EN 60695-2-10:2001
(Main)Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
Specifies the glow-wire apparatus and common test procedure to simulate the effect of thermal stresses which may be produced by heat sources such as glowing elements or overleaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. The test described in this standard is applicable to electrotechnical equipment, its subassemblies and components, and may also be applied to solid electrical insulating materials or other solid combustible materials. Has the status of a basic safety publication in accordance with IEC Guide 104.
Prüfungen zur Beurteilung der Brandgefahr - Teil 2-10: Prüfungen mit dem Glühdraht - Glühdrahtprüfeinrichtungen und allgemeines Prüfverfahren
Essais relatifs aux risques du feu - Partie 2-10: Essais au fil incandescent/chauffant - Appareillage et méthode commune d'essai
Spécifie un appareil d'essai au fil incandescent et une procédure d'essai commune pour simuler l'effet de contraintes thermiques qui peuvent être produites par des sources de chaleur telles que des éléments incandescents ou des résistances surchargées, sur des courtes durées, afin d'évaluer de façon simulée les risques du feu. L'essai décrit dans cette norme est applicable aux matériels électrotechniques, à leurs sous-ensembles et à leurs composants; il peut aussi être appliqué aux matériaux isolants électriques solides ou à d'autres matériaux combustibles. A le statut d'une publication fondamentale de sécurité conformément au Guide 104 de la CEI.
Preskušanje požarne ogroženosti - 2-10. del: Preskusne metode z žarilno žico - Aparat z žarilno žico in postopek splošnega preskusa (IEC 60695-2-10:2000)
General Information
- Status
- Withdrawn
- Publication Date
- 03-Jan-2001
- Withdrawal Date
- 31-Oct-2003
- Technical Committee
- CLC/SR 89 - Fire hazard testing
- Drafting Committee
- IEC/TC 89 - IEC_TC_89
- Parallel Committee
- IEC/TC 89 - IEC_TC_89
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-May-2016
- Completion Date
- 14-May-2016
- Directive
- Not Harmonized2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)OJ Ref: C 71/17, C 71/17, C 71/17, C 71/17, C 71/17, C 71/ OJ Date: 28-Nov-2013
Harmonized Standard2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limitsOJ Ref: C 249/03, C 249/03, C 249/03, C 249/03, C 249/03,, OJ Date: 08-Jul-2016
Not Harmonized73/23/EEC - Electrical equipment designed for use within certain voltage limitsOJ Ref: C 208
Relations
- Effective Date
- 29-Jan-2023
- Effective Date
- 28-Jan-2023
- Effective Date
- 10-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Referred By
EN 62314:2006 - Solid-state relays - Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
Intertek Testing Services NA Inc.
Intertek certification services in North America.
NSF International
Global independent organization facilitating standards development and certification.
UL Solutions
Global safety science company with testing, inspection and certification.
Sponsored listings
Frequently Asked Questions
EN 60695-2-10:2001 is a standard published by CLC. Its full title is "Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure". This standard covers: Specifies the glow-wire apparatus and common test procedure to simulate the effect of thermal stresses which may be produced by heat sources such as glowing elements or overleaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. The test described in this standard is applicable to electrotechnical equipment, its subassemblies and components, and may also be applied to solid electrical insulating materials or other solid combustible materials. Has the status of a basic safety publication in accordance with IEC Guide 104.
Specifies the glow-wire apparatus and common test procedure to simulate the effect of thermal stresses which may be produced by heat sources such as glowing elements or overleaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. The test described in this standard is applicable to electrotechnical equipment, its subassemblies and components, and may also be applied to solid electrical insulating materials or other solid combustible materials. Has the status of a basic safety publication in accordance with IEC Guide 104.
EN 60695-2-10:2001 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products; 29.020 - Electrical engineering in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60695-2-10:2001 has the following relationships with other standards: It is inter standard links to EN 60695-2-1/0:1996, EN 60695-2-10:2013, ISO 4046:1978, EN ISO 3743-1:1995, EN ISO 13943:2000, EN 60584-1:1995, EN 60695-2-13:2001, EN 60584-2:1993, EN 60695-2-12:2001, EN 60695-2-11:2001, EN 62314:2006, EN 62931:2017, EN 60320-1:2015/A1:2021, EN 62477-1:2012, EN 62094-1:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60695-2-10:2001 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 60695-2-10:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2002
1DGRPHãþD
SIST EN 60695-2-1/0:1999
Preskušanje požarne ogroženosti - 2-10. del: Preskusne metode z žarilno žico -
Aparat z žarilno žico in postopek splošnega preskusa (IEC 60695-2-10:2000)
Fire hazard testing -- Part 2-10: Glowing/hot-wire based test methods - Glow-wire
apparatus and common test procedure
Prüfungen zur Beurteilung der Brandgefahr -- Teil 2-10: Prüfungen mit dem Glühdraht -
Glühdrahtprüfeinrichtungen und allgemeines Prüfverfahren
Essais relatifs aux risques du feu -- Partie 2-10: Essais au fil incandescent/chauffant -
Appareillage et méthode commune d'essai
Ta slovenski standard je istoveten z: EN 60695-2-10:2001
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.020 Elektrotehnika na splošno Electrical engineering in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
-------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...