EN 62841-3-4:2016/A1:2020

SLOVENSKI STANDARD
01-junij-2020
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-
4. del: Posebne zahteve za prenosne namizne brusilnike - Dopolnilo A1 (IEC 62841
-3-4:2016/A1:2019)
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
(IEC 62841-3-4:2016/A1:2019)
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen für
transportable Tischschleifmaschinen (IEC 62841-3-4:2016/A1:2019)
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 3-4: Exigences particulières pour les tourets à meuler transportables
(IEC 62841-3-4:2016/A1:2019)
Ta slovenski standard je istoveten z: EN 62841-3-4:2016/A1:2020
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 Električna orodja Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62841-3-4:2016/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2020
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-4: Particular
requirements for transportable bench grinders
(IEC 62841-3-4:2016/A1:2019)
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-4: Exigences transportable Werkzeuge und Rasen- und
particulières pour les tourets à meuler transportables Gartenmaschinen - Sicherheit - Teil 3-4: Besondere
(IEC 62841-3-4:2016/A1:2019) Anforderungen für transportable Tischschleifmaschinen
(IEC 62841-3-4:2016/A1:2019)
This amendment A1 modifies the European Standard EN 62841-3-4:2016; it was approved by CENELEC on 2019-08-06. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-3-4:2016/A1:2020 E

European foreword
The text of document 116/381/CDV, future IEC 62841-3-4/A1, prepared by IEC/TC 116 "Safety of
motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62841-3-4:2016/A1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-09-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-03-13
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
...