EN IEC 60974-14:2018
(Main)Arc welding equipment - Part 14: Calibration, validation and consistency testing
Arc welding equipment - Part 14: Calibration, validation and consistency testing
IEC 60974-14:2018(E) specifies requirements for the verification of arc welding and external monitoring equipment. This document also serves for practical implementation of the verification procedure for arc welding equipment. This document can be applied at the time of installation and any other times or intervals the user deems appropriate to ensure the equipment is capable of operating to the manufacturer’s specification or other specifications deemed applicable by the user.
Lichtbogenschweißeinrichtungen - Teil 14: Kalibrierung, Validierung und Konsistenzprüfung
Matériel de soudage à l'arc - Partie 14: Étalonnage, validation et essais de consistance
L'IEC 60974-14:2018 spécifie les exigences en matière de vérification du matériel de soudage à l'arc et du matériel de surveillance extérieur. Le présent document assure également la mise en œuvre pratique de la procédure de vérification du matériel de soudage à l’arc. Il peut être appliqué au moment de l'installation et à d'autres moments ou intervalles que l'utilisateur juge pertinents pour permettre au matériel de fonctionner selon les spécifications du fabricant ou selon d'autres spécifications qu'il aura jugées applicables. La présente version bilingue (2020-06) correspond à la version anglaise monolingue publiée en 2018-10. La version française de cette norme n'a pas été soumise au vote.
Oprema za obločno varjenje - 14. del: Umerjanje, validacija in preskušanje skladnosti (IEC 60974-14:2018)
Ta del standarda IEC 60974 določa zahteve za VERIFIKACIJO opreme za obločno varjenje in zunanji nadzor. Ta dokument se uporablja tudi za praktično izvajanje postopka VERIFIKACIJE opreme za obločno varjenje.
Ta dokument je mogoče uporabiti v času namestitve in v vseh drugih časovnih presledkih ali intervalih, ki jih določi uporabnik, ki želi zagotoviti, da oprema obratuje v skladu s proizvajalčevimi specifikacijami ali drugimi uporabniško določenimi specifikacijami.
Ta dokument se ne uporablja za:
– plazemske sisteme, ki se uporabljajo za rezanje in dolbenje;
– naprave za obločne udare in stabilizacijo;
– opremo za obločno varjenje, izdelano v skladu s standardom IEC 60974-6.
OPOMBA 1: Druge komponente v varilnih sistemih, kot so npr. roboti, naprave za obračanje, plinske konzole itd., ravno tako vplivajo na rezultat varjenja in jih je mogoče po potrebi verificirati. Dodatne informacije so navedene v standardu ISO 17662.
OPOMBA 2: Redni pregledi in preskušanje opreme za obločno varjenje so zajeti v standardu IEC 60974-4.
Ta dokument velja za uporabnika, servisno delavnico ali proizvajalca. Dokument je mogoče uporabiti – samostojno;
– v povezavi z navodili proizvajalca; ali
– kot podlago za enakovreden postopek VERIFIKACIJE, ki ga je za določeno opremo pripravil proizvajalec.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60974-14:2019
01-februar-2019
1DGRPHãþD
SIST EN 50504:2009
2SUHPD]DREORþQRYDUMHQMHGHO 8PHUMDQMHYDOLGDFLMDLQSUHVNXãDQMH
VNODGQRVWL ,(&
Arc welding equipment - Part 14: Calibration, validation and consistency testing (IEC
60974-14:2018)
Lichtbogenschweißeinrichtungen - Teil 14: Kalibrierung, Validierung und
Konsistenzprüfung (IEC 60974-14:2018)
Matériel de soudage à l'arc - Partie 14: Étalonnage, validation et essais de consistance
(IEC 60974-14:2018)
Ta slovenski standard je istoveten z: EN IEC 60974-14:2018
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN IEC 60974-14:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60974-14:2019
---------------------- Page: 2 ----------------------
SIST EN IEC 60974-14:2019
EUROPEAN STANDARD EN IEC 60974-14
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2018
ICS 25.160.30 Supersedes EN 50504:2008
English Version
Arc welding equipment - Part 14: Calibration, validation and
consistency testing
(IEC 60974-14:2018)
Matériel de soudage à l'arc - Partie 14: Étalonnage, Lichtbogenschweißeinrichtungen - Teil 14: Kalibrierung,
validation et essais de consistance Validierung und Konsistenzprüfung
(IEC 60974-14:2018) (IEC 60974-14:2018)
This European Standard was approved by CENELEC on 2018-11-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60974-14:2018 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60974-14:2019
EN IEC 60974-14:2018 (E)
European foreword
The text of document 26/661/FDIS, future edition 1 of IEC 60974-14, prepared by IEC/TC 26 "Electric
welding" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 60974-14:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-08-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-11-23
document have to be withdrawn
This document supersedes EN 50504:2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60974-14:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60974-4 NOTE Harmonized as EN 60974-4
IEC 60974-5 NOTE Harmonized as EN 60974-5
IEC 60974-6 NOTE Harmonized as EN 60974-6
IEC 60974-9 NOTE Harmonized as EN IEC 60974-9
ISO 17662 NOTE Harmonized as EN ISO 17662
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60974-14:2019
EN IEC 60974-14:2018 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.