EN 55016-1-3:2006/A2:2020
(Amendment)Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
2020-01-16: NEXT STEP: awaiting IEC publication
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-3: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Zusatz-/Hilfseinrichtungen - Störleistungsmessung
Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-3: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Matériels auxiliaires - Puissance perturbatrice
Specifikacija za merilne naprave in metode za merjenje radijskih motenj in odpornosti - 1-3. del: Merilne naprave za merjenje radijskih motenj in odpornosti - Pomožna oprema - Moč motenj - Dopolnilo A2
General Information
Relations
Overview
EN 55016-1-3:2006/A2:2020 (CISPR 16-1-3/A2) is an amendment to the European standard that defines requirements for disturbance power ancillary equipment used in radio disturbance and immunity measurements. The amendment updates normative references, clarifies calibration and measurement uncertainty practices, and provides guidance for absorbing clamp calibration across 30 MHz to 1 000 MHz. The standard is intended for test houses, calibration laboratories and EMC engineers responsible for accurate disturbance-power measurement and traceable results.
Key Topics
- Scope and status: Amendment A2 modifies EN 55016-1-3:2006 and was approved by CENELEC in 2020. It incorporates the international CISPR text without modification.
- Normative references: Adds CISPR TR 16-4-1:2009 (Uncertainties, statistics and limit modelling) and removes the previous CISPR 16-4-2 reference.
- Absorbing clamp calibration: Describes two calibration routes (original method and jig calibration) and requires documentation of the measurement instrumentation uncertainty in calibration reports.
- Measurement uncertainty: Requires application of CISPR TR 16-4-1 guidance to calculate expanded uncertainty. For 30 MHz–300 MHz use Table E.1 guidance; for 300 MHz–1 000 MHz use Table E.2 guidance.
- Jig calibration example: Provides an example uncertainty budget for the absorbing-clamp jig calibration method. Example combined standard uncertainty is 1.02 dB and expanded uncertainty (k=2) is 2.04 dB (illustrative values derived from the standard).
- Practical calibration factors: Includes items such as the uncertainty of the JTF, mismatch between receiver and clamp, influence of cable connections, repeatability, and environmental influences. The absorbing clamp must meet minimum decoupling factors (DF and DR) as specified in the standard.
Applications
This amendment has immediate practical value for organizations conducting EMC disturbance-power measurements:
- Ensures traceable calibration of absorbing clamps and ancillary equipment used in EMC tests.
- Improves repeatability and comparability of disturbance-power results between test houses by standardizing uncertainty estimation methods.
- Guides selection and setup of calibration jigs, including recommended CRP (Clamp Reference Point) spacing - CRP specified as 30 mm with deviations between 25 mm and 35 mm producing <0.15 dB change.
- Recommends mitigation measures such as secondary absorption on receiver cables (see Figure B.4) and vertical flanges on jigs (see Figure B.5) to reduce environmental influence.
Related Standards
- CISPR 16-1-3 (base publication)
- CISPR TR 16-4-1:2009 - Uncertainties, statistics and limit modelling (now a normative reference)
- EN 55016 series - Parts addressing measuring apparatus and methods for radio disturbance and immunity
By aligning calibration practice with CISPR guidance and documenting instrumentation uncertainty, EN 55016-1-3:2006/A2:2020 helps laboratories reduce measurement error and demonstrate compliance in disturbance-power and EMC testing.
