EN 50090-8:2000
(Main)Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products
Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products
This standard is relevant for all electronic products and systems (including their software) having home and/or building control functions. It is not restricted to products complying with the HBES standards. Parts of devices and equipment not providing HBES functionality are not included. For such device parts the relevant product standards apply. This standard defines the general conformity assessment requirements for the communication protocols. This standard indicates those standards to be used for conformity assessment of HBES products and or systems. The conformity assessment procedure provides requirements for all key elements of HBES, such as safety, including functional safety, EMC requirements and environment. These requirements are given by reference to relevant standards, where available. The assessment and testing of installed systems will be covered by EN 50090-9-2.
Elektrische Systemtechnik für Heim und Gebäude (ESHG) - Teil 8: Konformitätsbeurteilung von Produkten
Systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) - Partie 8: Evaluation de la conformité des produits
Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2001
Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of
products
Home and Building Electronic Systems (HBES) -- Part 8: Conformity assessment of
products
Elektrische Systemtechnik für Heim und Gebäude (ESHG) -- Teil 8:
Konformitätsbeurteilung von Produkten
Systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) -- Partie 8:
Evaluation de la conformité des produits
Ta slovenski standard je istoveten z: EN 50090-8:2000
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50090-8
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2000
ICS 97.120
English version
Home and Building Electronic Systems (HBES)
Part 8: Conformity assessment of products
Systèmes électroniques pour les foyers Elektrische Systemtechnik für Heim und
domestiques et les bâtiments (HBES) Gebäude (ESHG)
Partie 8: Evaluation de la conformité des Teil 8: Konformitätsbeurteilung von
produits Produkten
This European Standard was approved by CENELEC on 2000-08-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50090-8:2000 E
Page 2
Foreword
This European Standard has been prepared by the Technical Committee CENELEC TC 205 ”Home and
Building Electronic Systems" (HBES) in close relation with ELSECOM.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as EN 50090-8 on 2000-08-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-04-01
__________
EN 50090-8 is part of the EN 50090 series of European Standards, which will comprise the following
parts:
Part 1: Standardization structure
Part 2: System overview
Part 3: Aspects of application
Part 4: Transport layer and network layer
Part 5: Media and media dependent layers
Part 6: Interfaces
Part 7: System management
Part 8: Conformity assessment of products
Part 9: Installation requirements
Annexes designated "informative" are given for information only.
In this standard, annex A is informative.
Page 3
CONTENTS
Foreword .2
Introduction.4
1 Scope.4
2 Normative references.4
3 Definitions.4
4 Applicable standards.5
4.1 General.5
4.2 Protocols.5
4.3 Electrical safety.5
4.4 Electromagnetic compatibility (EMC) .5
4.5 Environment.5
4.6 Functional safety.5
Annex A (informative) Bibliography.6
Page 4
Introduction
This document identifies the rules and standards that are particularly applicable to HBES functionalities
in products in order to enable harmonisation of testing and conformity assessment.
A product may comprise a single device or a combination of devices intended to be connected and
supplied together.
1 Scope
This standard is relevant for all electronic products and systems (including their software) having home
and/or building control functions. It is not restricted to products complying with the HBES stand
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.