EN 60947-2:1996/A2:2001

SLOVENSKI STANDARD
01-februar-2002
1L]NRQDSHWRVWQHVWLNDOQHLQNUPLOQHQDSUDYH±GHO2GNORSQLNL±'RSROQLOR$±
6SUHPHPEDYHþSRGUD]GHONRYLQGRGDWHN/
Low-voltage switchgear and controlgear -- Part 2: Circuit-breakers
Niederspannungsschaltgeräte -- Teil 2: Leistungsschalter
Appareillage à basse tension -- Partie 2: Disjoncteurs
Ta slovenski standard je istoveten z: EN 60947-2:1996/A2:2001
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60947-2/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2001
ICS 29.130.20
English version
Low-voltage switchgear and controlgear
Part 2: Circuit-breakers
(IEC 60947-2:1995/A2:2001)
Appareillage à basse tension Niederspannungsschaltgeräte
Partie 2: Disjoncteurs Teil 2: Leistungsschalter
(CEI 60947-2:1995/A2:2001) (IEC 60947-2:1995/A2:2001)
This amendment A2 modifies the European Standard EN 60947-2:1996; it was approved by CENELEC
on 2001-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60947-2:1996/A2:2001 E

Foreword
The text of document 17B/1135/FDIS, future amendment 2 to IEC 60947-2:1995, prepared by
SC 17B, Low-voltage switchgear and controlgear, of IEC TC 17, Switchgear and controlgear, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to
EN 60947-2:1996 on 2001-07-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-04-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2004-07-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of amendment 2:2001 to the International Standard IEC 60947-2:1995 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
- 3 - EN 60947-2:1996/A2:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
Add:
Publication Year Title EN/HD Year
IEC 60068-2-14 1984 Environmental testing EN 60068-2-14 1999
Part 2: Tests - Test N: Change of
temperature
)
IEC 60695-2-1/0 1994 Fire hazard testing EN 60695-2-1/0 1996
Part 2: Test methods -- Section 1/
sheet 0: Glow-wire test methods -
General
2)
IEC 60695-2-1/1 1994 Part 2: Test methods -- Section 1/ EN 60695-2-1/1 1996
+ corr. May 1995 sheet 1: Glow-wire end-product test and
guidance
)
IEC 60695-2-1/2 1994 Part 2: Test methods -- Section 1/ EN 60695-2-1/2 1996
sheet 2: Glow-wire flammability test on
materials
4)
IEC 60695-2-1/3 1994 Part 2: Test methods -- Section 1/ EN 60695-2-1/3 1996
sheet 3: Glow-wire ignitability test on
materials
IEC 61000-3-2 2000 Electromagnetic compatibility (EMC) EN 61000-3-2 2000
(mod) Part 3-2: Limits - Limits for harmonic
current emissions (equipment input
current up to and including 16 A per
phase)
IEC 61000-3-3 1994 Part 3-3: Limits - Limitation of voltage EN 61000-3-3 1995
changes, voltage fluctuations and flicker + corr. July
in public low-voltage supply systems, for
equipment with rated current ≤16 A per
phase and not subject to conditional
connection
IEC 61000-5-2 1997 Part 5: Installation and mitigation --
guidelines -- Section 2: Earthing and
cabling
1)
EN 60695-2-1/0 is superseded by EN 60695-2-10:2001 (IEC 60695-2-10:2000).
2)
EN 60695-2-1/1 is superseded by EN 60695-2-11:2001 (IEC 60695-2-11:2000).
3)
EN 60695-2-1/2 is superseded by EN 60695-2-12:2001 (IEC 60695-2-12:2000).
4)
EN 60695-2-1/3 is superseded by EN 60695-2-13:2001 (I
...