EN IEC 62769-102-2:2023

SLOVENSKI STANDARD
01-november-2023
Integracija procesne naprave (FDI®) - 102-2. del: Profili - EtherNet/IP (IEC 62769-
102-2:2023)
Field device integration (FDI®) - Part 102-2: Profiles - EtherNet/IP (IEC 62769-102-
2:2023)
Feldgeräteintegration (FDI®) - Teil 102-2: Profile - EtherNet/IP (IEC 62769-102-2:2023)
Intégration des appareils de terrain (FDI®) - Partie 102-2: Profils - EtherNet/IP (IEC
62769-102-2:2023)
Ta slovenski standard je istoveten z: EN IEC 62769-102-2:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62769-102-2

NORME EUROPÉENNE
EUROPÄISCHE NORM June 2023
ICS 33.040.40
English Version
Field device integration (FDI®) - Part 102-2: Profiles -
EtherNet/IP
(IEC 62769-102-2:2023)
Intégration des appareils de terrain (FDI®) - Partie 102-2: Feldgeräteintegration (FDI®) - Teil 102-2: Profile -
Profils - EtherNet/IP EtherNet/IP
(IEC 62769-102-2:2023) (IEC 62769-102-2:2023)
This European Standard was approved by CENELEC on 2023-05-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-102-2:2023 E

European foreword
The text of document 65E/852/CDV, future edition 1 of IEC 62769-102-2, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62769-102-2:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62769-102-2:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62769 (series) NOTE Approved as EN IEC 62769 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61804 series Function blocks (FB) for process control and EN IEC 61804 series
electronic device description language
(EDDL)
IEC 62541-100 - OPC Unified Architecture - Part 100: Device EN 62541-100 -
Interface
IEC 62769-4 2023 Field Device Integration (FDI®) - Part 4: FDI EN IEC 62769-4 2023
Packages
IEC 62769-5 - Field Device Integration (FDI®) - Part 5: FDI - -
Information Model
IEC 62769-7 - Field Device Integration (FDI®) - Part 7: - -
Communication Devices
IEC 62769-100 2020 Field device integration (FDI) - Part 100: EN IEC 62769-100 2020
Profiles - Generic protocols
CIP01 - ODVA.org: Volume One: Common Industrial - -
Protocol (CIPTM)-Edition 3.27
CIP02 - ODVA.org: Volume Two: EtherNet/IP - -
Adaptation of CIP-Edition 1.25
IETF RFC 1117 1989 Internet numbers - -

IEC 62769-102-2 ®
Edition 1.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE ®
Field device integration (FDI ) –
Part 102-2: Profiles – EtherNet/IP ®
Intégration des appareils de terrain (FDI ) –
Partie 102-2: Profils – EtherNet/IP
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.040.40 ISBN 978-2-8322-6830-8
– 2 – IEC 62769-102-2:2023 © IEC 2023
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, abbreviated terms and acronyms . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms and acronyms . 6
4 Conventions . 6
4.1 EDDL syntax . 6
4.2 Capitalizations . 6
5 PSDs for EtherNet/IP . 7
5.1 General . 7
5.2 Header . 7
5.3 ProtocolIdentifier . 9
5.4 Address . 9
5.5 Manufacturer . 9
5.6 DeviceModel . 9
5.7 DeviceRevision . 9
5.8 SerialNumber . 10
5.9 Tag . 10
5.10 ProfileId . 10
5.11 Version . 10
5.12 ProtocolSupportFile . 10
5.13 ExtendedDeviceRevision . 10
6 Byte Ordering . 10
7 Error Codes . 11
8 Example of EtherNet/IP . 11
8.1 General . 11
8.2 Called functionality (success) . 11
8.3 Called Functionality (Error) . 11
8.4 EDD Command . 12
9 Scanning . 12
Bibliography . 13

Table 1 – EtherNet/IP Functions and their representation in an EDD HEADER . 8
Table 2 – EDD datatype mapping with CIP datatype . 9 ®
Table 3 – ProtocolSupportFile for FDI Device Packages . 10
Table 4 – Example EtherNet/IP PDU . 11
Table 5 – Example EtherNet/IP PDU with Error Response . 12

IEC 62769-102-2:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________ ®
FIELD DEVICE INTEGRATION (FDI ) –

Part 102-2: Profiles – EtherNet/IP

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indi
...