EN IEC 62769-6:2023

SLOVENSKI STANDARD
01-november-2023
Integracija procesne naprave (FDI®) - 6. del: Preslikava tehnologije FDI (IEC 62769-
6:2023)
Field Device Integration (FDI®) - Part 6: FDI Technology Mappings (IEC 62769-6:2023)
Feldgeräteintegration (FDI®) - Teil 6: FDI-Technologieabbildungen (IEC 62769-6:2023)
Intégration des appareils de terrain (FDI®) - Partie 6: Mappings de technologies FDI
(IEC 62769-6:2023)
Ta slovenski standard je istoveten z: EN IEC 62769-6:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62769-6

NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 25.040.40; 35.100.05 Supersedes EN IEC 62769-6:2021
English Version
Field Device Integration (FDI®) - Part 6: FDI Technology
Mappings
(IEC 62769-6:2023)
Intégration des appareils de terrain (FDI®) - Partie 6: Feldgeräteintegration (FDI®) - Teil 6: FDI-
Mappings de technologies FDI Technologieabbildungen
(IEC 62769-6:2023) (IEC 62769-6:2023)
This European Standard was approved by CENELEC on 2023-05-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-6:2023 E

European foreword
The text of document 65E/867/CDV, future edition 3 of IEC 62769-6, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-11
document have to be withdrawn
This document supersedes EN IEC 62769-6:2021 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62769-6:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62769-4 NOTE Approved as EN IEC 62769-4
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 62769-1 - Field Device Integration (FDI®) - Part 1: EN IEC 62769-1 -
Overview
IEC 62769-6-100 - Field Device Integration (FDI®) - Part 6-100: - -
Technology Mapping - .Net
IEC 62769-6-200 - Field Device Integration (FDI®) - Part 6-200: - -
Technology Mapping - HTML5
FCG TS10099 - Field Device Integration (FDI®) – Technology - -
Management
HTML5 2014 W3C Recommendation. World Wide Web - -
Consortium (W3C)
ECMA-626 - ECMAScript 2016 Language Specification - -

IEC 62769-6 ®
Edition 3.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Field device integration (FDI®) –
Part 6: FDI® Technology Mappings
Intégration des appareils de terrain (FDI®) –
Partie 6: Mappings de technologies FDI®
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-6477-5
– 2 – IEC 62769-6:2023 © IEC 2023
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, abbreviated terms, acronyms and conventions . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms and acronyms . 6
4 Platforms and runtime. 6
4.1 Runtime . 6
4.1.1 .NET Framework . 6
4.1.2 HTML5 . 6
4.2 Platforms . 6
4.2.1 Workstation . 6
4.2.2 Mobile . 6
Bibliography . 7

IEC 62769-6:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________ ®
FIELD DEVICE INTEGRATION (FDI ) –
®
Part 6: FDI Technology Mappings

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Techni
...