FprEN IEC 61084-2-1:2024/FprAA:2024

SLOVENSKI STANDARD
oSIST prEN IEC 61084-2-1:2023/oprAA:2023
01-februar-2023
Sistemi kabelskih korit in sistemi kabelskih cevi za električne inštalacije - 2-1. del:
Posebne zahteve - Sistemi kabelskih korit in sistemi kabelskih cevi za montažo na
stene in strope - Dopolnilo AA
Cable trunking systems and cable ducting systems for electrical installations - Part 2-1:
Particular requirements - Cable trunking systems and cable ducting systems intended for
mounting on walls and ceilings
Elektroinstallationskanalsysteme für elektrische Installationen - Teil 2-1: Besondere
Anforderungen für Elektroinstallationskanalsysteme für Wand und Decke
Systèmes de goulottes et systèmes de conduits-profilés pour installations électriques -
Partie 2-1 : Exigences particulières - Systèmes de goulottes et systèmes de conduits-
profilés prévus pour être montés sur les murs et les plafonds
Ta slovenski standard je istoveten z: prEN IEC 61084-2-1:2022/prAA
ICS:
29.120.10 Inštalacijske cevi za Conduits for electrical
električne namene purposes
oSIST prEN IEC 61084-2- en
1:2023/oprAA:2023
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 61084-2-1:2023/oprAA:2023

oSIST prEN IEC 61084-2-1:2023/oprAA:2023

EUROPEAN STANDARD DRAFT
prEN IEC 61084-2-1:2022
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
December 2022
ICS 29.060.01; 29.120.10 -
English Version
Cable trunking systems and cable ducting systems for electrical
installations - Part 2-1: Particular requirements - Cable trunking
systems and cable ducting systems intended for mounting on
walls and ceilings
Systèmes de goulottes et systèmes de conduits-profilés Elektroinstallationskanalsysteme für elektrische
pour installations électriques - Partie 2-1 : Exigences Installationen - Teil 2-1: Besondere Anforderungen für
particulières - Systèmes de goulottes et systèmes de Elektroinstallationskanalsysteme für Wand und Decke
conduits-profilés prévus pour être montés sur les murs et
les plafonds
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 61084-2-1:2022; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2023-03-03.

It has been drawn up by CLC/TC 213.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 72104 Ref. No. prEN IEC 61084-2-1:2022/prAA E

oSIST prEN IEC 61084-2-1:2023/oprAA:2023
prEN IEC 61084-2-1:2022/prAA:2022 (E)
European foreword
This document (prEN IEC 61084-2-1:2022/prAA:2022) has been prepared by CLC/TC 213 “Cable
management systems”.
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of (doa) dor + 6 months
this document has to be announced at
national level
• latest date by which this document has (dop) dor + 12 months
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) dor + 60 months
standards conflicting with this document
have to be withdrawn
This document is used in conjunction with prEN IEC 61084-1:2022 and prEN IEC 61084-1:2022/prAA:2022.
This document has been prepared under a Standardization Request given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an integral part of this
document.
oSIST prEN IEC 61084-2-1:2023/oprAA:2023
1 Modification to Clause 2, “Normative references”
Replace “ISO 536:2012, Paper and board – Determination of grammage” by
“ISO 536:2019, Paper and board – Determination of grammage”
2 Modification to Clause 9, “Construction”
In “9.102 Contact between liquids and insulated conductors and live parts”:
replace “ISO 535” by “ISO 535:2014” and replace “ISO 536” by “ISO 536:2019”.
3 Modification to Clause 10, “Mechanical properties”
In “10.2.1 General test conditions”:
replace in the sixth paragraph “class 5, Table 3” by “Table 3 - class 5”.
In “10.4 Linear deflection test”:
replace in the eight paragraph “class 5 Table 3” by “Table 3 - class 5”.

oSIST prEN IEC 61084-2-1:2023/oprAA:2023
prEN IEC 61084-2-1:2022/prAA:2022 (E)
4 Addition of Annex C, “Compliance checks to be carried out for cable trunking
systems and cable ducting systems currently complying with EN 50085-2-1:2006
in order to comply with prEN IEC 61084-2-1:2022”
Add the following Annex C:
“
Annex C
(normative)
Compliance checks to be carried out for cable trunking systems and
cable ducting systems currently complying with EN 50085-2-1:2006 in
order to comply with prEN IEC 61084-2-1:2022
This normative annex relates to prEN IEC 61084-2-1:2022 requirements. It informs where compliance checks
are required
...