EN 61076-2-101:2003/A1:2006

SLOVENSKI SIST EN 61076-2-
101:2004/A1:2006
STANDARD
julij 2006
Konektorji za elektronsko opremo – 2-101. del: Okrogli konektorji – Podrobna
specifikacija za okrogle konektorje M8 z navojnim ali zaskočnim zaklepanjem
in konektorje M12 z navojnim zaklepanjem za nizke napetosti (IEC 61076-2-
101:2003/A1:2006)
Connectors for electronic equipment - Part 2-101: Circular connectors - Detail
specification for circular connectors M8 with screw- or snap-locking, M12 with
screw-locking for low voltage applications (IEC 61076-2-101:2003/A1:2006)
ICS 31.220.10 Referenčna številka
SIST EN 61076-2-
101:2004/A1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD
EN 61076-2-101/A1
NORME EUROPÉENNE
March 2006
EUROPÄISCHE NORM
ICS 31.220.10
English version
Connectors for electronic equipment
Part 2-101: Circular connectors -
Detail specification for circular connectors
M8 with screw- or snap-locking,
M12 with screw-locking for low voltage applications
(IEC 61076-2-101:2003/A1:2006)

Connecteurs pour équipements Steckverbinder für elektronische
électroniques Einrichtungen
Partie 2-101: Connecteurs circulaires - Teil 2-101: Rundsteckverbinder -
Spécification particulière Bauartspezifikation
pour les connecteurs circulaires für Rundsteckverbinder
M8 à vis ou à encliquetage, M8 mit Schraub- oder Rastverriegelung
M12 à vis pour applications basse tension und M12 mit Schraubverriegelung
(CEI 61076-2-101:2003/A1:2006) für Niederspannungsanwendungen
(IEC 61076-2-101:2003/A1:2006)

This amendment A1 modifies the European Standard EN 61076-2-101:2003; it was approved by CENELEC on
2006-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-2-101:2003/A1:2006 E

Foreword
The text of document 48B/1591/FDIS, future amendment 1 to IEC 61076-2-101:2003, prepared by
SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for
electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as amendment A1 to EN 61076-2-101:2003 on 2006-02-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
(dop) 2006-11-01
an identical national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-02-01
with the amendment have to be withdrawn
__________
Endorsement notice
The text of amendment 1:2006 to the International Standard IEC 61076-2-101:2003 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
NORME CEI
INTERNATIONALE
IEC
61076-2-101
INTERNATIONAL
STANDARD
AMENDEMENT 1
AMENDMENT 1
2006-02
Amendement 1
Connecteurs pour équipements électroniques –
Partie 2-101:
Connecteurs circulaires –
Spécification particulière pour les connecteurs
circulaires M8 à vis ou à encliquetage,
M12 à vis pour applications basse tension

Amendment 1
Connectors for electronic equipment –
Part 2-101:
Circular connectors –
Detail specification for circular connectors
M8 with screw- or snap-locking, M12 with
screw-locking for low voltage applications
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
H
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61076-2-101 Amend. 1  IEC:2006 – 3 –
FOREWORD
This amendment has been prepared by subcommittee 48B: Connectors, of IEC Technical
Committee 48: Electromechanical components and mechanical structures for electronic
equipment.
The text of this amendment is based on the following documents
FDIS Report on voting
48B/1591/FDIS 48B/1618/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
Page 3
CONTENTS
Add the title of Annex B as follows:
Annex B Diameter of the female connector body

Page 15
1.1 Scope
Add at the end of this Subclause, the following new text:
It also applies to 4 pole M12 circular connectors with integrated codings (i.e. D-coding) for
use in industrial environments at frequencies of 100 MHz and beyond like Industrial Ethernet
(see Note 1), to 5 pole M12 circular connectors with an integrated coding (B-coding) for use in
industrial environments in fieldbuses like Profibus DP and Interbus, and to a 5-pole M12
circular connectors with an integrated coding (P-coding) for use in low voltage applications as
a 4 + PE interface, with a centre contact dedicated to PE as a first make last break contact
(see Note 2).
---------------------- Page
...