EN 60974-8:2004
(Main)Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
Specifies safety and performance requirements for gas consoles intended to be used with combustible gases or oxygen. These gas consoles are designed to supply gases for use in arc welding, plasma cutting, gouging and allied processes in non-explosive atmospheres. They may be external or internal to the power source enclosure.
Lichtbogenschweißeinrichtungen - Teil 8: Gaskonsolen für Schweiß- und Plasmaschneidsysteme
Matériel de soudage à l'arc - Partie 8: Consoles de gaz pour soudage et systèmes de coupage plasma
Spécifie les exigences de sécurité et de performance pour les consoles de gaz destinées à être utilisées avec des gaz combustibles ou de l'oxygène. Ces consoles de gaz sont conçues pour être utilisées pour le soudage à l'arc, le coupage plasma, le gougeage et autres techniques connexes dans des atmosphères non explosives. Elles peuvent être externes ou internes à l'enveloppe de la source de courant.
Oprema za obločno varjenje - 8. del: Plinske konzole za varilne in plazemske rezalne sisteme
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60974-8:2004
STANDARD
september 2004
Oprema za obločno varjenje - 8. del: Plinske konzole za varilne in plazemske
rezalne sisteme
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting
systems
ICS 25.160.30 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60974-8
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2004
ICS 25.160
English version
Arc welding equipment
Part 8: Gas consoles for welding and plasma cutting systems
(IEC 60974-8:2004)
Matériel de soudage à l'arc Lichtbogenschweißeinrichtungen
Partie 8: Consoles de gaz pour soudage Teil 8: Gaskonsolen für Schweiß-
et systèmes de coupage plasma und Plasmaschneidsysteme
(CEI 60974-8:2004) (IEC 60974-8:2004)
This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60974-8:2004 E
Foreword
The text of document 26/272/FDIS, future edition 1 of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.