Primary batteries - Part 2: Physical and electrical specifications

IEC 60086-2:2011 is applicable to primary batteries based on standardized electrochemical systems. It specifies the physical dimensions; and the discharge test conditions and discharge performance requirements. Significant changes from the previous edition are the deletion of eight battery types from this standard, the addition of an air hole placement diagram and deletion of the resistive hearing aid tests for the P-system (zinc air) hearing aid batteries, standardization of a new form of alkaline (L-system) 9 volt battery (6LP3146), addition of a common designation reference as Annex D and general adjustment of application tests and their minimum average duration values to reflect changes in battery usage.

Primärbatterien - Teil 2: Physikalische und elektrische Spezifikationen

Piles électriques - Partie 2: Spécifications physiques et électriques

La CEI 60086-2:2011 est applicable aux piles électriques fonctionnant avec des systèmes électrochimiques normalisés. Elle spécifie les dimensions physiques; et les conditions d'essai de décharge et les spécifications de performance de décharge. Les modifications significatives par rapport à l'édition précédente sont la suppression de huit types de piles de la présente norme, l'ajout d'un schéma de placement d'évents et la suppression des essais résistifs pour les prothèses auditives relatifs aux piles de prothèse auditive du système P (zinc air), la normalisation d'une nouvelle forme de pile alcaline (système L) de neuf volts (6LP3146), l'ajout d'une référence de désignation commune sous forme d'Annexe D et l'adaptation globale des essais d'application et de leurs valeurs minimales de durée moyenne pour refléter les changements relatifs à l'utilisation des piles.

Primarne baterije - 2. del: Fizikalne in električne specifikacije (IEC 60086-2:2011)

Ta del IEC 60086 velja za primarne baterije, ki temeljijo na standardiziranih elektrokemijskih sistemih.
Določa
− fizične mere;
− preskusne pogoje za praznjenje in zahteve za učinkovitost praznjenja.

General Information

Status
Withdrawn
Publication Date
24-Mar-2011
Withdrawal Date
23-Mar-2014
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
03-Dec-2018
Completion Date
03-Dec-2018

Relations

Buy Standard

Standard
EN 60086-2:2011
English language
62 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2011
1DGRPHãþD
SIST EN 60086-2:2007
3ULPDUQHEDWHULMHGHO)L]LNDOQHLQHOHNWULþQHVSHFLILNDFLMH ,(&
Primary batteries - Part 2: Physical and electrical specifications (IEC 60086-2:2011)
Primärbatterien - Teil 2: Physikalische und elektrische Spezifikationen (IEC 60086-
2:2011)
Piles primaires - Partie 2: Spécifications physiques et électriques (CEI 60086-2:2011)
Ta slovenski standard je istoveten z: EN 60086-2:2011
ICS:
29.220.10 3ULPDUQLþOHQLLQEDWHULMH Primary cells and batteries
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60086-2
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 29.220.10 Supersedes EN 60086-2:2007

English version
Primary batteries -
Part 2: Physical and electrical specifications
(IEC 60086-2:2011)
Piles primaires -  Primärbatterien -
Partie 2: Spécifications physiques et Teil 2: Physikalische und elektrische
électriques Spezifikationen
(CEI 60086-2:2011) (IEC 60086-2:2011)

This European Standard was approved by CENELEC on 2011-03-24. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60086-2:2011 E
Foreword
The text of document 35/1271/CDV, future edition 12 of IEC 60086-2, prepared by IEC TC 35, Primary
cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60086-2 on 2011-03-24.
This European Standard supersedes EN 60086-2:2007.
Significant changes from EN 60086-2:2007 are the deletion of eight battery types from this standard, the
addition of an air hole placement diagram and deletion of the resistive hearing aid tests for the P-system
(zinc air) hearing aid batteries, standardization of a new form of alkaline (L-system) 9 volt battery
(6LP3146), addition of a common designation reference as Annex D and general adjustment of
application tests and their minimum average duration values to reflect changes in battery usage.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-12-24
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-03-24
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60086-2:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60086-3 NOTE  Harmonized as EN 60086-3.
IEC 60086-4 NOTE  Harmonized as EN 60086-4.
IEC 60086-5 NOTE  Harmonized as EN 60086-5.
IEC 62281 NOTE  Harmonized as EN 62281.
__________
- 3 - EN 60086-2:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60086-1 2011 Primary batteries - EN 60086-1 2011
Part 1: General
ISO 1101 2004 Geometrical Product Specifications (GPS) - EN ISO 1101 -
Geometrical tolerancing - Tolerances of form,
orientation, location and run-out

