5 -
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
IEC 60825-1 -  Safety of laser products - EN 60825-1 -
Part 1: Equipment classification and
requirements
IEC 61300 Series Fibre optic interconnecting devices and EN 61300 Series
passive components - Basic test and
measurement procedures
IEC/TR 61930 -  Fibre optic graphical symbology - -
IEC 61977 -  Fibre optic interconnecting devices and EN 61977 -
passive components - Fibre optic filters -
Generic specification
IEC/TS 62627-09 -  Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices
ISO 129 -  Technical drawings; Dimensioning; - -
General principles, definitions, methods of
execution and special indications
ISO 286-1 -  Geometrical product specifications (GPS) - EN ISO 286-1 -
ISO code system for tolerances on linear
sizes - Part 1: Basis of tolerances,
deviations and fits
ISO 1101 -  Geometrical product specifications (GPS) - EN ISO 1101 -
Geometrical tolerancing - Tolerances of
form, orientation, location and run-out
ISO 8601 -  Data elements and interchange formats - - -
Information interchange - Representation
of dates and times
IEC 63032 ®
Edition 1.0 2018-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fibre optic interconnecting devices and passive components – Fibre optic

tuneable bandpass filters – Generic specification

Dispositifs d'interconnexion et composants passifs fibroniques – Filtres

fibroniques passe-bande accordables – Spécification générique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-5748-7

– 2 – IEC 63032:2018 © IEC 2018
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Requirements . 11
4.1 Classification . 11
4.1.1 General . 11
4.1.2 Type . 11
4.1.3 Style . 11
4.2 Documentation . 12
4.2.1 Symbols . 12
4.2.2 Drawings . 12
4.2.3 Test and measurements . 13
4.2.4 Test report . 13
4.2.5 Instructions for use . 13
4.3 Standardisation system . 13
4.3.1 Performance standard . 13
4.3.2 Reliability standard . 14
4.3.3 Interlinking . 14
4.4 Design and construction . 15
4.4.1 Materials . 15
4.4.2 Workmanship . 15
4.5 Performance requirements . 16
4.6 Identification and marking . 16
4.6.1 General . 16
4.6.2 Component marking . 16
4.6.3 Package marking . 16
4.7 Packaging . 16
4.8 Storage conditions . 16
4.9 Safety . 17
Annex A (informative) General information of tuneable bandpass filters . 18
Annex B (informative) Examples of tuneable bandpass filter technologies . 19
B.1 Tuneable filter using thermo-optic effects . 19
B.2 Tuneable filter using acousto-optic effects . 20
B.3 Tuneable filter using mechanical effects . 20
B.4 Tuneable filter using piezoelectric effects . 21
Bibliography . 23

Figure 1 – Illustration of wavelength tuneable bandpass filter . 7
Figure 2 – Illustration of bandwidth tuneable bandpass filter . 8
Figure 3 – Illustration of wavelength and bandwidth tuneable bandpass filter . 8
Figure 4 – Illustration of insertion loss deviation of tuning . 9
Figure 5 – Illustration of X dB bandwidth deviation of wavelength tuning . 10
Figure 6 – Tuneable bandpass filter style configurations . 12
Figure B.1 – Thermally tuneable thin film filter . 19

IEC 63032:2018 © IEC 2018 – 3 –
Figure B.2 – Thermally tuneable waveguide Bragg grating . 19
Figure B.3 – Thermally tuneable fibre Bragg grating . 19
Figure B.4 – Acousto-optic tuneable bandpass filter . 20
Figure B.5 – Tuneable filter by changing the incident angle . 20
Figure B.6 – Tuneable filter by sliding the incident position . 21
Figure B.7 – MEMS tuneable filter . 21
Figure B.8 – Tuneable bandpass filter by gap control using piezoelectric effect . 22

Table 1 – IEC specification structure . 11
Table 2 – Standards interlink matrix . 15
Table 3 – Quality assurance options . 15

– 4 – IEC 63032:2018 © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE
COMPONENTS – FIBRE OPTIC TUNEABLE BANDPASS
FILTERS – GENERIC SPECIFICATION

FOREWORD
1) The
...