EN 60603-7-1:2011

SLOVENSKI STANDARD
01-september-2011
1DGRPHãþD
SIST EN 60603-7-1:2010
Konektorji za elektronsko opremo - 7-1. del: Podrobna specifikacije za 8-redne,
zaslonjene, proste in fiksne konektorje
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded,
free and fixed connectors
Steckverbinder für elektronische Einrichtungen - Teil 7-1: Bauartspezifikation für
geschirmte freie und feste Steckverbinder, 8polig
Connecteurs pour équipements électroniques - Partie 7-1: Spécification particulière pour
les fiches et les embases blindées à 8 voies
Ta slovenski standard je istoveten z: EN 60603-7-1:2011
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60603-7-1
NORME EUROPÉENNE
June 2011
EUROPÄISCHE NORM
ICS 31.220.10 Supersedes EN 60603-7-1:2009

English version
Connectors for electronic equipment -
Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
(IEC 60603-7-1:2011)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Partie 7-1: Spécification particulière pour Teil 7-1: Bauartspezifikation für
les fiches et les embases écrantées à 8 geschirmte freie und feste Steckverbinder,
voies 8polig
(CEI 60603-7-1:2011) (IEC 60603-7-1:2011)

This European Standard was approved by CENELEC on 2011-05-12. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60603-7-1:2011 E
Foreword
The text of document 48B/2163/CDV, future edition 3 of IEC 60603-7-1, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60603-7-1 on 2011-05-12.
This European Standard supersedes EN 60603-7-1:2009.
EN 60603-7-1:2009:
– the correction, or inclusion, of technical references;
– the harmonization of terminology with other parts of the EN 60603-7 series and other referenced
documents;
– the modification of screen dimensions so as to include connectors on the market;
– the inclusion of two new test groups (EP and FP) that provides the necessary cascading and
references to other parts of the EN 60603-7 series, and satisfies the requirements of ISO/IEC 11801
to enable correct referencing.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-02-12
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-05-12
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60603-7-1:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1 NOTE  Harmonized as EN 60068-1.
IEC 60603-7-7 NOTE  Harmonized as EN 60603-7-7.
IEC 60603-7-71 NOTE  Harmonized as EN 60603-7-71.
__________
- 3 - EN 60603-7-1:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60068-2-38 - Environmental testing - EN 60068-2-38 -
Part 2-38: Tests - Test Z/AD: Composite
temperature/humidity cyclic test

IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements
IEC 60512-1 - Connectors for electronic equipment - Tests EN 60512-1 -
and measurements -
Part 1: General
IEC 60512-1-100 - Connectors for electronic equipment - Tests EN 60512-1-100 -
and measurements -
Part 1-100: General - Applicable publications

IEC 60603-7 2008 Connectors for electronic equipment - EN 60603-7 2009
Part 7: Detail specification for 8-way,
unshielded, free and fixed connectors

IEC 60603-7 Series Connectors for electronic equipment EN 60603-7 Series

IEC 60664-1 - Insulation coordination for equipment within EN 60664-1 -
low-voltage systems -
Part 1: Principles, requirements and tests

IEC 62153-4-12 - Metallic communication cable test methods - - -
Part 4-12: Electromagnetic compatibility
(EMC) - Coupling attenuation or screening
attenuation of connecting hardware -
Absorbing clamp method
ISO 1302 - Geometrical Product Specifications (GPS) - EN ISO 1302 -
Indication of surface texture in technical
product documentation
IEC 60603-7-1 ®
Edition 3.0 2011-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment –
Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

Connecteurs pour équipements électroniques –
Partie 7-1: Spécification particulière pour les fiches et les embases écrantées à
8 voies
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX T
ICS 31.220.01 ISBN 978-2-88912-446-6

– 2 – 60603-7-1  IEC:2011
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 General . 7
1.1 Scope . 7
1.2 Normative references . 7
2 Terms and definitions . 7
3 Common features and isometric view . 8
3.1 Isometric view . 8
3.2 Mating information . 8
3.2.1 General . 8
3.2.2 Fixed connector . 9
3.2.3 Free connector . 10
4 Cable terminations and internal connections – Fixed and free connectors . 11
4.1 Internal connections . 11
4.2 Cable termination . 11
5 Gauges . 11
6 Characteristics . 11
6.1 General . 11
6.2 Pin and pair grouping assignment . 11
6.3 Classification into climatic category . 11
6.4 Electrical characteristics . 12
6.4.1 Creepage and clearance distances . 12
6.4.2 Voltage proof . 12
6.4.3 Current-carrying capacity. 12
6.4.4 Initial contact resistance – Interface only (separable fixed and free
contact) . 12
6.4.5 Input to output d.c. resistance . 12
6.4.6 Input to output d.c. resistance unbalance. 12
6.4.7 Initial insulation resistance . 13
6.4.8 Transfer impedance . 13
6.4.9 Coupling attenuation . 13
6.5 Mechanical . 13
6.5.1 Mechanical operation . 13
6.5.2 Insertion and withdrawal forces . 13
7 Tests and test schedule . 13
7.1 General . 13
7.2 Arrangement for contact resistance tests . 14
7.3 Arrangement for vibration tests. 14
7.4 Test procedures and measuring methods . 14
7.5 Preconditioning . 14
7.6 Wiring and mounting of specimens . 14
7.6.1 Wiring . 14
7.6.2 Mounting . 14
7.7 Test schedules . 14
7.7.1 Basic (minimum) test schedule . 14
7.7.2 Full test schedule . 14

60603-7-1  IEC:2011 – 3 –
Annex A (normative) Gauging continuity test. 21
Bibliography . 25

Figure 1 – Isometric view . 8
Figure 2 – Fixed connector details . 9
Figure 3 – Free connector view . 10
Figure A.1 – Gauge. 23
Figure A.2 – Gauge insertion . 24

Table 1 – Dimensions for Figure 2 . 10
Table 2 – Dimensions for Figure 3 . 11
Table 3 – Creepage and clearance distances . 12
Table 4 – Test group P .
...