Frequently Asked Questions
EN 55016-1-3:2006/A2:2020 is a amendment published by CLC. Its full title is "Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power". This standard covers: 2020-01-16: NEXT STEP: awaiting IEC publication
2020-01-16: NEXT STEP: awaiting IEC publication
EN 55016-1-3:2006/A2:2020 is classified under the following ICS (International Classification for Standards) categories: 33.100.10 - Emission; 33.100.20 - Immunity. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 55016-1-3:2006/A2:2020 has the following relationships with other standards: It is inter standard links to EN 55016-1-3:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 55016-1-3:2006/A2:2020 is associated with the following European legislation: EU Directives/Regulations: 2014/30/EU. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 55016-1-3:2006/A2:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2020
Specifikacija za merilne naprave in metode za merjenje radijskih motenj in
odpornosti - 1-3. del: Merilne naprave za merjenje radijskih motenj in odpornosti -
Pomožna oprema - Moč motenj - Dopolnilo A2
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment -
Disturbance power
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-3:
Appareils de mesure des perturbations radioélectriques et de l'immunité aux
perturbations radioélectriques - Matériels auxiliaires - Puissance perturbatrice
Ta slovenski standard je istoveten z: EN 55016-1-3:2006/A2:2020
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 55016-1-3:2006/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2020
ICS 33.100.10; 33.100.20
English Version
Specification for radio disturbance and immunity measuring
apparatus and methods - Part 1-3: Radio disturbance and
immunity measuring apparatus - Ancillary equipment -
Disturbance power
(CISPR 16-1-3:2004/A2:2020)
Spécifications des méthodes et des appareils de mesure Anforderungen an Geräte und Einrichtungen sowie
des perturbations radioélectriques et de l'immunité aux Festlegung der Verfahren zur Messung der hochfrequenten
perturbations radioélectriques - Partie 1-3: Appareils de Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-
mesure des perturbations radioélectriques et de l'immunité 3: Geräte und Einrichtungen sowie Festlegung der
aux perturbations radioélectriques - Matériels auxiliaires - Verfahren zur Messung der hochfrequenten
Puissance perturbatrice Störaussendung (Funkstörungen) und Störfestigkeit -
(CISPR 16-1-3:2004/A2:2020) Zusatz-/Hilfseinrichtungen - Störleistungsmessung
(CISPR 16-1-3:2004/A2:2020)
This amendment A2 modifies the European Standard EN 55016-1-3:2006; it was approved by CENELEC on 2020-03-03. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 55016-1-3:2006/A2:2020 E
European foreword
The text of document CIS/A/1305/FDIS, future CISPR 16-1-3/A2, prepared by CISPR SC A "Radio-
interference measurements and statistical methods" of CISPR "International special committee on
radio interference" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-11-26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-02-26
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard CISPR 16-1-3:2004/A2:2020 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Add the following reference to Annex ZA of EN 55016-1-3:2006:
Publication Year Title EN/HD Year
CISPR TR 16-4-1 2009 Specification for radio disturbance and - -
immunity measuring apparatus and
methods - Part 4-1: Uncertainties, statistics
and limit modelling - Uncertainties in
standardized EMC tests
Delete the following reference to Annex ZA of EN 55016-1-3:2006:
Publication Year Title EN/HD Year
CISPR 16-4-2 - Specification for radio disturbance and EN 55016-4-2 -
immunity measuring apparatus and
methods Part 4-2: Uncertainties, statistics
and limit modelling - Uncertainty in EMC
measurements
CISPR 16-1-3 ®
...
기사 제목: EN 55016-1-3:2006/A2:2020 - 무선 장애 및 면역 측정 기기 및 방법에 대한 명세 - 파트 1-3: 무선 장애 및 면역 측정 기기 - 부속 장비 - 장애 전력 기사 내용: 2020년 1월 16일: 다음 단계: IEC 게시물 대기 중 이 기사에서는 무선 장애 및 면역 측정 기기 및 방법에 해당하는 EN 55016-1-3:2006/A2:2020 명세에 대해 논의하고 있다. 특히, 부속 장비의 장애 전력 측정에 중점을 둔다. 2020년 1월 16일 현재, 이 명세의 다음 단계는 국제 전기 표준화 기구(IEC) 게시물의 발표를 기다리는 것이다.
The article discusses the EN 55016-1-3:2006/A2:2020 specification, which pertains to radio disturbance and immunity measuring apparatus and methods. Specifically, it focuses on the measurement of disturbance power in ancillary equipment. As of January 16, 2020, the next step for this specification is awaiting publication by the International Electrotechnical Commission (IEC).
記事のタイトル：EN 55016-1-3:2006/A2:2020 - 電波の妨害および免疫測定装置と方法の仕様 - パート1-3: 電波の妨害および免疫測定装置 - 付属装置 - 妨害電力 記事内容：2020年1月16日：次のステップ：IECの公開を待っている 本記事では、EN 55016-1-3:2006/A2:2020の仕様について詳しく述べられています。これは、電波の妨害および免疫測定装置と方法に関連したもので、特に付属装置における妨害電力の測定に焦点を当てています。2020年1月16日現在、この仕様は国際電気標準会議（IEC）による公開を待っている状態です。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...