EN IEC 61158-6-19:2019
(Main)Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements
Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements
IEC 61158-6-19:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This fourth edition includes the following significant technical changes with respect to the previous edition: - improving the hotplug and redundancy features; - improving the phase switching and the error handling; - editorial improvements.
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-19: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 19-Elemente
Extincteurs d'incendie portatifs - Partie 7: Caractéristiques, performances et méthodes d'essai
L’IEC 611586-19:2019 fournit des éléments communs pour les communications de messagerie prioritaires et non prioritaires élémentaires entre les programmes d’application des environnements d’automatisation et le matériel spécifique au bus de terrain de type 19. On utilise le terme "prioritaire" pour traduire la présence d’une fenêtre temporelle, à l’intérieur de laquelle il est exigé qu’une ou plusieurs actions spécifiées soient terminées avec un niveau de certitude défini. Si les actions spécifiées ne sont pas réalisées dans la fenêtre temporelle, les applications demandant les actions risquent de connaître une défaillance, avec les risques que cela comporte pour les équipements, les installations et éventuellement la vie humaine. La présente norme définit de manière abstraite le service, visible par un observateur externe, assuré par les différents Types de la couche Application de bus de terrain, en termes a) de modèle abstrait visant à la définition des ressources d’application (objets) qui peuvent être manipulées par des utilisateurs utilisant un service FAL; b) d’événements et d’actions liés aux primitives du service; c) de paramètres associés à chaque événement et action de primitive, ainsi que de forme prise par ces paramètres; et d) d’interaction entre ces événements et ces actions, ainsi que de séquences valides desdits événements et actions. Le but du présent document est de définir les services fournis à: a) l’utilisateur de FAL à la frontière entre l’utilisateur et la Couche application du Modèle de référence de bus de terrain; et b) la Gestion des systèmes au niveau de la frontière entre la Couche application et la Gestion des systèmes selon le Modèle de référence de bus de terrain.
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-19. del: Specifikacija protokola na aplikacijski ravni - Elementi tipa 19 (IEC 61158-6-19:2019)
Ta dokument določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju ter materialu, specifičnem za procesna vodila tipa 19. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta mednarodni standard na abstrakten način določa zunanje vidno opravilo, ki ga zagotavljajo različni tipi aplikacijskih nivojev procesnih vodil v zvezi s/z: a) abstraktnim modelom za določanje aplikacijskih virov (objektov), ki jih uporabniki lahko spreminjajo prek opravila aplikacijskega nivoja procesnih vodil; b) primitivnimi dejanji in dogodki opravila; c) parametri, povezanimi z vsakim primitivnim dejanjem in dogodkom, kot tudi obliko, ki jo prevzamejo; ter d) medsebojno povezavo med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji. Namen tega dokumenta je opredeliti opravila, ki se zagotavljajo za: a) uporabnika aplikacijskega nivoja procesnih vodil na meji med uporabnikom in aplikacijskim nivojem referenčnega modela procesnih vodil ter b) upravljanje sistemov na meji med aplikacijskim nivojem in upravljanje sistemov referenčnega modela procesnih vodil. Ta dokument določa strukturo in opravila aplikacijskega nivoja procesnih vodil IEC v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498) ter strukturo aplikacijskega nivoja OSI (ISO/IEC 9545). Opravila in protokole aplikacijskega nivoja procesnih vodil zagotavljajo aplikacijski osebki (AE) aplikacijskega nivoja procesnih vodil znotraj aplikacijskih procesov. Aplikacijski osebek aplikacijskega nivoja procesnih vodil sestavljata sklop objektno usmerjenih aplikacijskih opravilnih elementov (ASE) in osebek za upravljanje nivojev (LME), ki upravlja aplikacijski osebek. Aplikacijski opravilni elementi zagotavljajo komunikacijska opravila, ki delujejo na sklopu povezanih razredov objektov aplikacijskega procesa (APO). Med aplikacijske opravilne elemente aplikacijskega nivoja procesnih vodil spada aplikacijski opravilni element za upravljanje, ki zagotavlja skupen sklop opravil za upravljanje primerkov razredov aplikacijskega nivoja procesnih vodil. Čeprav ta opravila določajo način izdajanja ter dostavljanja zahtev in odzivov z vidika aplikacij, ne zajemajo specifikacije v zvezi s tem, kako naj se nanje odzovejo aplikacije, ki te zahteve in odzive oddajajo. To pomeni, da vedenjski vidiki aplikacij niso opredeljeni; opredeljena je le definicija zahtev in odzivov, ki jih lahko pošiljajo/prejemajo. Tako se uporabnikom aplikacijskega nivoja procesnih vodil omogoči večja prilagodljivost pri standardizaciji takega vedenja objektov. Poleg teh opravil so v tem dokumentu opredeljena tudi nekatera podporna opravila, da se omogoči dostop do aplikacijskega nivoja procesnih vodil za nadzorovanje nekaterih vidikov njegovega delovanja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2019
