Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in units - Alignment and/or earth pin

Specifies dimensions which will ensure dimensional interchangeability of subracks and associated plug-in units using the extended function of an alignment and/or earth pin method added to EN 60297-3, EN 60297-4 and EN 60297-5-107.

Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-in-)Bauweise - Teil 5-105: Baugruppenträger und zugehörige Baugruppen - Führungs- und/oder Erdungsstift

Structures mécaniques pour équipement électronique - Dimensions des structures mécaniques de la série de 482,6 mm (19 in) - Partie 5-105: Bacs et blocs enfichables associés - Broche d'alignement et/ou de terre

Cette publication existe seulement en langue anglaise.

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in units - Alignment and/or earth pin (IEC 60297-5-105:2001)

General Information

Status
Withdrawn
Publication Date
12-Apr-2001
Withdrawal Date
29-Feb-2004
ICS
31.240 - Mechanical structures for electronic equipment
Technical Committee
CLC/SR 48D - Mechanical structures for electronic equipment
Drafting Committee
IEC/SC 48D - IEC_SC_48D
Parallel Committee
IEC/SC 48D - IEC_SC_48D
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Sep-2007
Completion Date
01-Sep-2007
Ref Project
SIST EN 60297-5-105:2002 - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-105: Subracks and associated plug-in units - Alignment and/or earth pin

Relations

Replaced By
EN 60297-3-103:2004 - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-103: Keying and alignment pin
Effective Date
29-Jan-2023
Refers
EN 61587-1:1999 - Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
Effective Date
03-Feb-2026
Refers
EN 60917-1:1998 - Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard
Effective Date
03-Feb-2026
Refers
EN 60297-5-104:2001 - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-104: Subracks and associated plug-in units - Keying
Effective Date
03-Feb-2026
Refers
HD 493.3 S2:1993 - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3: Subracks and associated plug-in units
Effective Date
03-Feb-2026
Refers
EN 60297-5-103:2001 - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-103: Subracks and associated plug-in units - Electrostatic discharge protection
Effective Date
03-Feb-2026
Refers
EN 60297-4:1995 - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions
Effective Date
03-Feb-2026
Refers
EN 60297-5-101:2001 - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-101: Subracks and associated plug-in units - Injector/extractor handle
Effective Date
03-Feb-2026
Referred By
EN 60297-5-102:2001 - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-102: Subracks and associated plug-in units - Electromagnetic shielding provision
Effective Date
03-Feb-2026
Referred By
EN 60297-5-100:2001 - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in units - Design overview
Effective Date
03-Feb-2026
Referred By
EN 60297-5-107:2001 - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in units - Rear mounted plug-in units
Effective Date
03-Feb-2026

Frequently Asked Questions

EN 60297-5-105:2001 is a standard published by CLC. Its full title is "Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in units - Alignment and/or earth pin". This standard covers: Specifies dimensions which will ensure dimensional interchangeability of subracks and associated plug-in units using the extended function of an alignment and/or earth pin method added to EN 60297-3, EN 60297-4 and EN 60297-5-107.

Specifies dimensions which will ensure dimensional interchangeability of subracks and associated plug-in units using the extended function of an alignment and/or earth pin method added to EN 60297-3, EN 60297-4 and EN 60297-5-107.

EN 60297-5-105:2001 is classified under the following ICS (International Classification for Standards) categories: 31.240 - Mechanical structures for electronic equipment. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 60297-5-105:2001 has the following relationships with other standards: It is inter standard links to EN 60297-3-103:2004, EN 61587-1:1999, EN 60917-1:1998, EN 60297-5-104:2001, HD 493.3 S2:1993, EN 60297-5-103:2001, EN 60297-4:1995, EN 60297-5-101:2001, EN 60297-5-102:2001, EN 60297-5-100:2001, EN 60297-5-107:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 60297-5-105:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2002
Mechanical structures for electronic equipment - Dimensions of mechanical
structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated
plug-in units - Alignment and/or earth pin (IEC 60297-5-105:2001)
Mechanical structures for electronic equipment - Dimensions of mechanical structures of
the 482,6 mm (19 in) series -- Part 5-105: Subracks and associated plug-in units -
Alignment and/or earth pin
Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-in-)Bauweise --
Teil 5-105: Baugruppenträger und zugehörige Baugruppen - Führungs- und/oder
Erdungsstift
Structures mécaniques pour équipement électronique - Dimensions des structures
mécaniques de la série de 482,6 mm (19 in) -- Partie 5-105: Bacs et blocs enfichables
associés - Broche d'alignement et/ou de terre
Ta slovenski standard je istoveten z: EN 60297-5-105:2001
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...