Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters

IEC 60079-35-2:2011 details those performance and other safety features of caplights, including those with a point of connection for another equipment, not covered in IEC 60079-35-1, but which are important for the safety and working conditions of the user. It may also be applied to caplights for use in mines not likely to be endangered by firedamp. This first edition of IEC 60079-35-2 cancels and replaces the second edition (2005) of IEC 62013-2 published in 2005 and constitutes a full technical revision. The general revision and updating of Edition 2 of IEC 62013-2 has been necessitated by the advent of new technologies related to caplight design, in particular those related light-emitting diode (LED) light sources. It is intended that there should be a stronger link between Part 1 (Construction) and Part 2 (Performance) of this Standard by upgrading the reference in the Scope of part 1 from a note to a requirement. In addition as this Standard is now to become one of the IEC 60079 series, changes have been made to bring it more in line with others in the series by cross referencing. This has enabled there to be a reduction in the number and length of clauses in the Standard.

Explosionsfähige Atmosphäre - Teil 35-2: Kopfleuchten für die Verwendung in schlagwettergefährdeten Grubenbauen - Gebrauchstauglich­keit und andere sicherheitsrelevante Themen

Atmosphères explosives - Partie 35-2: Lampes chapeaux utilisables dans les mines grisouteuses - Performances et autres sujets relatifs à la sécurité

La CEI 60079-35-2:2011 détaille les performances et les autres caractéristiques de sécurité des lampes-chapeaux, y compris de celles ayant un point de connexion pour un autre appareil, qui ne sont pas couvertes par la CEI 60079-35-1, mais qui sont importantes pour la sécurité et les conditions de travail de l'utilisateur. Elle peut aussi s'appliquer aux lampes-chapeaux utilisées dans les mines non grisouteuses. La présente première édition de la CEI 60079-35-2 annule et remplace la deuxième édition (2005) de la CEI 62013-2 publiée en 2005 dont elle constitue une révision technique complète. La révision générale et la mise à jour de l'édition 2 de la CEI 62013-2 sont devenues indispensables avec l'avènement des nouvelles technologies touchant la conception des lampes chapeaux, en particulier celles liées aux sources de lumière à diodes électroluminescentes (LED). Il est prévu de lier plus fortement la Partie 1 (Construction) et la Partie 2 (Performance) de la présente norme en modifiant le contenu du domaine d'application de la partie 1 de note en exigence. En outre, la présente norme ayant été intégrée à la série CEI 60079, des modifications ont été apportées dans un souci de plus grande cohérence avec les autres parties de la série par l'ajout de références croisées. Ceci a permis une réduction à la fois du nombre et de la longueur des articles de la présente norme.

Čeladne svetilke za uporabo v rudnikih, občutljive na jamski eksplozivni plin - 2. del: Tehnične lastnosti in druge varnostne zadeve (IEC 60079-35-2:2011)

Ta del standarda IEC 60079-35 obravnava te tehnične lastnosti in druge varnostne značilnosti čeladnih svetilk, vključno s tistimi s priključkom za drugo opremo, ki niso zajete v standardu IEC 60079-35-1, a so pomembne za varnost in delovne pogoje uporabnika. Uporablja se lahko tudi za čeladne svetilke za uporabo v rudnikih, za katere je malo verjetno, da bi jih ogrožal jamski eksplozivni plin.

General Information

Status
Published
Publication Date
09-Aug-2012
Withdrawal Date
10-Jan-2015
Current Stage
6060 - Document made available - Publishing
Start Date
10-Aug-2012
Completion Date
10-Aug-2012

Relations

Buy Standard

Standard
EN 60079-35-2:2012
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2012
1DGRPHãþD
SIST EN 62013-2:2006
ýHODGQHVYHWLONH]DXSRUDERYUXGQLNLKREþXWOMLYHQDMDPVNLHNVSOR]LYQLSOLQ
GHO7HKQLþQHODVWQRVWLLQGUXJHYDUQRVWQH]DGHYH ,(&
Caplights for use in mines susceptible to firedamp - Part 2: Performance and other safety
-related matters (IEC 60079-35-2:2011)
Explosionsfähige Atmosphäre - Teil 35-2: Kopfleuchten für die Verwendung in
schlagwettergefährdeten Grubenbauen - Gebrauchstauglich­keit und andere
sicherheitsrelevante Themen (IEC 60079-35-2:2011)
Lampes-chapeaux utilisables dans les mines grisouteuses - Partie 2: Performance et
autres sujets relatifs à la sécurité (CEI 60079-35-2:2011)
Ta slovenski standard je istoveten z: EN 60079-35-2:2012
ICS:
29.260.20 (OHNWULþQLDSDUDWL]D Electrical apparatus for
HNVSOR]LYQDR]UDþMD explosive atmospheres
73.100.20 3UH]UDþHYDOQD Ventilation, air-conditioning
NOLPDWL]DFLMVNDLQ and illumination equipment
UD]VYHWOMHYDOQDRSUHPD
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60079-35-2
NORME EUROPÉENNE
August 2012
EUROPÄISCHE NORM
ICS 29.260.20 Supersedes EN 62013-2:2006