Nadomešča:
SIST EN 61158-6-19:2015
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-19. del:
Specifikacija protokola na aplikacijski ravni - Elementi tipa 19 (IEC 61158-6-
19:2019)
Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer
protocol specification - Type 19 elements (IEC 61158-6-19:2019)
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-19: Protokollspezifikation des
Application Layer (Anwendungsschicht) - Typ 19-Elemente (IEC 61158-6-19:2019)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-19:
Spécification du protocole de la couche application - Eléments de type 19 (IEC 61158-6-
19:2019)
Ta slovenski standard je istoveten z: EN IEC 61158-6-19:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61158-6-19
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2019
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-6-19:2014 and all of its
amendments and corrigenda (if any)
English Version
Industrial communication networks - Fieldbus specifications -
Part 6-19: Application layer protocol specification - Type 19
elements
(IEC 61158-6-19:2019)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 6-19:
bus de terrain - Partie 6-19: Spécification du protocole de la Protokollspezifikation des Application Layer
couche application - Eléments de type 19 (Anwendungsschicht) - Typ 19-Elemente
(IEC 61158-6-19:2019) (IEC 61158-6-19:2019)
This European Standard was approved by CENELEC on 2019-07-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61158-6-19:2019 E
European foreword
The text of document 65C/948/FDIS, future edition 4 of IEC 61158-6-19, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61158-6-
19:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-04-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-07-25
document have to be withdrawn
This document supersedes EN 61158-6-19:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61158-6-19:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61131 (series) NOTE Harmonized as EN 61131 (series)
IEC 61158-1 NOTE Harmonized as EN IEC 61158-1
IEC 61158-4-16 NOTE Harmonized as EN 61158-4-16
IEC 61784-1 NOTE Harmonized as EN IEC 61784-1
IEC 61784-2 NOTE Harmonized as EN IEC 61784-2
IEC 61800 (series) NOTE Harmonized as EN 61800 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-3-19 2019 Industrial communication networks - Fieldbus EN IEC 61158-3-19 2019
specifications - Part 3-19: Data-link layer
service definition - Type 19 elements
IEC 61158-4-19 2019 Industrial communication networks - Fieldbus EN IEC 61158-4-19 2019
specifications - Part 4 -19: Data-link layer
protocol specification - Type 19 elements
IEC 61158-5-19 2019 Industrial communication networks - Fieldbus EN IEC 61158-5-19 2019
specifications - Part 5-19: Application layer
service definition - Type 19 elements
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of basic
notation
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI services
IEC 61158-6-19 ®
Edition 4.0 2019-06
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 6-19: Application layer protocol specification – Type 19 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-7012-7
– 2 – IEC 61158-6-19:2019 © IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
1.1 General . 7
1.2 Specifications . 8
1.3 Conformance . 8
2 Normative references . 8
3 Terms, definitions, symbols, abbreviations and conventions . 9
3.1 Referenced terms and definitions . 9
3.1.1 ISO/IEC 7498-1 terms . 9
3.1.2 ISO/IEC 8822 terms . 9
3.1.3 ISO/IEC 9545 terms . 9
3.1.4 ISO/IEC 8824-1 terms . 9
3.1.5 Fieldbus Data Link Layer terms . 10
3.2 Additional terms and definitions . 10
3.3 Additional abbreviations and symbols . 11
3.4 Conventions . 12
4 Abstract syntax . 12
5 Transfer syntax . 12
5.1 Introduction . 12
5.2 RTC PDU merged abstract and transfer syntax . 12
6 Structure of FAL protocol state machines . 12
7 AP-context state machine . 14
7.1 Overview. 14
7.2 States . 14
7.2.1 Idle . 14
7.2.2 Running . 14
7.3 States, events and transitions . 15
8 FAL service protocol machine (FSPM) . 15
8.1 Overview. 15
8.2 MGT services . 15
8.2.1 Get network status . 15
8.2.2 Get device status . 15
8.2.3 Network status change report . 15
8.2.4 Device status change report . 15
8.2.5 Set device status . 15
8.2.6 Enable RTC . 15
8.2.7 Enable hot-plug . 16
8.2.8 Notify RTC . 16
8.2.9 Disable RTC . 16
8.2.10 Notify error . 16
8.3 IDN services . 16
8.3.1 Read . 16
8.3.2 Write. 16
8.4 CYCIDN services . 16
8.4.1 Read_cyclic . 16
IEC 61158-6-19:2019 © IEC 2019 – 3 –
8.4.2 Write_cyclic . 16
8.4.3 Notify_cyclic . 16
9 Application relationship protocol machine (ARPM) . 16
9.1 Overview. 16
9.2 Master ARPM . 17
9.2.1 Overview . 17
9.2.2 State descriptions . 17
9.2.3 States, events and transitions . 18
9.3 Slave ARPM .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.