IEC 60086-2 ®
Edition 12.0 2011-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Primary batteries –
Part 2: Physical and electrical specifications

Piles électriques –
Partie 2: Spécifications physiques et électriques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 29.220.10 ISBN 978-2-88912-360-5

– 2 – 60086-2  IEC:2011
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, symbols and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Symbols and abbreviations . 8
4 Battery dimensions, symbols . 9
5 Constitution of the battery specification tables . 9
6 Physical and electrical specifications . 11
6.1 Category 1 batteries . 11
6.1.1 Category 1 – Physical and electrical specifications . 11
6.2 Category 2 batteries . 18
6.2.1 Category 2 – Physical and electrical specifications . 18
6.3 Category 3 batteries . 20
6.3.1 Category 3 – Physical and electrical specifications . 20
6.4 Category 4 batteries . 21
6.4.1 Category 4 – Physical and electrical specifications . 21
6.5 Category 5 batteries . 30
6.5.1 Category 5 – Physical and electrical specifications . 30
6.6 Category 6 batteries . 34
6.6.1 Category 6 – Physical and electrical specifications . 34
Annex A (informative) Tabulation of batteries by application . 48
Annex B (informative) Cross-reference index . 54
Annex C (informative) Index . 57
Annex D (informative) Common designation . 58
Bibliography . 59

Figure 1 – Category 1 dimensional drawings . 11
Figure 2 – Category 2 dimensional drawing . 18
Figure 3 – Category 3 dimensional drawings . 20
Figure 4 – Category 4 dimensional drawing . 21
Figure 5 – Gauge drawing for P system batteries . 24
Figure 6 – Airhole placement diagram . 25
Figure 7 – Dimensional drawings: R40 . 30
Figure 8 – Dimensional drawing: 4LR44, 2CR13252, 4SR44 . 32
Figure 9 – Dimensional drawings: 3R12P, 3R12S, 3LR12 . 34
Figure 10 – Dimensional drawings: 4LR61 . 36
Figure 11 – Dimensional drawings: CR-P2 . 37
Figure 12 – Dimensional drawings: 2CR5 . 38
Figure 13 – Dimensional drawings: 2EP3863 . 39
Figure 14 – Dimensional drawings: 4R25X, 4LR25X . 40
Figure 15 – Dimensional drawings: 4R25Y . 41

60086-2  IEC:2011 – 3 –
Figure 16 – Dimensional drawings: 4R25-2, 4LR25-2 . 42
Figure 17 – Dimensional drawings: 6AS4 . 43
Figure 18 – Dimensional drawings: 6AS6 . 44
Figure 19 – Dimensional drawings: 6F22, 6LR61, 6LP3146 . 45
Figure 20 – Dimensional drawings: 6F100 . 47

Table A.1 – Road warning lamp . 48
Table A.2 – Industrial equipment. 48
Table A.3 – Electric fence controller . 48
Table A.4 – Radio . 49
Table A.5 – Radio/Clock . 49
Table A.6 – Electronic equipment . 49
Table A.7 – Pager . 49
Table A.8 – Hearing aid . 50
Table A.9 – Photo . 50
Table A.10 – Portable lighting . 50
Table A.11 – Smoke detector . 51
Table A.12 – Toy (motor) . 51
Table A.13 – Remote control. 51
Table A.14 – Digital audio . 51
Table A.15 – Photo flash . 52
Table A.16 – Laser pointer . 52
Table A.17 – Portable stereo . 52
Table A.18 – CD/Electronic games. 52
Table A.19 – Digital still camera . 52
Table A.20 – Automatic camera . 52
Table A.21 – Tape recorder . 53
Table B.1 – Category 1 batteries.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.