English version
Explosive atmospheres -
Part 35-2: Caplights for use in mines susceptible to firedamp -
Performance and other safety-related matters
(IEC 60079-35-2:2011)
Atmosphères explosives -  Explosionsfähige Atmosphäre -
Partie 35-2: Lampes chapeaux utilisables Teil 35-2: Kopfleuchten für die
dans les mines grisouteuses - Verwendung in schlagwettergefährdeten
Performances et autres sujets relatifs à la Grubenbauen -
sécurité Gebrauchstauglichkeit und andere
(CEI 60079-35-2:2011) sicherheitsrelevante Themen
(IEC 60079-35-2:2011)
This European Standard was approved by CENELEC on 2012-01-11. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60079-35-2:2012 E
Foreword
The text of document 31/955/FDIS, future edition 1 of IEC 60079-35-2, prepared by IEC/TC 31
"Equipment for explosive atmospheres" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60079-35-2:2012.

The following dates are fixed:
(dop) 2013-02-10
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-01-11

standards conflicting with the
document have to be withdrawn
This document supersedes EN 62013-2:2006.
The general revision and updating of EN 62013-2:2006 has been necessitated by the advent of new
technologies related to caplight design, in particular those related light-emitting diode (LED) light sources.
It is intended that there should be a stronger link between Part 1 (Construction) and Part 2 (Performance)
of this standard by upgrading the reference in the scope of part 1 from a note to a requirement.
In addition, as this standard is now to become one of the EN 60079 series, changes have been made to
bring it more in line with others in the series by cross referencing. This has enabled there to be a
reduction in the number and length of clauses in the standard.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60079-35-2:2011 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 60079-35-2:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050-845 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 845: Lighting
IEC 60079-35-1 - Explosive atmospheres - EN 60079-35-1 -
Part 35-1: Caplights for use in mines
susceptible to firedamp - General
requirements - Construction and testing in
relation to the risk of explosion

IEC 60983 - Miniature lamps EN 60983 -

ISO 80000-1 - Quantities and units - - -
Part 1: General
IEC 60079-35-2 ®
Edition 1.0 2011-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Explosive atmospheres –
Part 35–2: Caplights for use in mines susceptible to firedamp – Performance
and other safety-related matters

Atmosphères explosives –
Partie 35-2: Lampes chapeaux utilisables dans les mines grisouteuses –
Performances et autres sujets relatifs à la sécurité

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
M
CODE PRIX
ICS 29.260.20 ISBN 978-2-88912-818-1
– 2 – 60079-35-2 © IEC:2011
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Light output . 5
4.1 Light sources . 5
4.2 Light source holder . 6
4.3 Luminous intensity and illuminance . 6
4.4 Auxiliary light source . 6
4.5 Focus . 6
4.6 Chromaticity . 6
5 Reliability . 6
5.1 Lamp life . 6
5.2 Battery life (charge/discharge cycles) . 7
5.3 Caplight useful working period . 7
5.4 Durability . 7
5.4.1 Fasteners and connectors . 7
5.4.2 Resistance to abrasion . 7
5.4.3 Operability after mechanical tests . 7
6 Ergonomics . 7
6.1 Mass . 7
6.2 Ease of operation . 8
6.3 Maintainability . 8
6.4 Headpiece security . 8
7 Type tests – Illumination throughout the useful working period . 8
8 Instructions. 9
9 Marking . 9
Annex A (informative) Examples of the manufacturer’s instructions for routine testing
by the user. 10

Figure A.1 – Schematic drawing of a typical photometric sphere . 11

Table A.1 – Tabulation of tests . 12

60079-35-2 © IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
EXPLOSIVE ATMOSPHERES –
Part 35-2: Caplights for use in mines susceptible to firedamp –
Performance and other safety-related matters

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60079-35-2 has been prepared by IEC technical committee 31:
Equipment for explosiv
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.